Make: Colt

Model: Single Action Army (SAA) – Early 3rd Generation

Serial Number: SA14139

Year of Manufacture: 1979

Caliber: .45 Colt

Action Type: Single Action Revolver with a Side-Loading Gate and a Fixed Cylinder

Barrel Length: 7.5”

Sights / Optics: The front sight is a blade fixed to the barrel. The rear sight is a square-notch in the top strap.

Grip Configuration & Condition: The grips are smooth rosewood with Colt Custom Shop medallions. The grips have no notable wear or damage. There are no chips or cracks. Overall, the grips are in Excellent condition.

Type of Finish: Blued Barrel & Cylinder with Case Colored Frame and Fire-Blued Screws, Trigger, and Cylinder Pin

Finish Originality: Original

Bore Condition: The bore is bright, and the rifling is sharp. There is no visible erosion or fouling. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This revolver retains 99%+ of its original finish. There is no notable wear or damage, appearing to have seen little if any use outside the factory. The case coloring on the frame is vivid, and the fire-blued screws, trigger, and cylinder pin are striking. The screw heads are sharp, and the markings are crisp. Overall, this revolver rates in Excellent condition.

Mechanics: The action functions correctly. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This revolver comes in a faux-wood cardboard Colt box with serial-matching label (notes Rosewood grips) and manual.

Our Assessment: The Colt Single Action Army is one of the most legendary revolvers in American history, and this Early 3rd Generation example from 1979 represents one of the finest renditions of the classic design. Featuring a 7.5-inch barrel, stunning case-colored frame, and fire-blued accents, this revolver was clearly produced with attention to detail and high-quality craftsmanship.

What makes this example particularly impressive is its 99%+ condition, lack of a turn line on the cylinder, and apparent factory-fired-only status. Most SAAs, even when well cared for, develop handling marks and rotation wear over time—this one has been meticulously preserved. The Custom Shop rosewood grips with Colt medallions further add to its collectability and appeal.

Colt SAAs in this condition continue to rise in value, making them not only outstanding collectibles but also exceptional long-term investments. Whether you are a Colt enthusiast, a collector of fine revolvers, or someone looking for a pristine example of an iconic American firearm, this Early 3rd Gen 1979 Colt SAA is a spectacular find.

Make: Colt

Model: New Frontier Single Action Army

Serial Number: 14435NF

Year of Manufacture: 1981

Caliber: .44-40 WCF

Action Type: Single Action Revolver with Side Loading Gate

Barrel Length: 7 1/2”

Sights / Optics: The front sight is a serrated ramped blade integral to a serrated ramped base fixed to the barrel. The rear sight is a square notch leaf in a fully adjustable base pinned to the rear of the top strap.

Grip Configuration & Condition: The grips are two-piece smooth wood with gold-colored Colt medallions. The inside of each panel is marked 14435NF, matching the revolver’s serial number. There are a couple of faint scuffs and hairline scratches, mostly on the bottom faces, with some scattered light handling marks. The grips rate in Fine Plus condition.

Type of Finish: Blue and Case Color

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This revolver retains about 97% of its metal finish. The backstrap and frontstrap are marked with the serial number. The front face of the cylinder is marked “44-40,”. There are a few little nicks and scratches, most notably on the right side of the barrel in front of the ejector rod housing. There are a few spots of faint frost on the bright side of the hammer, hardly noticeable. Some areas on the frame show slight muting of the case color. There are a couple of tiny marks through the finish on the grip frame and trigger guard. The cylinder has a few tiny marks through the finish and a faint turn line. There are some scattered light handling marks. The screw heads are sharp. The markings are clear. Overall, this revolver is in Fine Plus condition.

Mechanics: The action functions correctly. The cylinder locks in each position with light play. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: In 1960, as America looked forward to a new era, Colt sought to introduce a revolver reflecting both tradition and innovation. The New Frontier was an evolution of the legendary Single Action Army, featuring a flattop design with fully adjustable sights, giving shooters enhanced accuracy while retaining the classic SAA frame. First introduced in 1961, the New Frontier was produced in limited numbers across two runs, the second from 1978 to 1982.

Chambered in .44-40, this revolver offers a balance of power and accuracy with its 7 1/2” barrel, making it an excellent choice for target shooting or hunting. The Colt Royal Blue finish and color case-hardened frame give it a refined, collector-worthy appearance. Despite some minor wear, this revolver remains in Fine Plus condition, showing little evidence of extensive use.

One nice detail of this revolver is that the inside of both grip panels is marked 14435NF, matching the serial number. This suggests the grips are original to the gun, adding to its authenticity and collector appeal.

Whether you're a Colt enthusiast, a collector of classic revolvers, or someone looking for a high-quality shooter, this New Frontier is an excellent choice. With its combination of precision, power, and craftsmanship, it’s a revolver that stands out in any collection.

Make: Colt

Model: 1877 "Lightning"

Serial Number: 35248

Year of Manufacture: 1882 (Colt Archives Verified)

Caliber: .38 Colt

Action Type: Double / Single Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked "COLT D.A. 38." The left side of the frame is marked "PAT. SEPT. 19, 1871 / ”15”74 / JAN. 19, 1875," followed by the Rampant Colt in a circle emblem. The top of the barrel is marked "COLT'S PT. F.A. MFG. Co / HARTFORD CT. U.S.A." The bottom of the frame in front of the trigger guard is marked with the serial number "35248."

Barrel Length: 5”

Sights / Optics: The front sight is a fixed blade. The rear sight is a notch in the top strap.

Stock Configuration & Condition: The revolver is fitted with brown checkered hard rubber grips featuring Rampant Colt emblems. The grips remain in very good condition, showing only minor handling wear with crisp checkering.

Type of Finish: Case Colored Frame with Blued Barrel, Cylinder, and Grip Frame

Finish Originality: Original

Bore Condition: The bore is bright with strong rifling. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 70% of its original finish. There are scuffs and scratches throughout, with some fading of the case coloring but still visible on the frame. The cylinder shows a turn line but remains bright blue. The grip frame and barrel exhibit strong bluing, making them enjoyable to observe. The markings remain clear and well-defined.

Mechanics: The action functions correctly. The cylinder locks up securely with minimal play. The double-action trigger pull is smooth, and the single-action break is crisp. We did not fire this revolver. As with all antique firearms, a thorough cleaning and inspection are recommended before handling.

Box, Paperwork & Accessories: None

Our Assessment: The Colt Model 1877 "Lightning" was Colt’s first double-action revolver, designed for speed and ease of use. The Lightning was chambered in .38 Colt, while its larger counterpart, the Thunderer, was chambered in .41 Colt. These revolvers saw significant use in the late 19th century, with famous owners including Billy the Kid and other lawmen and outlaws of the Old West.

This example, manufactured in 1882 per the Colt Archives, retains 70% of its original finish, with strong case coloring still visible on the frame and vibrant bluing on the barrel, grip frame, and cylinder. The bore remains in excellent condition, rating 9/10, making this a great piece for collectors seeking a functional example of this historic revolver.

The checkered hard rubber grips with Rampant Colt emblems are in very good shape, and the revolver remains mechanically sound, with proper lock-up and smooth double-action function.

For collectors of Colt revolvers, Old West enthusiasts, or those looking for a fine example of a historical Colt double-action revolver, this Colt Model 1877 "Lightning" is a superb find, embodying the craftsmanship and ingenuity of Colt’s early revolver designs.

Make: Colt

Model: 1877 Double Action Lightning

Serial Number: 154376

Year of Manufacture: 1904

Caliber: .38 Colt

Action Type: Double Action / Single Action Revolver with Six-Shot Cylinder

Markings: The barrel is marked ""COLT'S PT. F.A. MFG. CO. / HARTFORD, CT. U.S.A."" and "".38 DA COLT."" Matching serial number ""154376"" appears stamped on the frame, trigger guard, and grip strap. The left side of the frame bears Colt’s three-line patent dates. Additional inspector marks and proofs appear throughout.

Barrel Length: 3.5” (Front sight replaced with a taller blade)

Sights / Optics: Front Sight: Tall blade replacement, fixed to the barrel. Rear Sight: A notch integral to the top strap.

Grip Configuration & Condition:
Two-piece checkered black hard rubber grips embossed with Rampant Colt medallions. The grips exhibit minor handling marks but no significant cracks or damage, fitting securely. Overall, grips rate in Very Good condition.

Type of Finish: Blued Barrel, Cylinder, Trigger Guard, and Backstrap with Case-Colored Frame and Fire-Blue Small Parts

Finish Originality: Original (except replaced front sight)

Bore Condition: The bore is bright with defined rifling and shows no signs of erosion throughout. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains approximately 65% of its original finish. The case-colored frame has transitioned largely to a pleasant gray-tan patina. The barrel, cylinder, trigger guard, and grip frame retain noticeable original blue finish intermingled with light oxidation and tan patina consistent with age and use. The fire-blue finish on the screws remains bold, offering striking contrast. The revolver displays expected wear consistent with honest use, yet maintains a pleasing appearance. Markings remain clear and legible, and screw heads remain sharp. Overall, this revolver rates in Very Good condition.

Mechanics: The action does not function properly. The revolver improperly fires from the half-cock position, indicating internal mechanical wear or damage requiring repair. The cylinder advances and locks with slight play, typical for this model. The trigger must be manually reset. We did not fire this revolver. Due to mechanical issues, professional gunsmith evaluation and repair is recommended before any use. As with all firearms, thorough cleaning and inspection is recommended.

Box, Paperwork & Accessories: None

Our Assessment: The Colt Model 1877 Lightning was Colt’s first successful double-action revolver, widely recognized for its innovation, elegance, and handling characteristics. Popular among lawmen, gunfighters, and civilians alike, it remains an iconic piece of firearm history.

This particular revolver, manufactured in 1904 (serial number 154376), is an appealing example that showcases honest use and authentic aging, along with highly attractive fire-blue screws. Although it retains significant original finish and aesthetic charm, its action currently suffers from a mechanical issue, firing from the half-cock position—common to these historically delicate revolvers. A taller replacement front sight adds interest, perhaps intended for practical use or aiming assistance.

For collectors, enthusiasts, or historians, this Colt Lightning .38 offers potential as a restorable collectible or historical display piece. With proper gunsmith attention, it can regain functionality or remain preserved as an intriguing artifact of early double-action revolver technology.

Make: Colt

Model: 1877 Lightning

Serial Number: 95818

Year of Manufacture: 1894 (https://colt.com/serial-lookup)

Caliber: .38 Long Colt

Action Type: Single Action/Double Action Revolver with Side Loading Gate Cylinder

Markings: The left side of the barrel is marked “COLT. D. A. 38”. The top of the barrel is marked “COLT’S PT. F. A. MFG. Co. / HARTFORD. CT. U.S.A.”. The left side of the frame is marked “PAT. SEPT. 19, 1871 / “ “ 15, “ 74. / “ JAN. 19, “ 75.” and with a circled Rampant Colt logo. The underside of the frame at the grip frame, the front of the trigger guard just behind it, and the front underside edge of the backstrap are marked “95818”.

Barrel Length: 3 1/2”

Sights / Optics: The front sight is a blade fixed to the barrel. The rear sight is a “V” groove in the top strap.

Stock Configuration & Condition: The grips are checkered hard rubber on a bird’s head grip frame, with a Rampant Colt in an oval at the top of each panel. The grips have a few nicks and scratches. The checkering has smoothed slightly on the edges where they taper to a point. There is good detail in the Rampant Colts. There are no chips or cracks. Overall, the grips are in Good condition.

Type of Finish: Blue & Case Color Hardening

Finish Originality: Original

Bore Condition: The bore is dark and the rifling is defined where not interrupted by erosion. There is scattered erosion and pitting in the bore, mostly at the muzzle-end. In this writer’s opinion, the bore rates 6/10.

Overall Condition: This revolver retains about 15% of its metal finish. Most of the finish has worn to white. There is some surface oxidation. There are some nicks and scratches. There are trace amounts of fire-blue on the hammer and trigger. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The cylinder pin is marred at its knurled end. There are a few spots of erosion. The markings are clear. Overall, this revolver is in Fair condition.

Mechanics: The timing is off. Otherwise, the action functions correctly. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Colt M1877 double action revolver was manufactured from 1877 to 1909 for a total of 166,849 revolvers. The M1877 was offered in three calibers, which lent them three unofficial names: the “Lightning”, the “Thunderer”, and the “Rainmaker”. The principal difference between the models was the chambering: the “Lightning” in .38 LC, the “Thunderer” in .41 LC, and the “Rainmaker” in .32 LC. The M1877 was designed by one of the inventors of the M1873 Single Action Army “Peacemaker”, William Mason, as Colt’s first attempt at manufacturing a double action revolver, and it was also the first successful US-made double action cartridge revolver. None of those nicknames were official Colt designations, nor used by the factory in any reference materials. All of those terms were coined by Benjamin Kittredge, one of Colt’s major distributors. Old West outlaw John Wesley Hardin frequently used both “Lightning” and “Thunderer” versions of the Colt M1877 revolver. This scarce Lightning is one of the shorter barreled, ejectorless guns known as the “Sheriff’s” or “Storekeeper’s” model. With its 3 ½” barrel and lack of an ejector mechanism, it was easier to carry concealed or in a discrete manner compared to the longer barrel versions. The pistol also features the short cylinder arbor pin often found on later Sheriff’s models. This antique Lightning is from quite early in production and is in great shape for a nearly 130 year old gun. It retains about 15% of its factory blue and case color finish and a decent bore. This would be a great addition to a Colt collection. Please see our photos and good luck!

Make: E. Remington & Sons

Model: J.F. Thomas Patent Rifle Cane

Serial#: 136

Year of Manufacture: Antique (Circa 1859–1865)

Caliber: .31 Caliber Percussion

Action Type: Single-Shot, Percussion Ignition Rifle Cane with Removable Breech Section

Markings: Marked faintly "J.F. Thomas Patent Feb'y 9, 1858" “Remington & Son’s Illion NY” and serial number “136” on the muzzle shaft fitting.

Barrel Length: Approximately 9" internal rifled barrel; 28”shaft & 35.5” overall cane length.

Stock Configuration & Condition:

The cane shaft is coated with a thin, original gutta-percha (hard rubber) covering, showing none of the expected cracks or small chips. There are handling marks consistent with age and typical usage. The cane's handle is a replacement and not original to the piece. The metal fittings and ferrule appear original, exhibiting normal age and patina. Overall, the shaft and fittings remain in Very Good antique condition, with wear consistent with careful handling and age.

Type of Finish: Gutta-Percha (Hard Rubber) coating; Brass-lined internal barrel tube.

Finish Originality: Original gutta-percha shaft coating; handle is a later replacement.

Bore Condition:

The short internal rifled iron barrel is bright with sharply defined rifling. Minimal erosion is present near the breech. In this writer’s opinion, the bore rates approximately 8.5/10 for an antique firearm.

Overall Condition:

This rare Remington Rifle Cane retains the majority of its original gutta-percha finish, showing minor age-related wear, but no cracks and only handling marks typical of these delicate firearms. The metal components remain solid, displaying natural patina. All markings remain legible but faint due to their delicate original application. Overall, this Rifle Cane is in Very Good antique condition.

Mechanics:

The percussion firing mechanism functions correctly. The removable breech section unscrews easily to reveal the chamber area. This mechanism operates as originally intended, although no extraction or ejection mechanism exists, as designed. As with all antique firearms, inspection by a qualified gunsmith is advised before firing.

Box, Paperwork & Accessories: None.

Our Assessment:

Invented by John F. Thomas, Remington’s master mechanic, and patented on February 9, 1858, the Remington Rifle Cane represents one of the earliest American civilian firearms designed specifically for discreet personal protection. Approximately 500 percussion examples were produced between 1859 and 1865, making them among the rarest and most collectible concealed firearms today.

This innovative firearm ingeniously conceals its percussion mechanism completely within the gutta-percha-covered brass cane shaft. It features a rifled iron barrel of approximately nine inches in length hidden within the upper section of the cane. The lead ball traveled from this short rifled barrel into a brass-lined smooth tube toward the muzzle, ingeniously disguised as an elegant walking accessory. To load, the breech unscrewed from the barrel shaft, and after firing, spent percussion caps and powder residues required manual removal.

Serial number 136 places this firearm among the early percussion-production examples. Despite the replaced handle, it remains historically significant due to its scarcity, originality, and condition. Its subtle elegance and practical ingenuity reflect Remington's dedication to innovation during an era that prized both form and function. For collectors specializing in Remington firearms, Civil War-era weaponry, or unique concealed weapons, this rifle cane represents a rare and highly desirable piece of American firearm history.

Make: E. Remington & Sons

Model: No. 1 Sporter

Serial Number: 6127

Year of Manufacture: 1879-1888

Caliber: Bottlenecked .40 Cal. (Most Likely .40-70 Sharps Bottleneck, Please Cast Chamber To Confirm.)

Action Type: Single shot rolling block with extractor

Markings: The left side of the receiver is marked with an 1873 patent date roll mark. The bottom tang is marked, “6127”. The barrel is marked with a partially cut off E. Remington & Sons roll mark.

Barrel Length: 28.25” Half-Octagon

Sights / Optics: The front sight is a hooded Globe style sight with a tall post insert dovetailed to the barrel. The rear sight is a flip-up adjustable Vernier diopter tang sight. The back of the barrel has a dovetail slot that has been filled in with an insert.

Stock Configuration & Condition: The stock is a two piece walnut set with a metal tipped forend, checkered straight wrist, straight comb, and a checkered horn shotgun-style buttplate. There are moderate handling marks throughout. There are no cracks. The LOP measures 13 3/4” from the front of the trigger to the back of the buttplate. The stock rates in about Very Good to Fine overall condition as an antique.

Type of Finish: Blued, Case Color

Finish Originality: Original

Bore Condition: The bore is gray and the rifling is mostly strong throughout. There is moderate erosion in the bore along with light pitting. In this writer’s opinion the bore rates 7.5/10 as an Antique.

Overall Condition: This rifle retains about 10% of its metal finish. The frame has mostly faded, but there are still a few spots of case color. There are some light pitting marks throughout. The remaining finish on the barrel has turned to patina. The screw heads show moderate use. The markings are mostly clear. Overall, this rifle rates in about Good condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington No. 1 Rolling Block Sporter, manufactured between 1879 and 1888, is a quintessential example of the American single-shot sporting rifle from the late 19th century. Built on Remington’s time-tested No. 1 rolling block action, this rifle was designed for accuracy, durability, and ease of use, making it popular with frontiersmen, long-range shooters, and big game hunters alike. Chambered in a bottlenecked .40 caliber cartridge—most likely .40-70 Sharps Bottleneck, though the chamber should be cast to confirm—this rifle would have been capable of excellent range and knockdown power, particularly when paired with the precision sights found on this example. This rifle has a number of desirable features from its checkered straight wrist to its horn shotgun-style buttplate, vintage globe and tang sights and half-octagon profile barrel. While the rifle shows age-related wear, the bore retains mostly strong rifling, and the action remains mechanically sound. The wood rates in Very Good to Fine condition, showing only typical handling marks with no cracks or major damage.

For collectors of antique American sporting rifles, single-shot enthusiasts, or long-range black powder shooters, this Remington No. 1 Sporter represents a rare and desirable piece of firearms history. With its strong shooting potential, elegant stock work, and excellent mechanical design, it stands as a testament to Remington’s craftsmanship during the golden age of American riflemaking. Whether admired as a display piece or carefully returned to the field for black powder cartridge shooting, this rifle offers a classic blend of utility and tradition that continues to appeal to enthusiasts well over a century after its manufacture.

Make: Remington

Model: 1871

Serial Number: NSNV

Year of Manufacture: Circa, 1873

Caliber: .50-70 Black Powder

Action Type: Single shot rolling block with extractor

Markings: The top of the tang is marked with, “REMINGTONS’ ILION N.Y. U.S.A. PAT. MAY 3RD NOV 15TH 1864 APRIL 17TH 1866 AUG 27TH 1867 NOV 7TH 1871” The barrel bands and barrel are marked, “B”. The stock is marked with “E 45”. The buttplate is marked with, “E 45”. The stock cartouches are faded.

Barrel Length: 36”

Sights / Optics: The front sight is a blade post set into a raised base. The rear sight is a military #1 flip-up V-notch elevator/ladder.

Stock Configuration & Condition: The stock is a two piece wood set with a forend cap, barrel band w/ sling loop, barrel band, straight wrist, straight comb, and semi-crescent buttplate. There are scratches, pressure dents, and small chips throughout. The forend has several larger cracks at the receiver. The LOP measures 13 5/8” from the front of the trigger to the back of the buttplate. The stock rates in about Good overall condition as an antique. The stock has been refinished.

Type of Finish: Blued, Case color.

Finish Originality: Refinished

Bore Condition: The bore is gray and the rifling is somewhat pronounced. There is heavy erosion and moderate spots of pitting in the bore. In this writer’s opinion the bore rates 5/10.

Most antique firearms have bores that will show erosion. This is not only due to age but also to the use of black powder. When fired, black powder reacts corrosively. NRA Antique Firearm Conditions Standards are quite lenient for bores. In some cases, the NRA standards disregarded the bore’s condition for collector’s firearms.

Overall Condition: This rifle retains about 20% of its metal finish. The barrel is in the wight with a moderate patina. There is no case color remaining on the receiver. There are pinpricks of pitting throughout. The screw heads show moderate to heavy use. The markings are a bit faded. Overall, this rifle rates in about Very Good condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: Leather sling.

Our Assessment: This Remington Model 1871 Rolling Block rifle is a significant piece of American post-Civil War military history, made for the New York State Militia around 1873. Chambered in the powerful .50-70 Government black powder cartridge, this rifle was part of a contract specifically for state-level forces, produced during a period when the U.S. military was transitioning from muzzleloaders to more modern breechloading systems. The Model 1871 featured improvements over earlier rolling block variants, including a redesigned extractor and a beefier receiver. Marked with Remington’s series of patent dates and military inspection stamps, this example speaks to the craftsmanship and reliability that made the rolling block a preferred design for both domestic and international service. This example rates in about Very Good condition for an antique and retains approximately 20% of its metal finish. The barrel is now in the white, showing a consistent and even patina, while the receiver has lost its original case coloring. There is scattered pinprick pitting across metal surfaces, and the screw heads show moderate to heavy tool marks. The bore is gray with somewhat pronounced rifling, though it exhibits heavy erosion and moderate pitting, earning a 5/10 in this writer’s opinion. The stock has been refinished and shows wear typical of age and service, with pressure dents, small chips, and multiple cracks at the forend near the receiver. Still, it remains solid, and its original military unit markings “E 45” are visible on both the stock and buttplate.

Despite its age and signs of field use, this Remington M1871 remains a valuable example of one of the more sought-after U.S. rolling block models. Its long 36” barrel, robust action, and large-bore .50-70 chambering make it an imposing rifle that would have served well in militia service. For collectors of American military long arms or those focused on rolling block development, this piece offers an increasingly scarce example of state-issued post-war firepower. It’s a worthy addition to any historical firearms collection and stands as a testament to the enduring strength of Remington’s legendary single-shot action.

Model: 1901

Serial Number: NSNV

Year of Manufacture: 1901 to 1911

Caliber: 7x57mm (7mm Mauser)

Action Type: Single shot rolling block with extractor.

Markings: The top of the receiver is marked with the serial number. The tang is marked with 1901 patent dates. The barrel is marked, “CAL 7M.M.”. There are various small proofs throughout.

Barrel Length: 30”

Sights / Optics: The front sight is a barleycorn post dovetailed into a raised base. The rear sight is a flip-up Edward’s patent V-notch escalator sight.

Stock Configuration & Condition: The stock is a three piece wood set with a forend cap, bayonet lug & barrel band with sling loop. Barrel band, straight wrist, sling loop, straight comb, and steel buttplate. There are pressure dents, small chips, and pressure dents throughout. The top handguard has a sizable crack through the top. The LOP measures 13.25” from the front of the trigger to the back of the buttplate. The stock rates in about Good to Very Good overall condition. The cleaning rod is missing.

Type of Finish: Blued, Case Color.

Finish Originality: Original

Bore Condition: The bore is light gray and the rifling is mostly pronounced. There is moderate erosion and some faint spots of pitting in the bore. In this writer’s opinion the bore rates 7.5/10.

Overall Condition: This rifle retains about 25% of its metal finish. The barrel retains a decent amount of bluing along with a moderate patina. There are small spots of rust throughout and pricks of pitting on the receiver. There is no remaining case color on the receiver. The action has moderate wear. The screw heads are mostly sharp. The markings are blurry in spots. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington Model 1901 Rolling Block rifle, chambered in 7x57mm Mauser, is a fascinating example of a transitional-era military long arm produced during Remington’s final years of military rolling block production. These Model 1901s were derived from the No. 5 action, built with smokeless powder pressures in mind, and widely exported to South America, notably to countries like Mexico, Uruguay, and Chile. Manufactured between 1901 and 1911, this rifle reflects Remington’s ability to adapt a classic single-shot platform to contemporary needs, offering an extremely robust, simple, and cost-effective solution in a world rapidly embracing bolt-action repeaters. This example shows clear signs of honest service use and remains in Good overall condition. It retains approximately 25% of its original metal finish, with scattered bluing still visible on the barrel and a uniform, moderate patina forming across the remaining surfaces. The receiver has lost its original case color and shows pitting and light rust in areas, consistent with long-term storage or field exposure. The bore, while no longer pristine, is light gray with mostly pronounced rifling and moderate erosion, rating 7.5/10. The stock has been well-used, showing pressure dents, scattered chips, and a crack in the handguard, but remains structurally intact with its original bayonet lug, sling hardware, and buttplate still present.

Despite the cosmetic wear, the action is fully functional and the rifle remains an important historical piece. It serves as a bridge between the black powder 19th century and the bolt-action smokeless age, and as such, will appeal to collectors interested in transitional firearms and Remington’s global military footprint. For enthusiasts of South American martial arms, or for those collecting military rolling blocks, this example offers authentic patina, original configuration, and the durable spirit of one of Remington’s most enduring designs. With its 30" barrel and potent 7mm chambering, this Model 1901 remains a testament to the lasting legacy of the rolling block action.

Make: Remington

Model: Type 4 1879

Serial Number: NSNV

Year of Manufacture: 1879 to 1895

Caliber: .43 Spanish

Action Type: Single shot rolling block with extractor.

Markings: The top of the barrel shank is marked, “MODELO ARGENTINO 1879 E.N.”. The tang markings are too faded to see. The barrel bands are marked, “U”.

Barrel Length: 36”

Sights / Optics: The front sight is a barleycorn post dovetailed into a raised base. The rear sight is a flip-up low ramp & ladder style sight.

Stock Configuration & Condition: The stock is a three piece wood set with a capped forend w/ barrel band & bayonet lug, barrel band w/ sling loop, barrel band, straight wrist, sling loop, straight comb, and semi-crescent steel buttplate. There are pressure dents, and small scratches throughout. There are small chips throughout. There are no cracks. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The stock rates in about Very Good overall condition. The stock is refinished.

Type of Finish: Blued

Finish Originality: Refinished

Bore Condition: The bore is bright and the rifling pronounced. There is faint erosion in the bore. In this writer’s opinion the bore rates 9.5/10.

Overall Condition: This rifle retains about 95% of its metal finish. The refinished bluing is very strong throughout, with light spots of rust throughout. The screw heads are lightly tooled. The markings are severely faded in spots. Overall, this rifle rates in about Excellent condition as a refinished Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Argentine Model 1879 Remington Rolling Block rifle is a classic example of 19th-century military collaboration, combining American engineering with South American military modernization. Produced under contract for the Argentine government, this rifle is chambered in .43 Spanish and was issued extensively between 1879 and the late 1890s. Built on the robust Type 4 rolling block action, these rifles were known for their simplicity, reliability, and power—traits that made them ideal for frontier service and extended military campaigns. The “MODELO ARGENTINO 1879 E.N.” marking on the barrel shank ties this rifle directly to the Ejército Nacional (National Army), making it a tangible piece of Argentina’s military development during a critical period. This example is in outstanding condition for an antique military rifle, retaining approximately 95% of its refinished blued metal finish. The bore is especially strong for its age—bright with pronounced rifling and only faint erosion, earning a 9.5/10 in this writer’s opinion. The refinished wood has typical wear from age, including pressure dents, small chips, and some repairs, along with cracks forming at the heel, but it remains sturdy and well-fitted. The full-length military furniture, including bayonet lug and sling loops, are all present. The rifle’s markings, though faded in some areas, still anchor it to its original Argentine contract heritage.

For collectors of South American military arms, black powder cartridge rifles, or rolling block variants, this Argentine M1879 offers high historical value and excellent preserved condition. Its mechanical integrity, brilliant bore, and striking appearance make it a desirable piece for both display and careful shooting. As these rifles become harder to find in such complete and original military configurations, this example represents a standout opportunity to acquire a well-preserved artifact from the golden era of rolling block service rifles.

Make: E. Remington & Sons

Model: Rolling Block

Serial Number: NSNV (No Serial Number Visible)

Year of Manufacture: Pre 1899

Caliber: .43 Spanish

Action Type: Single-Shot Rolling Block Rifle

Markings: The top tang clearly shows the three-line Remington address:
"E. REMINGTON & SONS. ILION, N.Y. U.S.A. / PAT. MAY 3D NOV 15TH 1864 APRIL 17TH 1866 / AUG 27TH 1867 NOV 7TH 1871."

Barrel Length: Approximately 35”

Sights / Optics: The front sight is a fixed blade. The rear sight is a ladder-style sight adjustable for elevation, typical of military Rolling Block rifles.

Stock Configuration & Condition: The walnut buttstock features unique custom trench art carvings, adding historical character. The wood shows moderate dings, scratches, handling marks, and areas of wear consistent with field use and age. The stock remains structurally solid but rates in Fair to Good condition overall. The rifle has brass barrel bands, a brass nose cap, and retains the original full-length brass ramrod.

Type of Finish: Originally "In-the-White" (now exhibiting patina)

Finish Originality: Original

Bore Condition: The bore is bright with clearly defined rifling, showing minor erosion throughout. In this writer’s opinion, the bore rates approximately 8/10.

Overall Condition: The metal surfaces, originally finished in-the-white, now display natural patina with areas of oxidation, erosion, and mild corrosion consistent with age and exposure. Brass fittings (barrel bands, nose cap, full-length brass ramrod) show an attractive aged patina. The receiver and barrel remain structurally sound with clearly legible tang markings. Overall, this rifle rates in Good antique condition.

Mechanics: The action functions properly. The rolling block mechanism locks securely, and the hammer and breechblock operate smoothly. As with all vintage firearms, a thorough inspection and cleaning are recommended prior to firing.

Box, Paperwork & Accessories: None.

Our Assessment:
The Remington Rolling Block rifle was renowned globally for its simplicity, durability, and reliability, widely adopted by numerous countries in the late 19th century. This example, chambered in .43 Spanish, was likely produced for export and saw active use internationally.

Notable features of this rifle include attractive brass furniture (full-length brass ramrod, barrel bands, and nose cap), indicative of a possible special-order or foreign contract variation. The unique trench art carved into the walnut buttstock provides additional historical appeal and insight into its former owner's experiences.

Although the wood is worn to Fair-Good condition, and the metal surfaces have aged naturally with patina and corrosion, the rifle retains a strong, shootable bore and fully functional mechanics. Collectors of military arms, Rolling Block rifles, or historical firearms with personalization will find this example especially interesting.

Make: Kjøbenhavn Tøjhuus, Denmark

Model: M1867/96

Serial Number: 57677

Year of Manufacture: 1880

Caliber: 11.35x51mmR Danish Centerfire (cases for this chambering can be made by re-working .45/70 brass)

Action Type: Single shot rolling block rifle with extractor.

Markings: The left side of the receiver is marked with a crown and, “M-1867”. The rear tang is marked, “Kjøbenhavn Tøjhuus 1880”. The barrel and stock are marked, “57677”. There are small proofs throughout. The stock has a “G.C.” marking on the top of the comb.

Barrel Length: 35 1/4”

Sights / Optics: The front sight is a blade dovetailed to a barrel mounted base. The rear sight is a flip-up V-notch ladder sight marked out to 21.

Stock Configuration & Condition: The stock is a two piece wood set with a capped forend & ramrod, barrel band, barrel band with sling loop, barrel band, straight wrist, straight comb, sling loop, with semi-crescent buttplate. There are pressure dents and scratches throughout. There are no cracks. The LOP measures 12 1/2” from the front of the trigger to the back of the buttplate. The stock rates in about Fine Plus overall condition as an antique.

Type of Finish: Case Color, Blued

Finish Originality: Original

Bore Condition: The bore is bright and the rifling pronounced. There is little to no erosion in the bore. In this writer’s opinion the bore rates 10/10 for an antique.

Overall Condition: This rifle retains about 20% of its metal finish. The receiver retains some light spots of case color. There are spots of bluing underneath the barrel bands and stock. Most of the exposed finish has turned to patina. The action has light wear. The screw heads are sharp. The markings are clear. Overall, this rifle rates in about Excellent condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements. This rifle has been factory converted to centerfire.

Box, Paperwork & Accessories: None.

Our Assessment: This Danish Remington Rolling Block M1867/96, chambered in 11.35x51mmR Danish centerfire, is a rare and historically significant example of European military adoption of the iconic Remington rolling block action. Originally manufactured at Kjøbenhavn Tøjhuus (Copenhagen Arsenal) in 1880, this rifle was part of Denmark’s effort to modernize its arsenal by converting earlier M1867 rimfire rifles to centerfire configuration during the 1896 refurbishment program. The model designation M1867/96 refers to this arsenal conversion, which allowed continued use of the Remington action while transitioning to more modern centerfire ammunition. With its 35 1/4" barrel, robust military stock, and ladder rear sight graduated out to 2,100 meters, this rifle was built for precision at long range, even by late 19th-century standards. This example is in exceptional condition as antique, retaining about 20% of its original metal finish. Most of the exposed surfaces have developed a smooth, dark patina, adding to the rifle’s antique character. The bore is superb, rating 10/10, with bright lands and sharp rifling. The walnut stocks, with their matching serial number and military hardware, remain solid and well-preserved. The presence of the original cleaning rod, sling swivels, and crisp markings, including the Kjøbenhavn Tøjhuus 1880 tang stamp, further enhance its collector value.

For collectors of European military firearms, Remington rolling blocks, or antique rifles, this Danish M1867/96 is an outstanding acquisition. Its original configuration, exceptional bore, and centerfire conversion make it not only a historically important rifle but also a potential shooter for those who reload or hand-cast 11.35mm cartridges. Whether displayed for its craftsmanship, preserved for its rarity, or carefully taken to the range, this rifle is a superb example of late 19th-century military engineering and a testament to the lasting legacy of the Remington rolling block system.

Make: Kjøbenhavn Tøjhuus, Denmark

Model: M1867/96

Serial Number: 53397

Year of Manufacture: 1878

Caliber: 11.35x51mmR Danish Centerfire (cases for this chambering can be made by re-working .45/70 brass)

Action Type: Single shot rolling block rifle with extractor.

Markings: The left side of the receiver is marked with a crown and, “M-1867”. The rear tang is marked, “Kjøbenhavn Tøjhuus 1878”. The barrel and stock are marked, “53397”. There are small proofs throughout. The stock has a “G.C.” marking on the top of the comb and a small brass insert marked, “JR 422”.

Barrel Length: 35 1/4”

Sights / Optics: The front sight is a blade dovetailed to a barrel mounted base. The rear sight is a flip-up V-notch ladder sight marked out to 21.

Stock Configuration & Condition: The stock is a two piece wood set with a capped forend & ramrod, barrel band, barrel band with sling loop, barrel band, straight wrist, straight comb, sling loop, with a stippled semi-crescent buttplate. There are pressure dents and scratches throughout. There are no cracks. The LOP measures 12 1/2” from the front of the trigger to the back of the buttplate. The stock rates in about Fine Plus overall condition as an antique. The stock is refinished.

Type of Finish: Blued

Finish Originality: Refinished

Bore Condition: The bore is bright and the rifling pronounced. There is little to no erosion in the bore. In this writer’s opinion the bore rates 10/10 for an antique.

Overall Condition: This rifle retains about 95% of its metal finish. There are light spots of thinning and light patina throughout. The hammer and block are jeweled. The action has light wear. The screw heads are sharp. The markings are clear. Overall, this rifle rates in about Excellent condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements. This rifle has been factory converted to centerfire.

Box, Paperwork & Accessories: Leather sling.

Our Assessment: This Danish Remington Rolling Block M1867/96 is a superb example of a late 19th-century military conversion rifle, built at Kjøbenhavn Tøjhuus in 1878 and later arsenal-refurbished to fire smokeless centerfire ammunition. Originally designed as a rimfire rifle, this model was part of Denmark’s 1896 modernization effort, which economically converted thousands of M1867 rifles to use the more modern 11.35x51mmR centerfire cartridge. The result was the M1867/96—a rugged, accurate, and reliable long arm that extended the service life of the proven rolling block action in the age of smokeless powder. With its 35 1/4" barrel, ladder rear sight, and full military furniture, this rifle is both a historically important and mechanically capable platform. This example is in outstanding condition for a service rifle of its era. It retains approximately 95% of its new metal finish. The bore is exceptionally clean and bright, earning a rare 10/10 rating in this writer’s opinion. The wood has been refinished and remains structurally sound. Matching numbers on the barrel and stock, clear markings—including the “Kjøbenhavn Tøjhuus 1878” tang stamp—and the unique “JR 422” brass unit disc on the stock all contribute to its collector value. The hammer and breechblock have been jeweled, adding a unique aesthetic detail.

Whether you are a collector of European military arms, Remington rolling blocks, or smokeless black powder transition rifles, this Danish M1867/96 offers tremendous historical significance and condition rarity. Its original configuration, brilliant bore, and functional mechanics make it an ideal candidate for both display and careful shooting with handloaded ammunition. As a well-preserved artifact of Denmark’s arms development in the late 19th century, this rifle serves as a testament to both the ingenuity of military conversion programs and the enduring legacy of the Remington rolling block action.

Make: E. Remington & Sons

Model: Type 4 1879 Spanish Saddle Ring Carbine

Serial Number: NSNV

Year of Manufacture: 1879-1896

Caliber: .43 Spanish (11.15x57mmR)

Action Type: Single shot rolling block with extractor

Markings: The top receiver tang is marked with 1874 patent dates. The barrel is marked with a “B” proof.

Barrel Length: 20 3/8".

Sights / Optics: The front sight is a blade fixed to the barrel. The rear sight is a Spanish style carbine 2-position flip-up sight screwed to the barrel.

Stock Configuration & Condition: The stock is a two piece walnut set with a tapered forend, barrel band w/ sling loop, saddle ring & bar, straight wrist, straight comb, and semi-crescent buttplate. The LOP measures 13 3/4” from the front of the trigger to the back of the buttplate. The stock rates in about Very Good to Fine overall condition as replaced.

Type of Finish: Blued

Finish Originality: Refinished

Bore Condition: The bore is semi-bright and the rifling is mostly sharp. There is light erosion in the bore. In this writer’s opinion the bore rates 9/10 as an Antique.

Most antique firearms have bores that will show erosion. This is not only due to age but also to the use of black powder. When fired, black powder reacts corrosively. NRA Antique Firearm Conditions Standards are quite lenient for bores. In some cases, the NRA standards disregarded the bore’s condition for collector’s firearms.

Overall Condition: This rifle retains about 25% of its metal finish. The frame retains much of its bluing. There is moderate to heavy patina throughout. There are some light pitting marks throughout. The screw heads show moderate use. The markings are mostly clear. Overall, this rifle rates in about Very Good condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Spanish Remington 1879 Saddle Ring Carbine, chambered in .43 Spanish (11.15x57mmR), is a compelling example of a late 19th-century military carbine built on Remington’s rolling block action, one of the most robust and widely adopted single-shot rifle systems of its time. Originally produced between 1879 and 1896, this Type 4 carbine was designed for mounted troops, featuring a compact 20 3/8-inch barrel, saddle ring and bar, and rugged construction suitable for cavalry use. These carbines were contracted by Spain and saw extended service during a time of widespread military conflict and colonial expansion, both in Europe and abroad. The Remington rolling block design was renowned for its simplicity, strength, and ease of use, making it ideal for service in austere and demanding environments. This example retains approximately 25% of its refinished metal finish, with the receiver holding the strongest bluing, while the remainder has aged to a moderate patina with light pitting marks scattered throughout. The bore is in excellent condition for an antique, rating 9/10, with semi-bright lands and mostly sharp rifling, showing only light erosion—a rare feature in rifles of this age that were typically used with corrosive black powder ammunition. The two-piece walnut stock is a replacement set but has been well-fitted, showing only light wear and retaining the correct military profile including the semi-crescent buttplate, straight wrist, and barrel band with sling loop. The carbine-style rear sight and fixed front blade are intact, and the action functions correctly, a testament to the enduring strength of the Remington system.

For collectors of Spanish military arms, Remington rolling blocks, or antique carbines, this Spanish Model 1879 Saddle Ring Carbine is an attractive and historically significant piece. It represents a period when single-shot rifles were at the height of their evolution, just before the global shift to magazine-fed bolt actions. Whether admired as a display piece, used for black powder cartridge shooting, or added to a broader collection of Remington contract rifles, this saddle ring carbine offers both utility and collectible appeal, especially with its excellent bore and intact mechanical function.

Make: Remington Arms Co.

Model: 1902 Saddle Ring carbine

Serial Number: 308

Year of Manufacture: Circa, 1900s

Caliber: 7x57mm (7mm Mauser)

Action Type: Single shot rolling block with extractor.

Markings: The top of the receiver is marked with the serial number. The tang is marked with 1901 patent dates. The barrel is marked, “CAL 7M.M.”. There are various small proofs throughout.

Barrel Length: 20.5”

Sights / Optics: The front sight is a barleycorn post dovetailed into a raised base. The rear sight is a flip-up low ramp & ladder style V-notch sight.

Stock Configuration & Condition: The stock is a three piece wood set with a capped forend w/ bayonet lug, sling loop, & cleaning rod, barrel band, straight wrist, sling loop, straight comb, and steel buttplate. There are pressure dents and small scratches throughout. There are small chips and repairs throughout. There are cracks forming at the heel and forend. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The stock rates in about Very Good overall condition. The stock has been refinished.

Type of Finish: Blued, Case Color.

Finish Originality: Refinished

Bore Condition: The bore is light gray and the rifling pronounced. There is moderate erosion and some faint spots of pitting in the bore. In this writer’s opinion the bore rates 6/10.

Overall Condition: This rifle retains about 85% of its metal finish. The case color on the receiver is bright with only a few spots of fading, the barrel has light thinning and small spots of patina. The screw heads are sharp. The markings are mostly clear. Overall, this rifle rates in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Uruguayan Remington 1902 Rolling Block Saddle Ring Carbine is a rare and desirable military carbine based on the legendary rolling block action that was favored across the globe for its simplicity and strength. Produced for export and chambered in the then-modern 7x57mm Mauser smokeless cartridge, these short carbines were built to serve in South America's rugged terrain, offering compact maneuverability while retaining the robust performance Remington was known for. This example bears classic features of the contract model including the saddle ring and short 20.5” barrel, making it both historically and mechanically interesting. This carbine presents beautifully with about 85% of its metal finish remaining. The refinished stock shows honest field wear with a number of minor repairs, yet remains solid and functional. The bore, though showing some erosion, still has pronounced rifling and remains serviceable for black powder or reduced smokeless loads. The vivid case colors and intact Uruguayan markings confirm its authenticity and enhance its collector appeal. With its strong action, crisp trigger, and clean mechanical operation, it’s an ideal piece for military surplus collectors or those interested in South American contract arms.

Whether you're a collector of South American militaria, Remington exports, or antique military carbines, this Uruguayan 1902 is a fantastic addition. Compact, rugged, and steeped in turn-of-the-century history, it’s a tangible artifact of international arms development and a testament to the enduring design of the Remington rolling block.

Make: Remington

Model: Type 2 New Model

Serial Number: NSNV

Year of Manufacture: 1867-1871

Caliber: 20 Gauge

Action Type: Single shot rolling block with extractor

Markings: The tang is marked with an 1866 patent date.

Barrel Length: 30.5” Fixed Cyl Choke

Sights / Optics: The front of the barrel has a brass bead. The chamber ring has a sighting groove.

Stock Configuration & Condition: The stock is a two piece walnut set with a straight wrist, fluted straight comb, and a buttplate. There are moderate handling marks throughout. There are cracks at the heel and a large one at the wrist. The LOP measures 13 1/2” from the front of the trigger to the back of the buttplate. The stock rates in about Fair overall condition as an antique.

Type of Finish: Blued, Case Color

Finish Originality: Original

Bore Condition: The smooth bore is gray. There is moderate pitting throughout. In this writer’s opinion the bore rates 6/10 as an Antique.

Overall Condition: This rifle retains about none of its metal finish. The case color frame has faded and gone to patina. There are some light pitting marks throughout. The remaining finish on the barrel has turned to patina. The screw heads show moderate use. The markings are mostly clear. Overall, this rifle rates in about Good condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington Type 2 New Model Rolling Block Shotgun, chambered in 20 Gauge, is a fascinating and rare example of Remington’s early rolling block sporting arms, manufactured between 1867 and 1871. These shotguns were based on the same rugged and reliable rolling block action that made Remington famous in both military and civilian markets. Originally designed for metallic cartridges, the rolling block platform proved versatile enough to be adapted into shotgun configurations, often marketed toward farmers, homesteaders, and frontiersmen needing a dependable single-shot firearm for utility and small game. This early Type 2 variant features a 30.5-inch barrel with a fixed cylinder choke, making it well-suited for short to medium range work with shot loads. The sighting groove on the chamber ring indicates that this receiver was factory assembled as a shotgun, rather than a later conversion. This example retains no original finish, with both the case-colored receiver and blued barrel having aged to a rich brown patina. The tang is clearly marked with an 1866 patent date, aligning with Remington’s early production period. The walnut stock set shows moderate handling wear and notable age, with cracks at the heel and a large one at the wrist, though the wood remains intact overall. The smoothbore barrel shows moderate pitting throughout, but remains serviceable, and the bore rates a 6/10 for an antique. The brass front bead sight remains intact, and the action is mechanically sound, still opening and locking up as designed. Despite its age and wear, the shotgun functions correctly, showcasing the durability and simplicity of the rolling block mechanism.

For collectors of Remington rolling blocks, early American sporting arms, or antique shotguns, this Remington Type 2 20 Gauge Rolling Block offers a rare opportunity to own a true black powder-era survivor. These early shotguns were produced in limited numbers compared to their rifle counterparts and are increasingly scarce on the collector’s market, particularly in any functional condition. Whether appreciated for its mechanical simplicity, early American craftsmanship, or potential for restoration, this Remington remains a remarkable piece of firearms history, capturing the transitional period from muzzleloaders to metallic cartridge arms in post-Civil War America.

Make: Remington

Model: 1867 Navy Cadet

Serial Number: NSNV

Year of Manufacture: 1867-1869 (Frank C. Warner Inspector Mark.) Reworked, 1895-1904

Caliber: .50-45 Black Powder

Action Type: Single shot rolling block with extractor

Markings: The left side of the receiver is marked with a 1868 patent date roll mark. The right side is marked, “P F.C.W”. The buttplate is marked with a New York banner and, “65”. The stock has “KMC” scratched into the right side. The barrel bands are marked, “U”.

Barrel Length: 28”

Sights / Optics: The front sight is a barelycorn blade post integral to a raised base. The rear sight is an adjustable peep hole escalator/ladder sight. The slider is missing.

Stock Configuration & Condition: The stock is a two piece wood set with a full length capped forend, two barrel bands w/ sling loop, sling loop, straight wrist, straight comb, and semi-crescent buttplate. There are scratches, pressure dents, and small chips throughout. There are several cracks at the forend, buttplate and wrist. The LOP measures 13 1/8” from the front of the trigger to the back of the buttplate. The stock rates in about Good overall condition as an antique.

Type of Finish: Blued.

Finish Originality: Original to Arsenal Rework

Bore Condition: The bore is gray and the rifling is mostly strong with small chunks missing. There is moderate erosion in the bore along with moderate pitting concentrated in the upper barrel. In this writer’s opinion the bore rates 7/10 as an Antique.

Most antique firearms have bores that will show erosion. This is not only due to age but also to the use of black powder. When fired, black powder reacts corrosively. NRA Antique Firearm Conditions Standards are quite lenient for bores. In some cases, the NRA standards disregarded the bore’s condition for collector’s firearms.

Overall Condition: This rifle retains about 20% of its metal finish. Most all the bluing has turned to patina with some spots remaining on the receiver. The action is moderately worn. There are small spots of rust throughout. The screw heads show moderate to heavy use. The markings are mostly clear. Overall, this rifle rates in about Good condition for an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: The Remington M1870 .50-45 Navy Cadet Rolling Block Rifle, also referred to as the Model 1867 Cadet Rifle, is a fascinating and rare piece of American military history, especially in this scarce configuration. Built on the pistol-frame variant of the rolling block action, this example was part of a contract issued specifically for the U.S. Navy Cadet program and is one of only 1,000 rifles produced in this configuration, making it exceptionally collectible. While the receiver bears the inspection mark “P F.C.W.” for Frank C. Warner, it’s important to note that Warner only inspected rifles from 1867 to 1869, confirming that the core of this rifle was manufactured during that period and later reassembled or updated for cadet use—likely during the 1890s to 1900s—using remaining Navy parts and refinished stocks. This rifle features a 28-inch barrel and is chambered in .50-45 Government, a black powder cartridge designed specifically for the Navy. The action remains functional and mechanically sound, and the bore, while showing moderate pitting and erosion in the upper section, still retains mostly strong rifling, rating a 7/10 for an antique. The stock shows wear consistent with age and use, including pressure dents, scattered chips, and several cracks, particularly near the buttplate and wrist. The ladder rear sight is missing its slider, but the bayonet-style front blade sight remains intact. The buttplate is marked with a New York Navy rack number, and the barrel bands are marked with "U", indicating government property.

For collectors of U.S. martial arms, Remington rolling blocks, or naval military history, this M1870 Navy Cadet rifle is a seldom-seen and historically significant artifact. Its pistol frame, unique chambering, and limited production of only 1,000 rifles make it a highly desirable addition to any advanced collection. While it shows its age, this rifle is a tangible link to post-Civil War naval training and the evolution of American black powder military firearms, and an excellent example of Remington’s durable and globally adopted rolling block action.

Make: E. Remington & Sons

Model: 1879 No. 3 Special Military Creedmoor

Serial Number: 4314

Year of Manufacture: 1880 to 1888

Caliber: .44-90 Creedmoor Black Powder

Action Type: Single shot hammer fired falling block with extractor & side lever.

Markings: The top of the barrel is marked with an E. Remington & Sons rollmark. The bottom tang is marked with the serial number, “4314”.

Barrel Length: 32”

Sights / Optics: The front sight is a barleycorn post dovetailed into a raised base. The rear sight is a flip-up peep hole escalator sight marked out to 4.

Stock Configuration & Condition: The stock is a two piece walnut set with a capped forend & cleaning rod, barrel band with sling loop, barrel band, straight wrist, straight comb, sling loop, and steel buttplate. There are light handling marks throughout. There are small cracks forming at the contact surfaces. There are no chips or cracks. The LOP measures 13.75” from the front of the trigger to the back of the buttplate. The stock rates in about Excellent overall condition. The stock has been refinished.

Type of Finish: Blued, Case Color.

Finish Originality: Original with spots refinished.

Bore Condition: The bore is bright and the rifling is pronounced. There is light erosion and some concentrated spots of pitting in the bore. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains about 60% of its metal finish. The barrel retains a decent amount of bluing along with light spots of patina thinning. The receiver retains a moderate amount of bright case color intermingled with spots of patina and fading. There are small spots of rust. There is no remaining case color on the receiver. The action has moderate wear. The screw heads are mostly sharp. The markings are clear. Overall, this rifle rates in about Excellent condition as an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington-Hepburn No. 3 Special Military Creedmoor is an outstanding example of a highly respected and precision-oriented black powder single shot rifle from the late 19th century. Produced by E. Remington & Sons between 1880 and 1888, the No. 3 was purpose-built for long-range target shooting and military marksmanship—especially in the Creedmoor tradition, which emphasized extreme accuracy at extended distances. Chambered in .44-90 Creedmoor, this rifle was made to deliver consistent performance using black powder and heavy lead bullets, and it reflects the peak of Remington's engineering during the black powder target shooting era. Its inclusion of a military-style sling setup, long 32" barrel, and adjustable peep sight speaks to its intended role as a precision shooter. This example retains approximately 60% of its metal finish and presents in Excellent condition for an antique rifle of this vintage. The barrel retains a pleasing mix of blued finish with areas of light patina and minor thinning. The receiver still shows areas of bright case color blended with faded patches and honest wear from age and handling. The bore is particularly noteworthy—bright, with well-defined rifling and only light erosion and minor pitting—earning a strong 9/10 rating in this writer’s opinion. The walnut stock has been refinished and remains in Excellent condition with only minor handling marks and small cracks forming at contact surfaces. The mechanical action is smooth and solid, and the original configuration with its peep escalator sight and full-length cleaning rod remains intact.

Rifles like this Special Military Creedmoor were at the forefront of late 19th-century competitive shooting and military testing, and few examples survive in such well-preserved condition. For collectors of Remington single shots, long-range black powder rifles, or 19th-century target arms, this rifle offers remarkable historic value and mechanical integrity. Its crisp bore, complete original configuration, and strong mechanicals make it not just a display piece but also a viable candidate for careful black powder shooting by an experienced marksman. A true relic of precision marksmanship from the golden age of American gunmaking, this No. 3 Creedmoor is a rare and worthy addition to any serious collection.

Make: E. Remington & Sons

Model: 1879 No. 3 Sporting

Serial Number: 3572

Year of Manufacture: 1880 to 1888

Caliber: .40-90 Sharps Straight

Action Type: Single shot hammer fired falling block with extractor & side lever.

Markings: The top of the barrel is marked with an E. Remington & Sons rollmark. The bottom tang is marked with the serial number, “3572”. The right side of the receiver is marked with the Hepburn patent. The bottom of the barrel is marked, “40 3 1/4".

Barrel Length: 30” #4 Profile Octagon

Sights / Optics: The front sight is a knife blade dovetailed to the barrel. The rear sight is an adjustable semi-buckhorn V-notch sight.

Stock Configuration & Condition: The stock is a two piece checkered wood set with a capped forend, checkered Prince of Wales wrist, straight comb, and crescent buttplate. There are pressure dents and scratches throughout. The checkering is worn in spots on the wrist and heavily worn on the forend due to refinishing. There are cracks at the wrist and forend. The LOP measures 13.75” from the front of the trigger to the back of the buttplate. The stock rates in about Excellent overall condition. The stock has been refinished.

Type of Finish: Blued, Case Color

Finish Originality: Original

Bore Condition: The bore is light gray and the rifling is pronounced. There is light erosion and some small concentrated spots of pitting in the bore. In this writer’s opinion the bore rates 8.5/10.

Overall Condition: This rifle retains about 25% of its metal finish. There is heavy patina and light spots of pitting throughout with spots of strong blue on the barrel. There are small spots of remaining case color on the receiver. The action has moderate wear. The screw heads are mostly sharp with some being moderately tooled. The markings are clear. Overall, this rifle rates in about Very Good to Fine condition as an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington-Hepburn No. 3 Sporting rifle, chambered in the powerful and desirable .40-90 Sharps Straight, represents a classic era of precision single-shot firearms intended for long-range and big game applications. Manufactured by E. Remington & Sons between 1880 and 1888, the Hepburn was a serious competitor to Sharps and other high-end sporting rifles of the day. Its strong falling block action, designed by Lewis Hepburn, offered excellent durability and lock-up, making it a favorite among serious marksmen. This example features a 30" #4 profile octagon barrel, ideal for offhand or bench rest target shooting, and is marked “40 3 1/4” confirming its chambering in the long, straight-walled Sharps cartridge designed for accuracy and stopping power. This rifle retains about 25% of its original metal finish and is in Very Good to Fine overall condition for an antique. The barrel shows patches of original blue amid a smooth patina, while the receiver displays remnants of its original case coloring along with scattered light pitting. The bore remains in strong condition, light gray with pronounced rifling and only minor erosion and spotting, rating a solid 8.5/10 in this writer’s opinion. The refinished walnut stock features attractive checkering on the wrist and forend, though the checkering has worn down, especially on the forend. There are some cracks visible at the wrist and forearm, but the wood remains tight and structurally sound. The checkered Prince of Wales wrist and crescent buttplate complete the rifle’s elegant sporting profile.

For collectors and black powder cartridge shooters alike, this Remington-Hepburn No. 3 Sporting rifle is a highly appealing piece. Its desirable .40-90 Sharps Straight chambering, long octagon barrel, and Hepburn’s famously smooth and solid action make it not only collectible but also a potential shooter with handloaded ammunition. These rifles were made in relatively small numbers and are increasingly scarce in complete, correct condition. Whether destined for a collection or brought back to life on the range, this rifle is a striking example of 19th-century precision craftsmanship from one of America’s legendary firearms makers.

Make: E. Remington & Sons

Model: 1879 No. 3 Sporting

Serial Number: 5164

Year of Manufacture: 1880 to 1888

Caliber: .45-70 Govt.

Action Type: Single shot hammer fired falling block with extractor & side lever.

Markings: The top of the barrel is marked with an E. Remington & Sons roll mark. The bottom tang is marked with the serial number, “5164”. The left side of the receiver is marked with the Hepburn patent. The bottom of the barrel is marked, “.45-70".

Barrel Length: 30” #3 Profile Octagon

Sights / Optics: The front sight is a knife blade dovetailed to the barrel. The rear sight is an adjustable semi-buckhorn V-notch sight.

Stock Configuration & Condition: The stock is a two piece checkered wood set with a capped forend, checkered Prince of Wales wrist, straight comb, and crescent buttplate. There are pressure dents and scratches throughout. The checkering is worn in spots on the wrist due to refinishing. The stock is splitting due to age. The LOP measures 13.75” from the front of the trigger to the back of the buttplate. The stock rates in about Very Good overall condition. The stock has been refinished.

Type of Finish: Blued, Case Color

Finish Originality: Original

Bore Condition: The bore is gray and the rifling is pronounced. There is light erosion and some small concentrated spots of pitting in the bore. In this writer’s opinion the bore rates 8/10.

Overall Condition: This rifle retains about 5% of its metal finish. There is heavy patina and light spots of pitting throughout. There are small spots of remaining case color on the receiver. The action has moderate wear. The screw heads are moderately tooled. The markings are clear. Overall, this rifle rates in about Good condition as an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington-Hepburn No. 3 Sporting rifle is a solid example of one of the finest single-shot rifles of the late 19th century, built by E. Remington & Sons between 1880 and 1888. Chambered in .45-70 Government, it was designed to appeal to American sportsmen, target shooters, and hunters who demanded reliability, power, and precision. The Hepburn action, named after designer Lewis Hepburn, is known for its strength and simplicity, making it an excellent platform for high-powered black powder cartridges like the .45-70. With its 30” #3 profile octagon barrel, semi-buckhorn rear sight, and elegant Prince of Wales wrist, this rifle combines performance with classic 19th-century styling. This example retains about 5% of its original metal finish and is in Good condition for an antique. The barrel and receiver show an even, heavy patina with small patches of pitting and scattered remnants of case color on the receiver. The bore is gray with defined rifling, light erosion, and some scattered pitting, rating 8/10 in this writer’s opinion. The refinished walnut stock shows pressure marks, scratches, and areas of wear, with the checkering on the wrist softened from refinishing. A notable age-related split is visible in the stock, though it remains intact and serviceable. The rifle’s mechanics are sound, and its markings, including the “.45-70” caliber stamp and Hepburn patent, are still legible.

For collectors of American sporting arms or shooters of black powder cartridge rifles, this Remington-Hepburn offers a great opportunity to own a historic and capable rifle from the golden age of single-shot design. While cosmetically worn, its bore condition and mechanical integrity make it a viable shooter for those interested in .45-70 handloading and vintage target shooting. As a classic sporting rifle built on one of Remington’s most respected actions, it stands as both a collectible firearm and a functional piece of 19th-century shooting history.

Make: E. Remington & Sons

Model: 1879 No. 3 Sporting

Serial Number: 305

Year of Manufacture: 1880 to 1888

Caliber: .45-70 Government

Action Type: Single shot hammer fired falling block with extractor & side lever.

Markings: The top of the barrel is marked with an E. Remington & Sons rollmark. The bottom tang is marked with the serial number, “305”. The right side of the receiver is marked with the Hepburn patent.

Barrel Length: 28”, 1/2 Octagon Profile

Sights / Optics: The front sight is a two position Beach sight dovetailed to the barrel. The rear sight is an escalator style V-notch sight dovetailed to the barrel. There is a second "Rough & Ready" rear sight dovetailed and screwed to the barrel that is a small flip-up adjustable diopter.

Stock Configuration & Condition: The stock is a two piece wood set with a capped forend, checkered Prince of Wales wrist, straight comb, and crescent buttplate. There are pressure dents and scratches throughout. There are no chips or cracks. The LOP measures 13.75” from the front of the trigger to the back of the buttplate. The stock rates in about Excellent overall condition. The stock has been refinished.

Type of Finish: Blued, Case Color.

Finish Originality: Original

Bore Condition: The bore is light gray and the rifling is pronounced. There is light erosion and some small concentrated spots of pitting in the bore. In this writer’s opinion the bore rates 8.5/10.

Overall Condition: This rifle retains about 10% of its metal finish. There is heavy patina and light spots of pitting throughout. There are small spots of remaining case color on the receiver. The action has moderate wear. The screw heads are mostly sharp. The markings are clear. Overall, this rifle rates in about Very Good condition as an Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This Remington-Hepburn No. 3 Sporting rifle is a refined example of late 19th-century American single-shot craftsmanship, designed for the discerning marksman of its time. Produced between 1880 and 1888 by E. Remington & Sons, the Hepburn action was engineered for strength and precision, making it a favorite for sporting, target shooting, and long-range competitions. Chambered in .45-70 Government, this rifle features a 28" half-octagon barrel and two rear sights, including a vintage "Rough & Ready" adjustable diopter, suggesting it was purpose-built for accuracy-focused shooting. The inclusion of a two-position Beach front sight and Prince of Wales checkered wrist rounds out this rifle’s sporting pedigree. This example has weathered time well, retaining approximately 10% of its original metal finish with a mottled patina and light pitting present across exposed surfaces. There are some traces of case color remaining on the receiver, providing a glimpse of its original brilliance. The bore is light gray with pronounced rifling, showing only light erosion and minor pitting—still quite strong for a black powder rifle of this era, earning an 8.5/10 rating in this writer’s opinion. The refinished stock features a striking Prince of Wales wrist and checkering that remains crisp. It is structurally sound with no cracks or chips, showing only scattered pressure marks consistent with careful use and handling.

As a sporting rifle built during a period of innovation and competition in American firearms design, this Remington-Hepburn No. 3 stands as a testament to precision gunmaking. Its solid mechanics, intact sights, and strong bore make it a viable candidate for black powder cartridge shooting, while its classic lines and low serial number add significant collector appeal. Whether appreciated as a finely balanced target rifle or displayed as a piece of Remington history, this Hepburn is a compelling example from one of the most respected single-shot platforms of the 19th century.

Make: Remington

Model: 81 Woodsmaster

Serial#: 29459

Year of Manufacture: October 1946 (C&R)

Caliber: .35 Remington

Action Type: Semi-Automatic, Fixed Magazine

Markings: The top of the barrel jacket is marked “REMINGTON ARMS CO. INC., ILION, N.Y. MADE IN U.S.A.” along with patent information. The left side of the receiver is marked with the serial number “29459”. The bolt is marked “.35 REM”. The left side of the chamber is marked with the date code “ERR”

Barrel Length: 22”

Sights / Optics: The front sight is a blade set into a raised base dovetailed to the barrel jacket. The rear sight is a semi-buckhorn elevator sight dovetailed to the barrel jacket.

Stock Configuration & Condition / Grip: The stocks are two-piece replacement walnut with a smooth finish, exhibiting newer production quality. The stocks display only minor handling marks. The buttstock is fitted with the original metal buttplate, which shows wear around the heel and toe, typical of normal use. Overall, the stocks are in Fine-Excellent condition.

Type of Finish: Blued

Finish Originality: Professionally Refinished

Bore Condition: The bore is bright with sharp rifling. There is no erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This rifle retains about 95% of its refinished blued finish. There are scattered light handling marks throughout. The screwheads show minor scuffs from use. Markings remain clear and legible. Overall, this rifle is in Very Good–Fine condition as refinished.

Mechanics: The action functions correctly and smoothly. We did not fire this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box Paperwork and Accessories: None included.

Our Assessment: Introduced in 1936, the Remington Model 81 Woodsmaster was the successor to the Model 8, continuing John Browning’s classic semi-automatic rifle design. Chambered in .35 Remington, a favored round for North American big game hunters, the Model 81 earned a reputation for reliability, accuracy, and powerful performance.

This particular example was produced in October 1946 and has undergone professional refinishing along with the addition of new, attractive walnut furniture. The original metal buttplate shows honest wear consistent with age and field use. Retaining approximately 95% of its refreshed finish and featuring a bore rated at 10/10, this rifle remains a superb choice for collectors and hunting enthusiasts alike.

Make: Blue Jacket (Manufactured by Hopkins & Allen)

Model: Blue Jacket No.1

Serial Number: 2838

Year of Manufacture: 1871-1889

Caliber: .22 Short Rimfire

Action Type: Single Action Only Revolver

Markings: The left side of the barrel is marked “BLUE JACKET No.1 NY. PAT. MAR.28.1871”. The bottom left of the grip frame is marked “2838”. There is extensive decorative engraving throughout the revolver.

Barrel Length: 2.25” Round Barrel

Sights / Optics: Front Sight: Blade fixed to the barrel. Rear Sight: A ""U"" groove cut into the top strap, exposed when the hammer is cocked.

Grip Configuration & Condition: Two-piece pearl grips exhibiting a beautiful natural sheen. Both panels show only minor handling marks and remain free of cracks or significant damage. Grips rate in Fine condition as Antique.

Type of Finish: Nickel

Finish Originality: Original. The engraving style and pattern match known examples of Hopkins & Allen Blue Jacket series revolvers.

Bore Condition: The bore is gray with dulled rifling. There is minor erosion throughout. In this writer’s opinion, the bore rates 6/10.

Overall Condition: This revolver retains approximately 90% of its original nickel finish, showing honest age and handling wear consistent with its period. There is some finish loss near the trigger area and cylinder edges. The cylinder shows a defined turn line. Screw heads range from sharp to slightly tool-marked. All markings remain crisp and legible. Overall, this revolver rates in Fine-plus condition for an antique firearm.

Mechanics: The action functions correctly. The hammer cocks securely, the trigger releases smoothly, and the cylinder indexes and locks up properly. We did not fire this revolver. As with all antique firearms, a thorough cleaning and inspection is recommended before firing. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This charming revolver comes elegantly displayed in an ornate red velvet-lined carry case, complete with personalized brass plaque marked ""Anna Rosa."" Included are period accessories suited to a Victorian-era lady’s traveling kit:

A beautiful dagger featuring a pearl handle and ornate silver hilt.

A vintage makeup compact with an abalone/pearl top and a mirror inside, rating in Very Good condition.

A period-correct perfume bottle.

A vintage garter belt.

All accessories and the carry case are in Very Good overall condition, making this a unique and intriguing collector’s ensemble.

Our Assessment: This highly ornate Blue Jacket No.1 .22 Rimfire revolver, produced by Hopkins & Allen between 1871 and 1889, exemplifies Victorian elegance and practical self-defense style. Hopkins & Allen, founded in 1868, became renowned for their revolvers, particularly those associated with Merwin Hulbert. The Blue Jacket No.1 was among their popular personal protection revolvers, known for quality, reliability, and affordability during the post-Civil War era.

This particular revolver, serial number 2838, is beautifully engraved, retaining significant original nickel finish, complemented by attractive pearl grips. Accompanied by unique accessories—a pearl-handled dagger, a vintage makeup compact, perfume bottle, and garter belt—all presented in an antique red velvet carry case personalized ""Anna Rosa,"" this set provides a fascinating glimpse into late-19th-century personal protection and style.

For collectors of Victorian firearms, antique curiosities, or those interested in the societal role of firearms as personal accessories in the 1870s-1880s, this captivating set represents an extraordinary find. Both elegant and historically intriguing, it will be an excellent addition to any distinguished collection.

Make: Belgium (Unmarked Manufacturer)

Model: Folding Trigger Revolver

Serial Number: NVSN

Year of Manufacture: Ca. 1893-1920s

Caliber: .32 Caliber Ceterfire

Action Type: Double Action Only, Folding Trigger, Swing-Out Cylinder

Markings: The right side of the 1.75" octagonal barrel is marked with a “Crown over R” proof mark, indicating Belgian manufacture. Other markings may be present but are obscured due to wear.

Barrel Length: 1.75” Octagonal

Sights / Optics: The front sight is a small fixed blade, and the rear sight is a notch cut into the top strap.

Stock Configuration & Condition: The revolver is fitted with stag antler grips, which are aged but remain structurally sound. They exhibit natural texture and wear, but no significant cracks or damage.

Type of Finish: Nickel

Finish Originality: Original

Bore Condition: The bore is dark with worn rifling and heavy erosion throughout. In this writer’s opinion, the bore rates 4/10.

Overall Condition: This revolver retains about 20% of its metal finish. Most remaining finish is on the hammer, loading gate, safety and ejector assembly. Other surfaces show scattered pitting, erosion, and surface wear. The mechanical components show signs of use, and the folding trigger remains functional. Overall, this revolver is in Fair-plus condition.

Mechanics: The action functions correctly, though wear is evident. The cylinder rotates, and the folding trigger mechanism operates as intended. We did not fire this revolver. As with all antique firearms, a thorough cleaning and inspection are recommended before handling.

Box, Paperwork & Accessories: None

Our Assessment: This Belgian-made folding trigger revolver is a classic example of 19th-century pocket carry firearms, often used for self-defense in civilian and military applications. The Crown over R proof mark indicates Belgian production, though the exact manufacturer is unknown.

Despite its significant wear, loss of finish, and pitting, this revolver remains a historically interesting piece. The stag antler grips provide a distinctive aesthetic, making it a unique collector’s item despite its worn condition.

For collectors of antique European firearms or those interested in restoration projects, this Belgian folding trigger revolver is a representative artifact of 19th-century concealed carry weapons.

""Make: J. Stevens A&T Co.

Model: Tip-Up Single Shot Pistol

Serial Number: 44308

Year of Manufacture: Circa Late 1800s (Antique)

Caliber: .22 LR Rimfire

Action Type: Tip-Up, Single-Shot Pistol

Markings: The left shoulder of the chamber is marked clearly: """"J. Stevens A&T. CO / CHICOPEE FALLS MASS USA.""""

Barrel Length: 3 ½""""

Sights / Optics: The front sight is a small blade fixed to the barrel. The rear sight is a simple notch integral to the frame.

Grip Configuration & Condition: The grips are smooth walnut panels. They exhibit moderate handling wear, scattered marks, and dings typical of age and usage. No significant cracks or structural damage are noted. Overall, grips rate in Good to Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray, and the rifling is worn. There is light erosion present throughout. In this writer’s opinion, the bore rates approximately 5/10.

Overall Condition: This pistol retains about 65% of its original blued finish. There is visible thinning and patina development, particularly at the barrel muzzle, high edges, and grip straps. Moderate handling marks and small areas of oxidation are present throughout. Screw heads exhibit mild tool marks but remain serviceable. The markings are clear and easily readable. Overall, this pistol rates in Good to Very Good antique condition.

Mechanics: The action does not stay cocked and requires mechanical attention. The tip-up barrel mechanism operates smoothly, but internal repairs or adjustments will be necessary for proper function. As with all antique firearms, a thorough inspection and cleaning are recommended before attempting any repairs or use.

Box, Paperwork & Accessories: None.

Our Assessment:
The Stevens Tip-Up pistol was a popular, affordable single-shot handgun produced in Chicopee Falls, Massachusetts, in the late 19th century. Simple and robust, these pistols were favored for informal target shooting, recreational use, and small-game hunting.

This particular example, serial number 44308, shows authentic age-related wear but retains approximately 65% of its original blued finish. While mechanically challenged—unable to remain cocked—the pistol remains an appealing restoration project or display piece due to its historical significance. The bore condition (rated at 5/10) indicates substantial use, aligning with its era of manufacture.

For collectors interested in early American pocket pistols or Stevens firearms history, this tip-up pistol represents a genuine piece of 19th-century firearm heritage. With professional attention to its internal mechanics, this pistol could become fully functional again, or simply enjoyed as a charming antique display item.

This Stevens Tip-Up single-shot pistol, serial number 44308, chambered in .22 Rimfire, retains approximately 65% of its original blue finish. Manufactured by J. Stevens A&T Co. in Chicopee Falls, Massachusetts, during the late 1800s, it features walnut grips in Good to Very Good condition. The bore rates 5/10, gray with worn rifling and light erosion. The pistol’s action does not stay cocked and requires mechanical attention. Classified as Antique, it is eligible for collector purposes without licensing restrictions.""