Michigan Collector Car & Motorcycle Auction

Michigan Collector Car & Motorcycle Auction

Auction closed.
Auction closed.
Michigan Collector Car & Motorcycle Auction

Michigan Collector Car & Motorcycle Auction

Auction closed.
Auction closed.
Internet Premium: 13%
Instant Financing | Low PaymentsSee Special Terms for additional fees

10 Minute Extended Bidding

Share:

Description

Consignments welcome! Contact Liquid Asset 616-719-5917
Ends: Sept 26th @ 11:00am EST.
Preview: Sept 23 - Sept 25, 9:00am - 4:00pm EST, by appointment.
Removal: Sept 28 - Oct 5.
Payment via wire transfer or certified cashier's check only.

Liquid Asset Partners


(616) 719-5917
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 3 of 5

Closed Lots

Birel ART RY30 S9 Race Series Go Kart

Lot # 56      

Model#: RY 30 S9 Vin #: 817086. Purchased new in 2018, and remain unused. Batteries were put in and they were started - they drive great, but need to be broken in. Should...more go about 60mph. The motors are Rotax 125 Junior Max 2 stroke. ENGINE: IAME X30 125cc WATER COOLED T SPEC / ROTAX EVO MAX. Electric Start, Freeline F1 bodywork w/ full factory decal. Freeline Magnesium wheels. Sold with a Bill of Sale. Sample video of one RY30 up & running can be found at the end of the photos. Please note, this video was taken as an example, and may not represent this specific lot.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 60      

Model#: N-35 GT Plate #: 19. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 61      

Model#: N-35 GT Plate #: 30. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART RY30 S9 Race Series Go Kart

Lot # 57      

Model#: RY 30 S9 Vin #: 817081. Purchased new in 2018, and remain unused. Batteries were put in and they were started - they drive great, but need to be broken in. Should...more go about 60mph. The motors are Rotax 125 Junior Max 2 stroke. ENGINE: IAME X30 125cc WATER COOLED T SPEC / ROTAX EVO MAX. Electric Start, Freeline F1 bodywork w/ full factory decal. Freeline Magnesium wheels. Sold with a Bill of Sale. Sample video of one RY30 up & running can be found at the end of the photos. Please note, this video was taken as an example, and may not represent this specific lot.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART RY30 S9 Race Series Go Kart

Lot # 53      

Model#: RY 30 S9 Vin #: 817098. Purchased new in 2018, and remain unused. Batteries were put in and they were started - they drive great, but need to be broken in. Should...more go about 60mph. The motors are Rotax 125 Junior Max 2 stroke. ENGINE: IAME X30 125cc WATER COOLED T SPEC / ROTAX EVO MAX. Electric Start, Freeline F1 bodywork w/ full factory decal. Freeline Magnesium wheels. Sold with a Bill of Sale. Sample video of one RY30 up & running can be found at the end of the photos. Please note, this video was taken as an example, and may not represent this specific lot.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART RY30 S9 Race Series Go Kart

Lot # 55      

Model#: RY 30 S9 Vin #: 817093. Purchased new in 2018, and remain unused. Batteries were put in and they were started - they drive great, but need to be broken in. Should...more go about 60mph. The motors are Rotax 125 Junior Max 2 stroke. ENGINE: IAME X30 125cc WATER COOLED T SPEC / ROTAX EVO MAX. Electric Start, Freeline F1 bodywork w/ full factory decal. Freeline Magnesium wheels. Sold with a Bill of Sale. Sample video of one RY30 up & running can be found at the end of the photos. Please note, this video was taken as an example, and may not represent this specific lot.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 59      

Model#: N-35 GT Plate #: 31. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 62      

Model#: N-35 GT Plate #: 28. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 63      

Model#: N-35 GT Plate #: 26. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 65      

Model#: N-35 GT Plate #: 29. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 67      

Model#: N-35 GT Plate #: 34. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 66      

Model#: N-35 GT Plate #: 20. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 64      

Model#: N-35 GT Plate #: 21. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 68      

Model#: N-35 GT Plate #: 25. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 69      

Model#: N-35 GT Plate #: 24. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 70      

Model#: N-35 GT Plate #: 33. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 71      

Model#: N-35 GT Plate #: 22. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Birel ART N-35 GT Go Kart - Party Kart Series

Lot # 72      

Model#: N-35 GT Plate #: 32. Party Kart Series Karts were in service for 1 year. Goes about 35mph. Features a Honda 27 hp motor. Fitted with a half-cover that can be flip...moreped open, tethered to the chassis for ease of maintenance, while also protecting moving mechanical parts, engine and cabling. The bodywork is made from memory system plastic, designed specifically to withstand and absorb impacts of over 10G. There are four practical handles for lifting the vehicle: two within the front bodywork and two at the rear. All the fenders are attached to the chassis by means of rubber inserts to isolate them from the chassis structure, thus ensuring increased safety on impact. The plastic rubbing strips protect the extremities of the chassis, connecting all the bodywork elements, so as to absorb impacts and limit damage to the chassis, wheels and the kartÕs mechanical parts. The seat is plastic, mounted to a steel frame on runners that allow for a range of movement of 80 mm. The adjuster handle is conveniently situated on the left side of the seat. It is possible, on request, to have a version with a fixed seat. Adjustable manually or by means of a cable from a lever on the right side of the seat, which can be operated by the driver, with a range of movement of 30 mm. A new SDBS (slowing down brake system) which comes into action during braking, reducing the speed of the vehicle by operating on the throttle return cable. Sold with a Bill of Sale.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

2016 Hyosung GT650R

Lot # 73      

2016 Hyosung GT650R VIN: KM4MP6729G1600380. Displacement: 647.0 ccm (39.48 cubic inches), Engine type: V2, four-stroke, Engine details: 90¡ V-twin, Power: 79.0 HP (57.7 ...morekW)) @ 9250 RPM, Torque: 66.9 Nm (6.8 kgf-m or 49.3 ft.lbs) @ 7250 RPM, Compression: 11.5:1, Bore x stroke: 81.5 x 62.0 mm (3.2 x 2.4 inches), Valves per cylinder: 4, Fuel system: Injection, Fuel control: Double Overhead Cams/Twin Cam (DOHC), Ignition: CDI, Lubrication system: Wet sump, Cooling system: Liquid, Gearbox: 6-speed, Transmission type, final drive: Chain, Clutch: Wet, Multiplate, Driveline: Chain 525. Constant mesh

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

2016 Hyosung GT250R

Lot # 74      

2016 Hyosung GT250R VIN: KM4MJ6276G1701087. GT250R features an air/oil cooled V-twin high output DOHC 8 valve engine, race tuned suspension, inverted forks and a gas char...moreged shock absorber that make riding a blast. And when it comes to creature comforts, the GT250R boasts features not usually seen on motorcycles with a bigger price tag, a brightness-adjusted digital display and fuel gauge, three-position adjustable rearsets, reach-adjustable front brake lever, soft seat, dual front disc brakes and the look and feel of a bigger displacement bike. With electronic fuel injection and outstanding fuel economy, the GT250R is the most proficient sporting machine in the 250CC sportbike class. The GT250R is a full size, race tuned bike with looks to match. Fully equipped with V-Twin high output DOHC 8 valve engine, race tuned suspension, inverted forks, gas charged shock absorber,stunning aerodynamics,digital instruments and adjustable riding position. Aluminum exhaust canister and 2 into 1 exhaust for maximum power and torque. Features 41mm inverted forks and front dual disc brakes.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

2016 Hyosung GD250R

Lot # 75      

2016 Hyosung GD250R VIN: KM4EJ4284H1600018. The GD250 is a lightweight, nimble street bike allowing all riders (beginners and experienced) to experience the true essence ...moreof sport riding. The GD250R has a light weight, high performance chassis and single-cylinder engine. ItÕs a great affordable platform to hone your riding skills on. It also features adjustable riding positions to suit various preferences and lifestyles. The GD250R is the best way to experience true sport riding. Lightweight wheels and swingarm contribute to make the GD series agile and loads of fun to ride. Low seat height makes the GD series a great bike for beginners, as well as experienced riders.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to b****s! to YOU!

Placing your bid. please wait...

2016 Hyosung GT650

Lot # 76      

2016 Hyosung GT650 VIN: KM4MP52724G1200236. The GT650 is nearly identical to the GT650, but with minimal bodywork and a less aggressive riding position. The GT650 naked ...moreis all about serious performance AND serious comfort. It all starts with a rigid chassis, adjustable upside down forks and rear shock that gives precise handling and feedback. The 650cc 90-degree DOHC 8-valve fuel-injected V-twin engine delivers peak power and a broad usable power band. A new headlight, black exhaust and European-style upright bars add to the aggressive sport bike styling. The 90 degree V-twin has been taken to the extreme to ensure the ultimate rush. Blistering performance is harnessed in a bridged box frame with all the features advanced technology has to offer. Any enthusiast in the world will be proud to take it to the roads in style. 90¡ v-twin engine delivers high peak power and a broad usuable powerband makes the GT650 a great all around performer. Handlebars provide an upright riding position for comfort and practicality.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Original Antique White Harley Davidson Seat

Lot # 77      

Original Antique White Harley Davidson Seat...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 75.00

You've been outbid  to m****r! to YOU!

Placing your bid. please wait...

Lot of 5 Model Cars

Lot # 78      

Lot of 5 Model Cars...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15.00

You've been outbid  to c****s! to YOU!

Placing your bid. please wait...

Indian 1934 Four Metal Sign

Lot # 79      

Indian 1934 Four Metal Sign...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 30.00

You've been outbid  to S****0! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 3 of 5

1.178.0.1774.cf7307d.24.118