Make: Springfield Armory

Model: Model 1884 Carbine

Serial Number: 414349

Year of Manufacture: 1888 (C&R)

Caliber: .45-70 Government

Action Type: Lever-Action, Breech-Loading, Trapdoor

Markings: The top of the breechblock is marked “U.S. / MODEL / 1884.” The rear of the lockplate is marked with the federal eagle and “U.S. / SPRINGFIELD.” The left side of the barrel, near the breech, is marked with a “V / P / eaglehead” proof. The top of the receiver is marked with serial number “414349.” The buttplate tang is marked “U.S.”

Barrel Length: 22”

Sights / Optics: The front sight is a hooded blade pinned in a base. The rear sight is a Model 1884 Buffington sight adjustable for windage and elevation with a sliding aperture on a graduated ramp and a flip-up ladder. The ladder has elevation markings from 1 to 20. The base has a windage dial.

Stock Configuration & Condition: The stock is a single-piece walnut carbine stock with a straight wrist, single barrel band, sling bar and ring, and carbine-style buttplate with sliding trapdoor with a cleaning kit inside. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The stock shows light scattered compressions, nicks, scuffs, and scratches throughout. There are no visible cracks. The stock rates in about Very Good overall condition.

Magazine Quantity & Condition: N/A

Type of Finish: Blued barrel and case-hardened breechblock and lockplate

Finish Originality: Original

Bore Condition: The bore is mostly bright, the rifling is well defined. There is light visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 40% of its metal finish. The balance of the finish shows thinning throughout the barrel, gray patina on the breechblock, receiver, and lockplate, along with mild oxidation and light surface freckling. There is scattered handling wear and some scattered nicks and scuffs. The screw heads are lightly tooled with serviceable slots. The pins are clean. The markings are legible. Overall, this rifle rates in about Good to Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1884 was the final and most refined version of the Trapdoor Springfield series, which served as the backbone of the U.S. military’s infantry armament following the Civil War until the adoption of the Krag-Jørgensen. This particular example is a true cavalry carbine variant, correctly fitted with the 22” barrel, single barrel band, and saddle ring bar, and it retains its Buffington rear sight, which was a notable upgrade in this model.

This carbine, serial number 414349, was manufactured in 1888 and remains in solid collectible condition with good bore quality, an intact cartouche, and strong mechanical function. With its short barrel and lighter configuration, the Model 1884 Carbine saw widespread use with U.S. cavalry units on the frontier during the Indian Wars period.

Whether you are a collector of Indian Wars-era firearms, a student of U.S. military history, or simply appreciate the elegant simplicity of 19th-century single-shot arms, this Springfield Trapdoor carbine offers both historical charm and practical preservation.

Make: Remington

Model: Model 1875 ""Mexican Contract""

Serial Number: 10727

Year of Manufacture: Circa 1875-1889

Caliber: .45 Colt

Action Type: Single Action Revolver with a Six-Shot Cylinder

Markings: The revolver bears Mexican military acceptance markings, including the “R de M” stamp on the right front of the frame, which signifies Republica de México (Republic of Mexico). Additional marks include an inventory number and the Mexican Liberty Cap emblem on top of the barrel. These markings indicate this revolver was part of a contract order from the Mexican government.

Barrel Length: 7.5” (Rare for a Mexican Contract, as many were cut down during service use)

Sights / Optics: The front sight is a pinched fixed blade, and the rear sight is a groove milled into the top strap.

Grip Configuration & Condition: The grips are smooth walnut, period-correct. They exhibit handling wear, small dings, and minor age-related marks, rating in Very Good condition given the revolver’s military service history.

Cylinder Condition: The cylinder shows expected handling wear, light oxidation, and faint traces of the original finish. The chambers appear clean, and the ""R de M"" stamp is present on the cylinder, as was common with these Mexican contract revolvers.

Type of Finish: Blued (now mostly aged to a White patina)

Finish Originality: Original

Bore Condition: The bore is semi-bright with visible rifling, showing light pitting but remaining shootable. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains a strong historical presence, with much of its original finish aged to a natural patina. The markings remain clear, and the frame, barrel, and cylinder all exhibit period-correct wear expected of a military contract firearm that saw field use. The screw heads are serviceable, and the mechanics remain sound. Overall, this revolver rates in Very Good condition considering its history.

Mechanics: The action functions correctly. The hammer locks back firmly, and the cylinder rotates properly with good lockup. The timing is solid, and the trigger remains crisp. We did not fire this revolver. As with all antique firearms, a thorough inspection by a qualified gunsmith is recommended before use.

Box, Paperwork & Accessories: None.

Our Assessment:
The Remington Model 1875 was the company’s attempt to compete with Colt’s Single Action Army, offering a rugged and reliable single-action revolver chambered in powerful calibers like .45 Colt and .44 Remington. Though less commercially successful than the Colt SAA, the Remington 1875 found favor with several foreign militaries, including Mexico.

This revolver is a Mexican Government Contract Model, as evidenced by the ""R de M"" (Republica de México) stamp, Mexican Liberty Cap, and inventory numbers. These revolvers were issued to the Mexican military and law enforcement, often seeing heavy service in conflicts and border skirmishes. Most Mexican Contract 1875s had their barrels shortened during service, making this original 7.5” barrel example an exceptionally rare find.

For collectors of Old West, military, or Remington firearms, this revolver represents an authentic, historic piece with undeniable provenance. The Mexican Contract 1875s are highly sought after, and examples with original-length barrels and clear markings are exceedingly scarce.

Whether for display, collection, or historical study, this Remington Model 1875 Mexican Contract Revolver is a true piece of 19th-century military history that would enhance any antique firearm collection.

After the United States’ victory in the Spanish-American War, the US gained Guam, Cuba, Puerto Rico, and the Philippines as territories, and the US Army faced a grueling 15 year campaign to quell uprisings in the Philippine Islands from 1899-1913. This Antique 1900s Philippine Insurrection Native Warrior Bolo Sword is in Good Condition, with some rounding to the blade tip, two chips in the upper blade edge, some sharpening and scattered nicking to the blade edge, some cleaning, scratching, pitting, and patina at each side of the blade, moderate patina to the guard, ferrule, and pommel, a deep vertical crack running the length of the inner left side of the handle, and with some overall age wear evident. Most interestingly, it features a once bright 20 3/4” slightly upswept drop point blade, sports a well figured steel “S” guard, with the bottom end curving down nicely to protect the user’s hand, and boasts an elegant greenish brown hardwood handle. It bears a darkened brass ferrule and pommel, exhibits an old inventory tag hand marked “War Bolo / Luzon 1900” still tied around the upper handle, and is a fine example of a rare, original Antique 1900s Philippine Insurrection Native Warrior Bolo Sword. No scabbard included. Lastly, this bolo sword comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This is 2 six pocket bandoleers and 90 factory rounds. Manufactured at Frankford Arsenal in 1906. Marked “60 Ball Cartridges, Cal. .30 / Model of 1898 / Frankford Arsenal” across three of the pockets. Stamped on a fourth pocket is “RIFLE VELOCITY/ At 53 Feet, / 1974 Feet / April 3, 1906”. The cartridges are headstamped “F A  3 06” and are in Very Good condition. The 2 bandoleers are in Good condition with some age soiling, legible printing and missing the carrying straps.

This is an original U.S. Army .30-40 Krag cartridge belt manufactured by Mills & Orndorff during the Spanish-American War period, circa 1898. Made of dark blue woven webbing, the belt features 45 cartridge loops designed to hold .30-40 Krag rifle ammunition. It is fitted with the distinctive brass "C"-clasp buckle and end tabs, which bear the Mills-Orndorff markings along with patent dates faintly visible on the hardware. The blue coloration identifies it as an infantry issue belt. These woven cartridge belts represented a significant improvement over traditional leather gear, offering greater durability and lighter weight. Issued to U.S. troops serving in Cuba, Puerto Rico, and the Philippines during the Spanish-American War, belts like this were paired with the Krag–Jørgensen rifle, the standard U.S. service rifle at the time. This example shows light wear consistent with age but remains in strong, complete condition with no major fraying. A fine and increasingly scarce piece of American military history from the turn of the 20th century.

Step into the pages of American military history with this original U.S. Army Spanish-American War Cartridge Belt, designed to carry the powerful .30-40 Krag cartridges that armed our troops during a pivotal era of expansion and conflict. Featuring a distinctive blue-ticked khaki canvas body, this belt showcases the iconic Mills-style loop design, complete with brass hardware and period-authentic detailing. Whether slung over the shoulder of a soldier in the Philippines or lining a collector’s display today, this piece radiates authenticity and historical significance. It's not just gear—it's a battlefield companion from an era when America was stepping onto the world stage.

For collectors of U.S. militaria, Spanish-American War artifacts like this are getting harder to find in complete, presentable condition. This belt is a stunning example of late 19th-century military engineering—equal parts function and form, built to carry the revolutionary Krag-Jørgensen rifle's rimmed cartridges. Whether you're building a mannequin display, restoring a war-era uniform, or simply looking to own a tangible piece of the past, this cartridge belt tells a powerful story of courage, evolution, and American grit.

This rare U.S. Army M1903 Cartridge Belt is an outstanding relic from the earliest days of the legendary Springfield M1903 rifle! Featuring the highly sought-after rimless eagle snap closures, this belt represents a fascinating transitional period in American military gear. Designed originally for the .30-03 cartridge, this model predates the widespread adoption of .30-06 in 1906, making it a scarce and historically significant piece. Its rugged khaki web construction, sturdy brass hardware, and classic ten-pocket layout reflect the Army's shift toward modernized field equipment in the early 20th century. Whether carried through the tropical jungles of the Philippine Insurrection or issued to troops in the years before World War I, this belt is a direct link to one of the most pivotal eras in U.S. military history.

For collectors of pre-WWI militaria, this example is a must-have! The belt remains in remarkable condition, with strong webbing, functional snaps, and only light wear consistent with age. Its crisp details and rugged authenticity make it a standout display piece, while its historical importance ensures its value in any serious collection. Whether you're a Springfield M1903 enthusiast, a historian fascinated by America’s colonial campaigns, or a military gear collector looking for a true piece of U.S. Army heritage, this belt offers a tangible connection to the soldiers who carried it over a century ago. Don’t miss the opportunity to own a genuine piece of military history!

The US Army was slow to adopt modern rifles after the Civil War, and only in 1892 was the first effective repeating rifle, the Krag-Jorgensen, taken into service. Known simply as "the Krag", it was the mainstay of the US Army in the Spanish-American War and the Philippine Insurrection that followed. Early M-1892 Krags featured a one-piece cleaning rod under the barrel, any surviving examples of which remain quite scarce and desirable today. This US Army Pre-Span Am Early M-1892 .30-40 Krag Rifle One-Piece Cleaning Rod is in Very Good Condition, with a slight overall bend, and with some light overall patina, sticky grayish residue, and age wear evident. Most interestingly, it measures 29 3/8” long, boasts the classic flat top head with eye, and sports the traditional threaded bottom. A fine example of an extremely rare, original US Army Pre-Span Am Early M-1892 .30-40 Krag Rifle One-Piece Cleaning Rod. Lastly, this cleaning rod comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This original M1896 Krag-Jorgensen carbine hand guard was issued to U.S. cavalry troops during the Spanish-American War. Made from American walnut, it features the correct high-hump profile for the 1896 rear sight and was designed for the shorter carbine barrel. Sourced from the respected Canfield Collection, this piece carries strong provenance and authenticity, reflecting its role in early U.S. military history. It shows honest wear from field use but remains solid with no cracks or major damage—ideal for restoration or collection. Original Krag carbine hand guards are increasingly scarce, especially with this level of originality and documentation.

Make: Springfield Armory

Model: Model 1898 Krag

Serial Number: 97408

Year of Manufacture: 1898 (Antique)

Caliber: .30-40 Krag

Action Type: Bolt Action, Fed by Side Loading Gate into Internal Magazine

Barrel Length: 24” (sporterized, shortened from original military length)

Sights / Optics: The front sight is a blade dovetailed into a raised post. The rear sight is a sliding elevator sight.

Stock Configuration & Condition: The stock is in a sporterized 2 piece wood configuration featuring a straight comb, steel buttplate, straight grip and grooved forend. The LOP is 13.5” from the front of the trigger to the back of the buttplate. There are some light scratches and compression marks present. There are no chips or cracks. The stock rates in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This rifle retains about 87% of its current metal finish. There is moderate surface oxidation present on the finish. The markings are clear. The bluing is strong. The screw heads are lightly tool marked with serviceable slots. This rifle rates in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1898 Krag is an iconic rifle in U.S. military history, known for its unique side-loading magazine and exceptionally smooth bolt action. Although originally designed as a military service rifle, many Krags were sold off as surplus and sporterized by civilians during the early to mid-20th century, giving them a second life as hunting rifles.

This particular example, manufactured in 1898 and thus classified as an antique, has undergone a classic sporterization. The barrel has been trimmed to 24", the stock reshaped and refinished, and the handguard removed—enhancing its portability and handling for field use. The original military rear sight remains intact, preserving a bit of its martial heritage.

Collectors of antique firearms, historical shooters, and hunters alike can appreciate this rifle for its smooth action, solid bore, and unique place in U.S. firearms evolution. Its antique status adds further appeal, making it a no-FFL-required addition to any enthusiast's collection.

Make: U.S. Springfield Armory

Model: 1898 Krag-Jorgensen Carbine

Serial Number: 124975

Year of Manufacture: 1898

Caliber: .30-40 Krag

Action Type: Bolt Action, Fed by Side Loading Gate and Internal Magazine

Barrel Length: 22”

Sights / Optics: The front sight is a blade pinned into a raised post. The rear sight is an adjustable ladder sight.

Stock Configuration & Condition: The stock is in a 2 piece wood configuration featuring a straight comb, steel buttplate, straight grip and grooved forend. The LOP is 13.5” from the front of the trigger to the back of the buttplate. There are some light scratches present. There are no chips or cracks present. The stock rates in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This rifle retains about 15% of its original metal finish. The finish has faded to a rich patina. There are some light scratches present. The markings are clear. The screw head are lightly tool marked. This rifle rates in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The U.S. Springfield Model 1898 Krag-Jorgensen represents a pivotal moment in American military firearm design. As the last single-shot loading gate magazine rifle issued in significant numbers to U.S. troops, it bridges the gap between 19th-century and early 20th-century combat arms. This particular example, manufactured in 1898 and classified as an Antique, features the correct 22” barrel, “C”-marked rear sight, and cartouched stock indicative of original carbine configuration—details that bolster its desirability.

The Krag's unique side-loading magazine design and exceptionally smooth bolt action earned high praise during its time, and today, these rifles remain a favorite among collectors and historians alike. The bright bore and strong rifling on this example make it not only collectible but also a viable shooter for those seeking authentic period performance.

This 1898 Krag-Jorgensen carbine, retaining much of its original blued finish and marked by authentic inspector stamps, is an excellent addition to any collection of U.S. military rifles. Whether you're a history enthusiast, seasoned collector, or first-time buyer seeking a classic, this rifle offers both character and historical significance.

The US Marine Corps has always prided itself on being “first to fight”, and so it was that Marine units were sent to France as part of the Army’s 2nd Infantry Division soon after America entered World War 1. The Marines were rushed forward to the Marne to staunch the great German spring offensive in 1918. They passed columns of defeated French troops streaming rearward as the Marines headed towards the front. The dispirited French called out to the Marines- “Le guerre est fini”- (“the war is over, finished”). The Marines called back -”Pas Fini”- (“it’s NOT over”). The Marines stopped the Germans cold in the ensuing Battle of Belleau Wood, and then began to turn the tide at Chateau-Thierry. The Leathernecks’ stand at Belleau Wood is considered one of the crowning feats of arms in the long, storied, and proud history of the US Marine Corps. US Marines in WW1 and the early days of WW2 were issued their own specially designed USMC first aid pouch, designated the P-1912, which featured a rounded front flap (as opposed to the square flap of the Army version) with dual darkened brass "glove" snap closures. This USMC Marine US WW1 WW2 Early Type 1 P-1912 Khaki First Aid Pouch is in Good Condition, with a small spot of surface fraying in the lower middle and lower left front flap, a spot of brownish soiling at the right front flap, a few small spots of brownish soiling at the lower right front body, a small frayed tear under the wire hanger grommet at the upper right back, the traditional “rectangular and X” sewn wire hanger support having been neatly removed from the upper back, some illegible numbers and letters faintly hand marked in black at the lower back, and with some overall fading and age wear evident. Most interestingly, it boasts the original, fully intact "CARR'S. / PAT. ‘13" stamped dual darkened brass "glove" snap closures on the classic P-1912 rounded front flap, sports an intact darkened brass wire hanger through a pair of brass grommets at the upper back, the combination of which distinguishes it as the early “Type 1”, and is correctly unmarked as to its maker or date. It’s complete with an original US Army WW1 Bauer & Black “D” Ring First Aid Packet in Fair Condition, with heavy overall denting and age wear evident. Most interestingly, it's marked "FIRST AID PACKET - U.S. ARMY" in relief at front, along with the date, “CONTRACT AUG. 1918”, and its maker, the famous "BAUER & BLACK", carries a fully intact metal "D" ring opener at the lower right back, and the set is a fine example of a very rare, original USMC Marine US WW1 WW2 Early Type 1 P-1912 Khaki First Aid Pouch. A great relic of the “Old Corps in the Great War”.

Military medicine early in WW1 had changed little in the 50 years since the American Civil War. As the war progressed, advances on the battlefield led to advances in medical treatment, beginning with well trained and equipped medics rendering immediate attention to wounded men. Medics used a wide array of supplies, carried in the specially designed M-1910 medical corpsman belt. This US Army WW1 Mills M-1910 Khaki Medical Corpsman Belt is in Very Good Condition, with a very small frayed hole in the front left pocket flap (near but not under the lift-the-dot), moderate tearing to the top left corner of the back left pocket flap, some brownish and dark soiling to that back left pocket flap, some light scattered verdigris, brownish, and dark spot soiling throughout, and with some light overall age wear evident. Most interestingly, it boasts fully functional darkened brass “lift-the-dot" closures on the 10 pockets throughout, sports a fully intact darkened brass front buckle, and is stamped at the interior left front with the classic “bullet” maker’s logo of the famous “MILLS”, along with the manufacturing date, “DEC. 1917”. It’s marked on the interior sizing ends with that same “bullet” maker's logo, as well as several patent dates, and is a fine example of a rare, original US Army WW1 Mills M-1910 Khaki Medical Corpsman Belt. Lastly, this belt comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

US Army troops of the early 1900s were issued the M-1905 bayonet for use with the Springfield, and it was carried in the specially designed 1st pattern leather scabbard fitted with the Krag style swivel belt hanger then in use. This US Army Pre-WW1 Early No Serial Number RIA M-1905 Springfield Bayonet is in Good Condition, with some light rounding to the blade tip, a chip in the middle top false edge, some sharpening to the blade edge and top false edge, some cleaning, scratching, and pitting at each side of the blade, some cleaning, scratching, and patina to the guard and pommel, some regimental markings having faded away from the reverse ricasso, though they appear to read “K3 / 4”, the handle scales remaining “shy” of the tang, some chipping to the bottom of the right handle scale, some scattered darkening to the handle scales, and with some overall age wear evident. Most interestingly, it features a 15 3/4" bright fullered spearpoint blade that was factory left “in the white”, sports the classic walnut handle scales, and is marked at the ricasso with its maker in serifed lettering, "R.I.A." (the famous Rock Island Arsenal), the traditional "flaming bomb" acceptance stamp of the Ordnance Department, and the scarce early date, "1906.". It's "US" marked with serifs at the reverse ricasso, boasts a fully functional press stud and locking latch, and is such an early piece in fact that it carries no serial number, a trait only found on first year production RIA M-1905 bayonets. It’s complete with the original US Army Pre-WW1 1st Pattern Krag Style Leather Springfield Bayonet Scabbard in Fair Condition, with moderate patina to the metal throat, a few spot dents in the upper front throat, moderate denting and seam tearing to the bottom back end tip of the leather body, moderate drying, scratching, and crazing to the leather body, all of the maker and date marks having faded away from the upper back body, with only the inspector initials “TC” remaining visible, and with moderate overall age wear evident. Most interestingly, it bears a fully intact darkened metal Krag style swivel belt hanger riveted to the upper back of the metal throat, exhibits the traditional brown leather body, and the set is a fine example of a very rare, original US Army Pre-WW1 Early No Serial Number RIA M-1905 Springfield Bayonet. Lastly, this bayonet and scabbard come directly from the personal collection of renowned military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This is an exceptional example of a Pre-World War I U.S. Army M-1910 Canvas Cartridge Belt, featuring the distinctive "eagle snap" closures and designed to carry .30-06 Springfield ammunition in both rimless and rimmed clip configurations. These early M-1910 belts were manufactured during a critical transition period in U.S. military gear development and represent one of the first standardized load-bearing systems adopted across all service branches. The eagle snaps are an iconic hallmark of pre-WWI issue belts, and this particular example has all ten pouches intact, with the original khaki webbing showing honest service wear and patina that adds to its authenticity and character.

Collectors and living history enthusiasts alike will appreciate the historical significance and hard-to-find configuration of this belt. Issued just prior to America's entry into WWI, these belts were used extensively by Doughboys and remained in use into the early years of WWII. This model is specifically designed for use with the M1903 Springfield rifle, and the rimmed/rimless designation reflects the Army’s attempt to accommodate variations in clip design. If you’re building out a U.S. infantryman’s kit, curating a display, or simply want a piece of genuine U.S. military history, this Pre-WWI Eagle Snap M-1910 Cartridge Belt is a rare and exciting find!

This U.S. Army Pre-WW1 Frankford Arsenal .30-03 Springfield Wooden Cartridge Crate is a rare and historically significant ammunition container from the early 20th century. Manufactured at the Frankford Arsenal, a key U.S. military ammunition production facility, this crate was used to store and transport .30-03 Springfield cartridges, the original chambering for the Springfield Model 1903 rifle before the transition to the .30-06 in 1906. With its sturdy wooden construction, the crate measures 18" x 13" x 6", featuring period-correct military stenciling that likely includes caliber markings, lot numbers, and ordnance symbols.

Due to the short production span of the .30-03 cartridge, surviving crates from this era are exceptionally scarce, making this a highly desirable piece for collectors of U.S. military artifacts and early Springfield rifle history. Whether displayed in a historical collection or preserved as a unique relic of America’s early 20th-century military advancements, this crate is a tangible link to the formative years of modern U.S. military ammunition development.

This is an exceptional example of an early U.S. Army M1903 Springfield leather rifle sling, dated 1904, manufactured at Rock Island Arsenal and marked “ROCK ISLAND ARSENAL 1904 T.C.C.” This sling represents the very first year of M1903 production and predates the .30-06 conversion, making it historically tied to the earliest .30-03 rifles issued by the U.S. military. Constructed of thick russet leather, the sling features brass hooks and multiple adjustment holes, correct for the early configuration used on pre-WWI M1903 rifles. The leather remains supple with expected age-related wear, including minor surface cracking and patina to the hardware, but it is structurally sound and very well preserved for its age. This piece comes from the Canfield Collection, known for its rigorously curated and historically significant U.S. military items. Original, unit-marked and dated slings from 1904 are exceedingly rare, especially those tied to Rock Island Arsenal's initial output. This is a top-tier collectible accessory that would complete an early Springfield display or stand alone as an important piece of U.S. ordnance history.

Make: Colt

Model: 1917

Serial Number: 296770

Year of Manufacture: 1920

Caliber: .45 ACP (Auto Rim Capable with moon clips)

Action Type: Double Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked ""COLT D.A. 45"". The underside of the barrel is marked ""UNITED STATES PROPERTY"". The left side of the frame is marked with the Rampant Colt logo. The butt is marked with the serial number ""296770"", ""U.S. ARMY MODEL 1917"", and ""No. 79 630"". The left side of the topstrap is distinctly marked with an eagle’s head over ""S/6"". All markings are crisp and clear.

Barrel Length: 5.5”

Sights / Optics: The revolver features a fixed quarter-round blade front sight (slightly bent) and a frame-notch rear sight.

Stock Configuration & Condition: Smooth walnut grips exhibit honest wear from service use, with handling marks and scattered shallow dents consistent with military issue. No cracks or significant damage is present.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore but there is stubborn fouling throughout. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 90% of its original finish. The finish exhibits typical thinning at high edges, muzzle, cylinder, and grip straps. There are scattered minor surface marks and signs of handling commensurate with its age and military service. Overall, the revolver shows well and maintains substantial original appeal.

Mechanics: The action functions correctly. Cylinder lockup is solid, the trigger pull is smooth in double action and crisp in single action. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None included.

Our Assessment: The Colt Model 1917 revolver was manufactured during World War I to supplement the shortage of the Model 1911 semi-automatic pistols. Chambered for the .45 ACP cartridge using half or full-moon clips, these revolvers were reliable sidearms widely appreciated for their power, accuracy, and robust design. This revolver, bearing crisp U.S. military inspection marks—including a notable eagle’s head over ""S/6"" marking on the left side of the topstrap—offers significant historical interest and collectibility.

This particular example is in very good condition, retaining approximately 90% of its original blue finish, complemented by smooth walnut grips showing honest wear consistent with military use. With a strong, clean bore rating 9/10, it remains an excellent candidate for collectors, military firearm enthusiasts, and shooters alike.

If you’re seeking a classic piece of American military firearms history, this Colt 1917 is a fine representative example deserving a place in your collection.

Make: Remington Arms Co.

Model: 03-A3

Serial Number: 4057042

Year of Manufacture: 1942, Barrel Date: 9-43

Caliber: .30-06 Springfield

Action Type: Bolt action, internal 5 round magazine

Markings: The top of the receiver is marked, “U.S. REMINGTON / MODEL 03-A3 / 4057042”. The mag disconnect is marked, “ON / OFF”. The barrel is marked “RA / 9-43” with an ordnance bomb. The stock is marked “RA” (Remington Arms), with a crossed cannons cartouche and with an inspector cartouche “FJA” in a box. There is a circled P on the front of the grip along with small proofs forward of the bottom metal.

Barrel Length: 24”

Sights / Optics: he front sight is a pinned blade set atop a raised base with a protective hood. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear

Stock Configuration & Condition: The stock is a two piece wood set with a forend cap/bayonet lug & stacking loop, barrel band w/ sling loop, straight wrist, straight comb, sling loop, and steel buttplate with trap door for storage compartment. The stock has been refurbished. There are scattered faint compression lines and scratches throughout. There are some minor chips throughout. There are no cracks. The LOP measures 12 7/8" from the front of the trigger to the rear of the buttplate. The stock rates in about Excellent overall condition. The stock retains its complete cleaning kit.

Type of Finish: Blued/Parkerized.

Finish Originality: Original to arsenal refurbishment.

Bore Condition: The two groove bore is semi bright and the rifling is sharp. There is faint erosion in the bore. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains about 98% of its metal finish. There are light handling marks throughout. The action has minimal wear. The rear action screw is short. The screw heads are sharp. The markings are clear. Overall, this rifle rates in about Excellent condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a leather sling in Good condition. The leather is quite dry. There are no rips or tears.

Our Assessment: This U.S. Remington Model 1903-A3, manufactured in 1942, is a prime example of America’s effort to modernize and streamline infantry rifle production during World War II. As the war intensified, Remington adopted design simplifications like stamped parts and an aperture rear sight to increase production efficiency without sacrificing battlefield reliability. This rifle bears all the correct features of a WWII-era 03-A3, including the “RA” barrel dated 9-43, appropriate inspector cartouches like “FJA,” and the distinctive Remington rollmarks on the receiver. The presence of a correct WWII-era stock with visible cartouches and a functional storage compartment further enhances its historical authenticity. This example is in exceptional condition for a service rifle of its age, retaining approximately 98% of its metal finish. The parkerized components show minimal wear, with only light handling marks visible under close inspection. The bore is semi-bright with sharp rifling and only faint erosion, rating a strong 9/10. The stock retains all critical markings, including the RA and crossed cannons cartouches, a boxed FJA inspector mark, and the correct circled “P” proof on the grip. Structurally, the stock is excellent, with no cracks and only minor chips and compression marks. The rifle includes its original cleaning kit and an issued leather sling, which remains intact though the leather is dry from age.

For collectors of U.S. military arms, the 1903-A3 stands as one of the most practical and accurate bolt-action rifles of the WWII era. This rifle is an excellent example for both display and range use, combining historical authenticity with mechanical soundness. Its strong bore, arsenal-correct features, and overall superb condition make it especially appealing to C&R collectors, reenactors, and marksmen interested in classic U.S. military hardware. Whether appreciated for its wartime service, craftsmanship, or long-range accuracy, this Remington 1903-A3 is a top-tier addition to any collection.

Make: Remington

Model: 1903A3 (03-A3)

Serial Number: 4045082

Year of Manufacture: 1943, Barrel Date: September, 1943

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a pinned blade set atop a raised base. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear. A sight cover is installed on the front sight.

Stock Configuration & Condition: The hardwood stock has a straight grip, metal nose cap with bayonet lug, stacking loop, 2 barrel bands, 2 sling loops, 2 through bolts, and a metal buttplate with hinged door for storage (nothing in the compartment). The left of the stock has a "B.A. J.L." Benicia Arsenal refurbish mark. The wood shows light wear with some nicks, scuffs and scratches. There is some discoloration. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The stock rates in Very Good Plus overall condition.

Type of Finish: Parkerized & Blued

Finish Originality: Most parts' finish appears Original, the safety is parkerized while the rest of the bolt assembly is blued. Some other parts may have been refurbished. Correct R-marked parts.

Bore Condition: The rifle uses a 2-grooved bore. The bore is mostly bright. The rifling is sharp. There is no erosion in the bore, but there is a little stubborn copper fouling. In this writer's opinion, the bore rates 9/10.

Overall Condition: This rifle retains about 95% of its metal finish. The metal shows scattered minor scuffs and small scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The metal markings are clear, the wood markings show some wear. Overall, this rifle rates in Fine condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes in a green canvas zipper case with canvas sling, bandoleer with twelve 5-round clips of ammunition, canvas belt with ammo pouches, med-pouch with Carlisle Model First Aid Packet (sealed) and a U.F.H. M1 bayonet with scabbard.

Our Assessment: When the US Army was looking for a rifle design to replace the 1898 Krag rifle, they looked directly at the Spanish Model 1893 Mauser. This was due to the fact that the performance of the Model 1893 Mauser was far superior than that of the 1898 Krag during the Spanish-American War. The Model 1903 is basically a redesigned Mauser clone. A U.S. Patent Court eventually found that the U.S. Army had violated Mauser’s patents and required the U.S. Army to pay the German Mauser manufacturers patent royalties. Payments were stopped once WWI started. The 1903 has a strong reliable action that served the Army for over thirty years in two world wars. The 1903A3 is an improved version of the 1903 rifle that was introduced in 1942. The most significant change was the switch to a receiver bridge-mounted rear aperture sight.

This Remington Model 1903-A3 was made back in 1943. The rifle looks great for being more than 80 years old. It has nice Remington markings on the receiver and barrel as well as small “R” stamps on many of the metal parts. This Remington Model 1903-A3 has a strong bright bore so it should do well at the range. It will add to your WWII or Military collection. Please see our photos and good luck!

Make: Remington

Model: 1903A3 (03-A3)

Serial Number: 3819321

Year of Manufacture: 1943, Barrel date - May 1943

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Markings: The top of the receiver is marked “U.S. / REMINGTON / MODEL 03-A3 / 3819321”. The safety is marked “SAFE READY” and the magazine cutoff is marked “ON OFF”. The underside of the bolt handle, the bolt sleeve, safety lever, magazine selector, nosecap, stacking loop, and sling loop are marked “R” for Remington. There is no marking on the nose of the stock. The left side of the stock, above the trigger, is marked “RA” (Remington Arms), with a “crossed cannons” cartouche and with an inspector cartouche “FJA in a box”. The bottom of the grip is marked with a “circled P” proof. The belly of the stock is marked with inspection stamps.

Barrel Length: 24""

Sights / Optics: The front sight is a pinned blade set atop a raised base. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear.

Stock Configuration & Condition: The hardwood stock has a straight grip, metal nose cap with bayonet lug, stacking loop, 2 barrel bands, 2 sling loops, 2 through bolts, and a metal buttplate with hinged door for storage (nothing in the compartment). The wood shows light scratches and compression marks. The most prominent marks are on the belly of the stock. Some of the marks have damaged small portions of the surface wood. The stock has been oiled. The LOP measures 13"" from the front of the trigger’s installed wide, serrated shoe to the back of the buttplate. The stock rates in about Very Good Plus overall condition as refinished.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The rifle uses a 2 grooved bore. The bore is bright. The rifleing is sharp. There is no erosion. The bore shows an M.E. of 1.5.

Overall Condition: This rifle retains about 95% of its metal finish. The metal shows scattered scuffs, scrapes and scratches. The most prominent marks light corrosion ear the muzzle. The screw heads are intact. The markings on the metal are deep. The markings on the wood are strong. Overall, this rifle rates in about Very Good Plus condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: The trigger shoe, leather sling and canvas muzzle cover accompany the rifle.

Our Assessment: When the US Army was looking for a rifle design to replace the 1898 Krag rifle, they looked directly at the Spanish Model 1893 Mauser. This was due to the fact that the performance of the Model 1893 Mauser was far superior than that of the 1898 Krag during the Spanish-American War. The Model 1903 is basically a redesigned Mauser clone. A U.S. Patent Court eventually found that the U.S. Army had violated Mauser’s patents and required the U.S. Army to pay the German Mauser manufacturers patent royalties. Payments were stopped once WWI started. The 1903 has a strong reliable action that served the Army for over thirty years in two world wars. The 1903A3 is an improved version of the 1903 rifle that was introduced in 1942. The most significant change was the switch to a receiver bridge-mounted rear aperture sight.

This Remington Model 1903-A3 was made back in 1943. The rifle looks great for being more than 80 years old. It has nice Remington markings on the receiver and barrel as well as small “R” stamps on many of the metal parts. There are also markings on the stock which add to the rifle’s history. This Remington Model 1903-A3 has a strong bright bore so it will do well at the range. It will add to any WWII or Military collection.

This U.S. Army WWII M1903 Springfield Rifle Repair Kit is an original military-issued collection of essential spare parts used for the maintenance and repair of the M1903 service rifle. These kits were critical for armorers and field personnel to keep rifles operational during the war, ensuring that worn or damaged components could be replaced quickly in combat or training environments. The included parts list features key components such as extractors, firing pins, safety locks, rear sight elements, and various springs and screws, all vital for the function of the rifle.

Still in its original packing, this repair kit is a significant historical artifact from World War II, offering collectors and military historians an authentic glimpse into the logistical efforts behind weapon maintenance. Whether preserved as a collector’s piece or used to restore a period-correct rifle, this kit represents an important piece of U.S. military history. The presence of original military stock numbers and nomenclature further adds to its authenticity and desirability among enthusiasts.

Get ready to step into history with this incredible US Army WWII M-1903 Springfield / M-1 Garand Rifle Cartridge Belt, manufactured by the legendary Boyt in 1944! This is the iconic OD green M-1923 belt, purpose-built to carry en bloc clips for the M1 Garand or stripper clips for the M1903 Springfield. With ten perfectly riveted pouches, brass grommets for attaching gear, and clear "BOYT -44-" markings, this belt screams authenticity. Whether you're a passionate reenactor or a WWII collector, this original 1944-dated piece is a must-have for your gear setup or display.

The condition is superb for its age, showing honest wear and a beautiful patina that tells its own story from the Greatest Generation. The canvas is sturdy, the stitching tight, and the U.S. stencil across the front proudly stands out. Whether you're outfitting a full field gear mannequin, rounding out a D-Day collection, or just adding one more gem to your WWII shelf, this belt is the real deal—authentic, rugged, and rich with American military history.

This rare original US Army WWI-era Remington-UMC box of 40 .30 Auto Pedersen Device cartridges is an exceptional piece of early 20th-century military innovation! These unique rounds were developed specifically for the secretive and ambitious Pedersen Device—an attachment that could instantly convert a standard M1903 Springfield rifle into a semi-automatic carbine. Packed neatly in the original military-style box, this lot offers a glimpse into one of the most fascinating "what-if" chapters of American arms development. With the Pedersen Device never widely deployed before the end of the war, surviving ammunition like this is extremely scarce and highly sought after by collectors.

Whether you're a military historian, a World War I collector, or a fan of rare experimental ammo, this box is a showstopper. The label is clear, the packaging authentic, and the historical significance undeniable. It’s more than just ammo—it’s a tangible link to a bold wartime innovation that nearly changed the course of infantry combat. This is the kind of item that doesn’t come around often—don't miss your shot at owning a rare relic from the dawn of American semi-auto warfare!

Manufactured in 1970, this is a complete can of 7.62x51mm NATO Match ammunition made by the Lake City Army Ammunition Plant operated by Remington (now operated by Winchester). All twenty-three boxes are from the lot number 20-4 as marked on the outside of the can. While the exterior of the can shows oxidation and wear, the boxes appear to be in pretty good shape. As they are sealed, we have not opened them to inspect the cartridges.