Make: Eddystone

Model: U.S. Model of 1917 (Sporterized)

Serial Number: 774858

Year of Manufacture: Circa 1917. C&R Eligible

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Markings: The receiver is marked “U.S. / MODEL OF 1917 / EDDYSTONE / 774858”. The barrel near the receiver ring is marked with the “E” for Eddystone and a flaming bomb ordnance mark. Additional markings are partially obscured by the scope mount.

Barrel Length: 26”

Sights / Optics: This rifle is fitted with a Simmons scope marked “3-9x23” and “Deerfield”. The scope has a duplex reticle. The glass is clear with minor dust and signs of age. The scope is mounted on a base. The front sight The rear iron sight have been removed during sporterization. The scope rates in about Good condition.

Stock Configuration & Condition: The stock is a custom sporter stock with semi-pistol grip, raised comb with cheek piece, and a rubber buttpad. It features checkered grip and forend panels, a white spacer with decorative grip cap, and a black plastic buttplate with white spacer. The right side of the buttstock features a diamond-shaped inlay with a white center. The LOP measures 13 7/8" from the front of the trigger to the back of the buttplate. The stock shows multiple dings, nicks, and scratches from handling and age. Checkering is moderately worn but visible. The stock rates in about Good overall condition.

Magazine Quantity & Condition: The rifle retains its internal magazine system with a floorplate.

Type of Finish: Blued

Finish Originality: Not original. This rifle has been refinished and sporterized.

Bore Condition: The bore is bright, the rifling is sharp. There is very light visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 55% of its current metal finish. The balance of the finish shows moderate operational wear, thinning throughout, oxidation, and scattered freckling. The receiver shows signs of past rust that has been cleaned. The screw heads are serviceable but show mild tooling. The pins are unmarred. The markings are sharp and legible. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: Included is the mounted Bushnell scope. No box or additional accessories are included.

Our Assessment: This rifle began its life as a U.S. Model of 1917 bolt action rifle, one of the most robust and powerful rifles issued to American troops during World War I. Manufactured by Eddystone, it was chambered in the powerful .30-06 Springfield cartridge and known for its strong action and reliability under adverse conditions.

This particular example has been sporterized, a common practice in the mid-20th century when surplus military rifles were converted into hunting rifles. The original full-length military stock has been replaced with a custom Monte Carlo sporter stock, and a Bushnell scope has been mounted for hunting use. While collectors may prefer unaltered rifles, sporterized variants like this still retain the strength of the 1917 action, ideal for big game hunting.

For hunters and enthusiasts looking for a dependable and historically rich rifle for the field, this Eddystone sporter offers a unique combination of heritage, utility, and affordability. The bright bore and solid mechanics make it ready for use, while the craftsmanship of the sporterization reflects a bygone era of hand-finished hunting rifles.

Make: Winchester

Model: 1897 Trench Gun

Serial Number: 669782

Year of Manufacture: Ca. 1918

Gauge: 12 Gauge, 2 3/4"" Shells

Action Type: Pump / Slide Action, Tube Magazine Fed Shotgun

Barrel Length: 20"" Nominal, 20 1/4"" Measured

Choke: Fixed Cylinder Bore

Sights / Optics: There is a brass bead mounted to the bayonet lug assembly. The barrel is not drilled for a bead. The top of the receiver has a sighting plane.

Stock Configuration & Condition: The stocks are two-piece walnut with a grooved slide handle, pistol grip, straight comb, inlaid sling plate in the belly and checkered black hard rubber Winchester buttplate. The bottom of the grip is stamped ""F"". There are some scattered nicks and scratches. There is a more notable ding at the left-rear of the forend and a loss at the heel. The LOP measures 13 7/8"" from the front of the trigger to the back of the buttplate. The plate has minor wear with well defined checkering and lettering. Overall, the stocks are in about Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright. There is no erosion in the bore, but there is stubborn dried grease. In this writer's opinion, the bore rates 9+ out of 10.

Overall Condition: This shotgun retains about 90% of its metal finish. The finish is generally strong with thinning at some edges. The most notable finish wear is on the trigger guard and receiver. The worn areas show discoloration from oxidation. There are some scattered light nicks and small scratches. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this shotgun is in Very Good-plus condition.

Mechanics: The actions functions correctly. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: After observing the Great War for the first three years, it became clear to the U.S. that serious close-range firepower was needed in trench warfare. The Model 1897 Trench Gun was an evolution of this idea. The pre-existing Winchester Model 1897 was modified by adding a perforated steel heat shield over the barrel which protected the hand of the user from the barrel when it became over-heated, and an adapter with bayonet lug for affixing an M1917 bayonet. They were so effective and brutal in combat that the German high command once announced they would execute any US soldier captured with one in his possession. The 1897 Trench Gun was also durable enough that it would go on to see service in the second World War all the way through to the Gulf War.

This example was produced Ca. 1918 and has correct features for a Trench Gun. Unlike many WWI 1897 Trench Guns, there are martial markings on this shotgun, the right side of the receiver has “U S” hand-stamped over a flaming bomb Ordnance mark. There has been no end of speculation among collectors as to the reason for unmarked trench guns, but it appears that there were many which were delivered too late to actually make it to the front lines. The end of WWI came as a shock to nearly everyone. At the time, most of the Allied powers believed that the war would continue for at least a few more years. The German offensive Operation Michael had just been halted and the Second Battle of the Marne, the first successful Allied offensive, was just starting. No one would guess that the war would end less than 6 months later. Consequently, there were likely many Trench Guns which had been produced and/or delivered which were never issued and simply remained in the government’s inventory. This example, however, has markings consistent with a gun delivered early enough to be inspected and issued.

The gun is in Very Good-plus condition, showing very little wear considering its age and service. This is a well preserved military 97 that will be tons of fun to shoot at the range and will be a great addition to any collection. Please see our photos and good luck!

Make: Winchester

Model: 12 Trench Gun

Serial Number: 1032895

Year of Manufacture: Ca. 1945, 43 barrel date.

Gauge: 12 Gauge, 2 3/4" Shells

Action Type: Pump / Slide Action, Tube Magazine Fed Takedown Shotgun

Barrel Length: 20" Nominal, 20 3/4" Measured

Choke: Fixed Cylinder Bore

Sights / Optics: There is a silver-colored bead mounted to the bayonet lug assembly. The barrel is not drilled for a bead. The top of the receiver has a sighting plane, serrated for glare reduction.

Stock Configuration & Condition: The stocks are two-piece walnut with a grooved slide handle, pistol grip, straight comb, inlaid sling swivel plate in the belly, and checkered black hard rubber Winchester buttplate. The left of the buttstock has a "G.H.D." in box cartouche over an Ordnance wheel. The left of the heel has what appears to be a spot of white-out with "52" hand-written. The stocks have minor wear with some light nicks, scuffs and scratches. The LOP measures 14" from the front of the trigger to the back of the buttplate. The plate has minor wear with well defined checkering and lettering. Overall, the stocks are in Fine condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is mostly bright. There is no erosion in the bore, but there is some stubborn dried grease. In this writer's opinion, the bore rates 9+ out of 10.

Overall Condition: This shotgun retains about 90% of its metal finish. The finish is generally strong with thinning at some edges. There are some scattered small marks and light operational wear. There are tool marks at the front of the magazine tube. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this shotgun is in Very Good-plus condition.

Mechanics: The actions functions correctly. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: A leather military-style sling is installed.

Our Assessment: The Model 1912 (shortened to Model 12 in 1919) was the next step from the Winchester Model 1897 hammer-fired shotgun, which in turn had evolved from the earlier Winchester Model 1893 shotgun. The Model 12 was designed by Winchester engineer T.C. Johnson, and was based in part on the M1893/97 design by John M. Browning, in that it used a sliding forearm or "pump action" to cycle the mechanism. Along with the 1897, the Model 12 was used in both World Wars by U.S. Armed Forces in both Trench and Riot configurations.

This is a WWII vintage Trench Gun which was made around 1945. The great majority of Trench Guns were finished by Winchester with commercial-grade polish and bluing and most of these were later parkerized when they were refurbished. Much less common are factory parkerized Trench Guns. Bruce Canfield lays out four points of consideration in his book "Complete Guide to United States Military Combat Shotguns". Serial numbered above 1,030,000? Check. Receiver with a rough, unpolished texture? Check. Some blued parts? Trigger, screws, safety, check. Parkerizing grayish with a green tint from cosmoline or oil? Also check. This late-war Trench Gun checks all the boxes and will make a wonderful addition to even advanced collections. Please see our pictures and good luck!

Step back in time with this exceptional US Army WWII-era box of 24 Winchester Repeating Arms 12 GA brass 00 buckshot shotgun shells—an authentic piece of American military history! These shells, housed in their original government-marked box, were manufactured by Winchester specifically for wartime use, making them a rare and highly desirable collectible for military enthusiasts, ammo historians, and WWII collectors alike. The all-brass construction is an iconic throwback to the era before plastic hulls, and the 00 buckshot load delivers that unmistakable battlefield punch that was trusted by troops in the trenches, jungles, and everything in between.

Whether you're building a vintage military display, curating a WWII arms and ammunition collection, or simply love the nostalgia and rugged beauty of early American ordinance, this complete and original box stands tall as a centerpiece item. The Winchester name, combined with US Army provenance and wartime production, makes this set a standout artifact with strong collector appeal. It’s not just ammo—it’s a tangible link to the soldiers who carried these into combat during one of the most defining chapters in world history.

This offering is a remarkable piece of U.S. military history, originating from the acclaimed Canfield Collection and featuring 8 full boxes, 7 in their original waxed paper packaging, (25 shells each) of Western Cartridge Company 12-gauge 00 buckshot, all neatly stored in the original WWII-era wooden military ammunition crate. These shells are the iconic brass-headed, paper-hulled type commonly issued to U.S. forces during the Second World War, with clear military contract markings and Western branding. The crate itself, measuring approximately 15" x 9" x 9", retains its original period stenciling, handles, and hardware, presenting a rich, authentic patina. This ammunition was typically issued to military police, naval security, and combat troops for close-quarters defense, particularly in the Pacific theater. The 00 buckshot load was prized for its stopping power and remains one of the most recognizable combat shotgun loads in history. Whether you’re a collector of U.S. military memorabilia, vintage ammunition, or are building a wartime display, this set offers both historical value and excellent presentation.

Step into the history of World War II with this incredible U.S. Army box of ten M19 12 GA. brass 00 buckshot shotgun shells, manufactured by the legendary Remington Arms. These shells are housed in their original wartime box, complete with clear military labeling and period-correct markings. The brass construction is a standout feature, designed for rugged military use, and the 00 buckshot load was favored for its devastating close-range stopping power. Whether you're a military collector, a shotgun enthusiast, or simply a fan of rare wartime artifacts, this is an authentic piece of WWII firepower that speaks volumes.

This set offers more than just ammunition—it’s a snapshot of American ingenuity and battlefield necessity. Issued to U.S. troops for trench-clearing and defensive roles, the M19 buckshot round played a crucial role in some of the grittiest, close-quarters combat of the war. Remington's wartime production quality is on full display here, and the condition of both the shells and the box makes this a truly remarkable find. Add this to your collection and own a tangible piece of the greatest generation's fight for freedom.

From the esteemed Canfield Collection, this offering includes 20 full boxes of Peters 12 Gauge 00 Buckshot, each containing 25 shells, totaling 500 rounds, all neatly housed in an original Peters Cartridge Company wooden shipping crate measuring approximately 15" x 9" x 9". These shells were produced by Peters Cartridge Company, one of the major ammunition manufacturers supplying commercial and government markets during the WWII era. Though this crate is a commercial Peters crate, the shells themselves are of the type issued for military use during the war, particularly for trench and riot shotguns like the Winchester Model 1897 and Model 1912. Each box remains in well-preserved condition, with crisp labeling and visible markings consistent with 1940s production. The wooden crate is a collectible in its own right, bearing bold Peters branding on the side panels, and showing honest wear and age-related patina. Its compact size and authentic vintage construction make it an excellent display piece.

US Army troops and US Marines in Vietnam were issued the classic 18" blade M-1942 machete for clearing brush and fields of fire, and if necessary, use as a last resort weapon. This US Army Vietnam Ontario M-1942 Jungle Machete is in Excellent Condition, with some light scratching, scabbard wear, and patina at each side of the blade, some patina to the left side of the metal handle scale rivets, and with some light scattered age wear evident. Most interestingly, it features a 17 7/8" blade that retains approximately 90% of the crisp, original parkerized finish, sports the classic black plastic handle scales with the protruding bottom, and is "U.S" stamped in inverted fashion at the ricasso, along with its maker, the famous "ONTARIO KNIFE CO.", marked vertically along the lower left side of the blade. It’s complete with an original US Army WW2 M-1942 Machete OD Canvas Scabbard in Good Condition, with some scattered fading, brownish soiling, and dark spot soiling at front and back, some fading to the markings at the upper back, remaining a tight fit for the machete, with the last quarter length having to be shimmied in, and still remaining about 3/8” too short to fully accept the blade, and with some overall age wear evident. Most interestingly, it bears the classic darkened brass reinforced throat, carries a fully intact darkened brass wire hanger at the upper back, and is faintly “U.S.” marked at the upper back, along with its maker and date, “AVERY 1943”. The set is a fine example of a rare, original US Army Vietnam Ontario M-1942 Jungle Machete. Lastly, this machete and scabbard come directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this set.

The US Army introduced the M-3 trench knife in 1943 for troopers carrying arms not configured to accept a bayonet. The wide use of Thompsons and Carbines by paratroopers meant the M-3 was issued in large numbers to those elite airborne troops. Often worn strapped to the calf, the M-3 trench knife quickly became part of the paratrooper mystique, and a symbol of those "devils in baggy pants". This US Army WW2 D-Day Paratrooper Airborne Camillus Blade Dated M-3 Trench Knife is in Excellent Condition, with a bit of sharpening to the blade edge, a bit of scratching at each side of the blade, some loosening to the guard, a few small nicks in the upper right side of the handle, and with some light scattered age wear evident. Most interestingly, it features a 6 11/16" spearpoint blade with the classic top false edge that retains approximately 95% of the crisp, original parkerized finish, sports a beautiful stacked leather washer "tootsie roll" handle, and is marked "US M3" at the lower right side of the blade, along with its maker, the famous "CAMILLUS", and the date, “1943”. Blade dated M-3 trench knives, especially in this condition, are very rare and difficult to acquire today. It boasts the familiar "thumb rest" bend in the top end of the steel guard, carries the traditional "flaming bomb" acceptance stamp of the Ordnance Department at the bottom of the two pin steel pommel, and is complete with the original US Army WW2 D-Day Paratrooper Airborne Unmarked M-6 Brown Leather Scabbard in Excellent Condition, remaining a bit too small to fully accept the blade, resulting in a small gap between the throat and guard, and with some light crazing at each side of the handle retention strap, a fingernail shaped dark line in the lower left front belt hanger, and with some light scattered age wear evident. Most interestingly, it's unmarked as to its maker or date, boasts the classic 8 metal "staples" at the front throat, and sports darkened metal rivets and white cotton stitching down the sides, a metal reinforcement plate at the front and back end tip, a darkened brass tie down grommet at bottom, and a fully functional darkened metal "glove" snap closure leather handle retention strap at the middle front belt hanger. It’s crafted of gorgeous brown leather, exhibits a fully intact darkened metal wire hanger in a riveted and sewn channel at the top reverse, and the set is a beautiful example of a very rare, original US Army WW2 D-Day Paratrooper Airborne Camillus Blade Dated M-3 Trench Knife.

The US military saw the success of German paratroopers in 1940, and quickly set about creating its own elite airborne units. US paratroopers jumped on Sicily in Operation Husky in 1943, dropped into Normandy during the D-Day invasion in 1944, fought through the hedgerows of France until the breakout at St. Lo, jumped on Holland in the ill-fated “bridge too far” attempt of Operation Market Garden, held the line at Bastogne during the “Battle of the Bulge”, and “jumped over the Rhine” in Operation Varsity in March 1945. Their exploits were legendary. US paratroopers of WW2 were all volunteers, pushed to top levels of physical fitness, mental toughness, and esprit de corps by rigorous jump training, and they played a pivotal role in the Allied victory. Those "devils in baggy pants" were issued the classic M-2 “press button” jump knife to be carried in the small zippered pocket at the upper left front placket of the jump jacket. The knife was designed to allow a paratrooper to cut tangled shroud lines if his parachute became ensnared in a tree, or if he dropped into a body of water, the latter a terrifying scenario made all the more possible on D-Day once Rommel ordered the fields of Normandy flooded in anticipation of an Allied airborne landing. The earliest M-2 jump knives were made by Schrade Cut Co. of Walden, New York, and featured genuine jigged bone handle scales with no hanging bale. This US Army WW2 D-Day Paratrooper Airborne Schrade Cut Co. Early M-2 Press Button Jump Knife is in Good Condition, with some light side to side loosening to the blade when in the open and locked position, some light rounding to the blade tip, some sharpening to the blade edge, some light chipping to the upper blade edge, some cleaning, scratching, and pitting at each side of the blade, some cleaning, scratching, and pitting to the spine of the handle, a small chip in the lower right side of the left handle scale, missing the pin from the top left handle scale, and with some overall age wear evident. Most interestingly, it features a 3 3/4” bright clip point bowie blade with a fully functional press button opening and closing mechanism, sports elegant genuine jigged bone handle scales each secured by 5 metal pins (the left scale only has 4 remaining as mentioned), and is stamped at the ricasso with its maker, the famous “SCHRADE / CUT. CO. / WALDEN, N.Y.”, along with 4 lines of patent information marked at the reverse ricasso. It boasts a fully functional slide lock mechanism (when slid up the press button is locked, when slid down the press button is unlocked), exhibits no hanging bale, distinguishing it as a scarce early piece, and is a fine example of a very rare, original US Army WW2 D-Day Paratrooper Airborne Schrade Cut Co. Early M-2 Press Button Jump Knife.

This listing offers a Vintage Distinguished Service Cross (DSC) Medal, complete with its original bar pin back and housed in a period display case. The Distinguished Service Cross is the second-highest military decoration awarded to members of the United States Army, presented for extraordinary heroism in combat. Acts recognized by this The ribbon remains bright and vibrant, with its traditional red, white, and blue vertical stripes well-preserved. There is only minimal fading, and no fraying is visible along the edges. The medal has not been polished, retaining its original bronze patina and crisp detail throughout. The bar pin attachment is tight and original to the medal, contributing to its overall integrity and authenticity.

This lot includes two original U.S. Silver Star medals, each with its matching bar pin and housed in its own vintage display case. The Silver Star is the third-highest combat decoration awarded by the U.S. Armed Forces for gallantry in action against an enemy. These medals feature the classic gilt-bronze five-pointed star with a silver center star, suspended from red, white, and blue ribbon drapes. Both medals retain their original finish, show light age patina, and include functional bar-style suspension pins.

The vintage military display cases are leatherette with gold trim, lined in satin and velvet. The interiors are clean and fitted, while the exteriors show light scuffing and wear, consistent with age. Hinges and clasps remain functional.

Although unnamed, these medals appear to date from the WWII–Vietnam War period based on their design and construction. They are complete, authentic, and well-preserved these are ideal for collectors, historians, or those honoring family service.

This lot offers a strong opportunity to own two of the most respected awards in U.S. military history. These Silver Stars represent courage, sacrifice, and distinguished service in combat.

Make: Springfield Armory

Model: M1D Garand, CMP Service Grade

Serial Number: 2146922

Year of Manufacture: November, 1943, Barrel Date August, 1952

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / SPRINGFIELD / ARMORY / 2146922”

Trigger Group- “D28290-12-SA”

Safety- "C46015-9SA"

Hammer- “C46008-5 SA”

Receiver Leg- “B 1 6", diamond, "D28291 30"

Op Rod- “D35382-W.R.A.”

Barrel- "A", "T", "P" (twice), "S-A-8-52"

Bolt- “6528287 - SA / US1”

Stock- grip with a “P”, left with "RA" and "S.A" in box cartouches.

Rear Sight- "DRC"

Cheek Pad- "MRT / 1 52"

Barrel Length: 24”, 26 1/2" to the front of the installed Hart Mfg. Co. Hider Flash M2.

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings. An M84 scope is installed on the barrel block.

Stock Configuration & Condition: The wood stock has a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (nothing in compartment). The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate shows scattered light wear. There are a few scattered compressions, but no notable damage. There are no chips or cracks. Overall the stocks are in about Fine condition as refurbished.

Type of Finish: Parkerized

Finish Originality: Arsenal Refurbished

Bore Condition: The bore is mostly bright with sharp rifling. There is no erosion in the bore, but there is a little copper fouling. Our gauges show an ME of about 1 and a TE of about 1.5. In this writer's opinion the bore rates 9/10.

Overall Condition: The rifle retains 96% of its metal finish. The finish is generally strong. There is handling wear on the charging handle. The finish is thinning at some edges. There are a few other scattered minor marks. The action shows light operational wear. There is some minor erosion under the finish, primarily on the receiver. The markings are clear. Overall, this rifle is in about Fine condition as Arsenal Refurbished.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included are the installed green canvas sling, M84 scope, Hider Flash M2 and 7-16-97 dated CMP DD Form 1438-1 for the transfer of this rifle as an M1D Service Grade.

Our Assessment: This is a nice example of a genuine M1D Garand sold as a Service Grade by the CMP in 1997. The rifle is built on a 1943 Springfield receiver with mostly Springfield parts. Based on the 1952 barrel and cheekpad dates, it is likely that the rifle was refurbished and possibly converted to the M1D configuration in that year. The rifle is in Fine condition with a strong bore. Every collection needs an M1 Garand and this one could be yours. Please see our photos and good luck!

Make: Springfield

Model: M1A Loaded

Serial Number: 149281

Year of Manufacture: October, 2002 (Verified with Springfield

Caliber: .308 / 7.62X51

Action Type: Semi-Automatic, box magazine fed.

Markings: Rear top of the receiver is marked “US RIFLE M1A SPRINGFIELD ARMORY 149281”. The top of the barrel is marked, “NM.308”. The top of the bolt carrier group is marked “7790186-SA F00071”.

Barrel Length: 22”. 25” with M14 classic long slotted flash suppressor.

Sights / Optics: The front sight is a National Match front sight. The Rear Sight is a Match-Grade Aperture Sight with .0520 aperture, ½ MOA windage and elevation increments.

Stock Configuration & Condition: The stock is the traditional M14 Walnut stock with two sling swivels, semi pistol grip, straight comb, a 13.25 LOP, butt storage compartment and the hinged metal buttplate. The top handguard is brown composite. The stock shows minimal storage wear with a few minor compressions. There are no chips or cracks. The stock is in about Excellent condition.

Magazine Quantity & Condition: None.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no visible erosion in the bore. This rifle appears unfired outside of factory testing. In this writer’s opinion the bore rates 10/10.

Overall Condition: This rifle is in Excellent to Like New In Box condition with only very minor storage wear and the addition of the scope rail.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a AA & E Leathercraft leather sling in Excellent condition.

Our Assessment: The Springfield M1A Loaded rifles are a series of semi-automatic rifles that combine the classic design of the M14 with modern enhancements to deliver superior accuracy and performance. These rifles are chambered in .308 Winchester (7.62x51mm NATO) and are renowned for their reliability, accuracy, and versatility. One of the key features of the M1A Loaded series is the National Match barrel, which is designed to provide exceptional accuracy. The barrel is medium-weight and made from high-quality steel. It is air-gauged and meticulously crafted to ensure consistent performance, making it an excellent choice for precision shooting. The M1A Loaded rifles also feature a two-stage National Match trigger, which provides a smooth and crisp trigger pull with a pull weight of around 4.5 to 5 pounds. This type of trigger is highly valued by competitive shooters and marksmen for its ability to enhance accuracy by allowing precise control over each shot. Another notable feature is the match-grade sights. The rear sight is a Match aperture with 0.5 MOA adjustments for both windage and elevation, while the front sight is a National Match front blade. These high-quality sights enable shooters to make fine adjustments and achieve precise aiming, which is crucial for long-range accuracy. In summary, the Springfield M1A Loaded rifles are highly regarded for their blend of traditional design and modern enhancements. With features like the National Match barrel and trigger, match-grade sights, and durable walnut stock, these rifles offer excellent accuracy and reliability. They are suitable for a wide range of applications, including precision shooting, hunting, and competitive marksmanship, making them a versatile and valuable addition to any shooter's collection.

This original 1943 World War II-era placard was issued by the Labor Management Committee as part of a national campaign to curb absenteeism on the home front. Poster #28 in the series, it vividly captures the urgency and patriotic fervor of the time, urging American workers to recognize the critical importance of consistent labor in wartime production. With the war effort hinging not only on military might but also on industrial output, posters like this played a vital role in shaping public behavior and morale.

Framed and measuring approximately 23" by 14", this piece features bold graphics and concise messaging meant to stir a sense of duty among the workforce. “DONT LET THIS BUG GET YOU!” isn’t just a slogan; it reflects the era’s cultural ethos, where attendance at work was directly linked to victory overseas. It’s a striking reminder that the battle was fought not only on the frontlines, but also in factories, shipyards, and assembly lines across the country. This will be excellent in a man cave or a shop as a classic piece of WWII art.

What an outstanding piece of WWII home front history! This original War Production Drive poster, “If the Absentee Bugs Bite You…”, is a vivid reminder of how every worker counted during America’s wartime push. Issued as Bulletin Board Placard No. 27, this poster features a dynamic and eye-catching illustration of a worried worker swatting at cartoonish “bugs” labeled with real-world issues like “Poor Transportation,” “Child Care,” “Illness,” and “Bad Housing.” It calls on workers to speak up about the problems affecting their attendance by contacting their Labor Management Committee—an incredible example of how the U.S. government used clever, approachable artwork to rally industrial support for the war effort. 20” x 13.5”

This isn’t just a poster—it’s a time capsule. Bold colors, punchy design, and a clear message all combine to capture the spirit of wartime collaboration and determination. These posters weren’t just decoration—they were a vital part of the communication strategy that kept America’s factories running and troops supplied. Whether you’re a collector of WWII memorabilia, vintage labor history, or graphic design, this placard is a thrilling and rare find!

Now this is a showstopper! This original World War II propaganda poster, “Keep Him Flying!”, delivers a bold, emotional appeal to the American public during one of the most pivotal times in history. Featuring stunning artwork by artist Schreiber, the poster captures a U.S. fighter pilot climbing into his aircraft with determination in his eyes, backed by a vivid sunrise sky. Below him on the fuselage are six rising sun kill marks—clear victories over enemy aircraft. The message is clear and urgent: by buying war bonds, citizens on the home front play a direct role in keeping America’s warriors in the fight.

This poster is a brilliant example of wartime visual messaging, combining patriotism, urgency, and emotional impact. It wasn’t just about raising money—it was about fueling a nation’s morale and uniting every American behind a common goal. Posters like this were plastered in public spaces, factories, schools, and government buildings across the country, and they remain some of the most iconic and collectible artifacts from the era. With bold color, riveting composition, and a call to action that still resonates, this piece is an absolute gem for any WWII collector or enthusiast!

This striking vintage World War II-era poster, titled “Keep ’Em Coming!”, dates to 1943 and served as a bold call to arms on the home front. Designed as part of the U.S. government's wartime propaganda campaign, this poster encouraged American citizens to contribute not just material goods or labor—but ideas. The message is clear and compelling: everyday people were being asked to share innovations, suggestions, or practical solutions that could benefit the war effort. In a time when national unity and ingenuity were paramount, posters like this one helped harness the creative energy of the public. Professionally framed, this poster measures approximately 20.5 inches by 30 inches overall. The frame is solid and complements the period feel of the piece, offering a clean presentation while protecting this wartime relic. This is more than just wall art—it’s a conversation starter and a preserved piece of history. With its mix of patriotic fervor and civilian empowerment, “Keep ’Em Coming!” reminds us that in times of struggle, innovation and determination can come from anywhere.

Make: Winchester

Model: M1 Carbine

Serial Number: 5634077

Year of Manufacture: February 1944 to November 1944

Caliber: .30 Carbine

Action Type: Semi Automatic rifle fed by Detachable Magazines.

Markings:

The top-rear of the receiver is marked “WINCHESTER TRADEMARK / 5634077”

The top-front of the receiver is marked “U.S. CARBINE”, “CAL .30 M1”.

The barrel is marked on the top 3.25” back from the front sight with “W” and 5.5” back with the “WP”.

The right side of the gas block is marked with a flaming bomb mark.

The barrel band is marked “AI”.

The front sight is unmarked.

The rear sight is marked Shield “H”-Hemphill MFG. Co.

The slide is marked “PI”.- an Inland Type IV Slide

The Trigger group is marked “W” and “O” for Winchester

The magazine release is marked “LT-G”.

The hammer is marked “-U-” for Underwood

The Safety Switch is marked with a circled “W”. - Winchester

The sear is unmarked.

The left side of the stock in the sling cut is marked with a Circled K and “5” - A post war Keystone Stock.

The upper handguard is unmarked.

The oiler is marked “IS”.

Barrel Length: 18”

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is a later style sliding aperture sight with a knurled windage knob dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, low wood stock with a four rivet handguard, a type two barrel band, and a lever safety. The LOP is 13 1/8” from the front of the trigger to the back of the buttplate. There is light handling wear. The top left side of the handguard has a long compression line and the front lip for the barrel band has been broken away. There are no visible chips or cracks. The metal buttplate has semi sharp checkering, wear and scratches around the edges, some minor surface rust developing, and has retained most of the finish in the checkering. Overall the furniture on this rifle is in Very Good + to Excellent condition as refinished.

Type of Finish: Parkerized and blued.

Finish Originality: Refinished.

Bore Condition: The bore is very bright and the rifling is defined. There is no visible erosion in the bore. Our gauge shows a muzzle of 1+. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains 80% of its finish. The bolt and receiver show very little wear on the friction surfaces. The trigger guard has lost finish on the edges, there is wear to the magazine well, the muzzle and front sight wings also show finish loss on the edges. The end of the barrel near the muzzle has some finish thinning and loss. The screw heads are sharp and the markings are clear. Overall this rifle is in Very Good+ condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle includes One 10rd and Two 15rd blued magazines along with a canvas buttstock magazine pouch, canvas sling, and M1 Carbine Canvas Carrying Case.

Our Assessment: This Winchester M1 Carbine, produced in 1944, represents a key period in the development and deployment of this iconic World War II firearm. Winchester, as one of the original contractors tasked with manufacturing the M1 Carbine, played a pivotal role in supplying these lightweight and versatile rifles to U.S. troops. The M1 Carbine offers a blend of historical significance and practical performance. Its lightweight design, paired with the mild recoil of the .30 Carbine cartridge, makes it a joy to handle on the range. Whether used for recreational shooting or as a centerpiece in a collection, this Winchester M1 Carbine embodies the craftsmanship and ingenuity of its era, offering both a tangible connection to World War II history and the reliability expected of a firearm designed for combat use. To better understand this M1 carbine please see our high quality photos.

Make: Underwood

Model: M1 Carbine

Serial Number: 2911530

Year of Manufacture: The receiver was made between July 1943 and February 1944. The barrel date is 12-43.

Caliber: .30 Cal carbine

Action Type: Semi Automatic rifle fed by Detachable Magazines.

Markings:

The top-rear of the receiver is marked “UNDERWOOD / 2911530”.

The top-front of the receiver is marked “U.S. CARBINE”, “CAL .30 M1”.

The barrel is marked with a “P” about 2.5” back from the front sight. The front of the barrel is marked “UNDERWOOD 12-43” with the flaming bomb.

The front sight is stamped with “EU” - A Type II Underwood part

The barrel band is unmarked.

The slide is marked on the inside with “-U-”, an Underwood slide.

The bolt is marked “-U-” for Underwood.

The rear sight is marked “S”.

The trigger group is marked “INLAND”.

The magazine catch is marked “M” and “E.I.” - Inland part

The left side of the hammer is marked “I.K.” for Rock-Ola.

The sear is marked “R.I.” - Inland part.

The Crossbolt Safety is unmarked

The magazine is marked “UQ” - Quality Hardware

The Stock is “IO” inside the sling well. -Inland

The lug is unmarked.

The upper handguard is marked “IO”. - Inland

Barrel Length: 18”

Sights / Optics: The front sight is a Type I fixed blade set between protective ears. The rear sight is a Type I flip aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, high wood stock with a two rivet handguard, a Type I barrel band and an early cross bolt safety. The LOP is 13 1/8” from the front of the trigger to the rear of the buttplate. This stock has been very lightly sanded and refinished as a result it shows very few marks and lines. There are still some minor lines and compressions. There are no visible chips or cracks. The upper handguard shows a few compressions. The metal buttplate has rub wear around the edges. Overall the stock is in Fine condition.

Magazine Quantity & Condition: This rifle includes one 15 round magazine. The magazine is in Good + overall condition.

Type of Finish: Parkerized / Blued

Finish Originality: Original

Bore Condition: The bore is bright, with well defined rifling and scattered erosion throughout. In this writer’s opinion the bore rates 6/10.

Overall Condition: This rifle retains about 70% of its metal finish. There is minor wear on the friction surfaces of the bolt and receiver. Parts of the slide, band, and receiver have taken a faint patina. There is some scattered erosion on the barrel. The markings are clear. The screw heads are tool marked and serviceable. Overall this rifle is in about Very Good + condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a total of one magazine.

Our Assessment: The Underwood M1 Carbine is a fascinating example of American ingenuity during World War II, produced by Underwood-Elliott-Fisher in 1943. Underwood, famous for its typewriters before the war, transitioned its precision manufacturing capabilities to support the U.S. military by producing M1 Carbines. This particular example features almost all matching Underwood parts, showcasing the company's ability to deliver complete and reliable firearms during wartime. The barrel, also an Underwood product, is dated 12-43, aligning perfectly with the rifle's production date and further emphasizing the consistency of Underwood’s manufacturing process.

With its near-complete matching Underwood and Inland parts, Underwood barrel, and inland stock, this M1 Carbine is a remarkable piece of military history. The association with Underwood’s legacy as a typewriter manufacturer turned wartime firearm producer makes this carbine even more compelling. It stands as a testament to the adaptability of American industry and the collaborative efforts of contractors and arsenals to supply reliable weapons to soldiers across the globe. This carbine is not only a collector's piece but also a vivid reminder of the critical role American manufacturers played in securing victory during World War II. To better understand this M1 carbine please see our high quality photos.

Make: Irwin-Pedersen

Model: M1 Carbine

Serial Number: 3214163

Year of Manufacture: Receiver 1943, Barrel Date 2-1943

Caliber: .30 Carbine

Action Type: Semi-Auto

Markings:

Receiver: “IRWIN-PEDERSEN 3214163”, “U.S. Carbine CAL .30 M1” and on the left “3”.

Barrel: “UNDERWOOD 2-43” with a flaming bomb, 5.5” back from the front sight there is a “P”, the flat also has a flaming bomb.

Front sight: “N”-IBM

Slide: “S’G’” on the inside. Saginaw Gear

Barrel band: “UP”

Bolt: Unmarked

Rear Sight: “B-IP” and a round “S”. Beckwith MFG CO. correct for Irwin Pedersen

Trigger Group and Hammer: “IP” Irwin Pederson

Safety: “IP-A” American Electric Heater CO. for Irwin Pedersen

Magazine Catch: “B-IP” Saginaw Gear

Sear: “SW-S’G’” Saginaw Gear

Upper Hanguard: “IR-IP” with a flaming bomb. Irwin Pedersen

Stock: Pommel circle “P”, Right flank Ordnance wheel and “SG” in a box, Sling cut: “IR-IP” with a flaming bomb this stock was made by Saginaw Gear for Irwin Pedersen. Just in front of the sling cut is marked “STD PROD RWH” indicating this rifle may have been refurbished or inspected by Standard Products Co as part of a post war inspection.

Lug: Unmarked

Magazine: “SQ SP-SG” Seymore Smith & Sons.

Barrel Length: 18"

Sights / Optics: The front sight is a fixed blade with protective ears. The rear sight is the early L type dual aperture “flip sight” dovetailed to the receiver.

Stock Configuration & Condition: The stock is a low wood, I cut stock with a type one barrel band, two rivet handguard, checkered metal buttplate with an oiler. The length of pull is 13.25”. The stock shows scattered handling wear with compressions and lines. There is a notable scratch on the right side of the nose and a rub mark from the sling. The upper handguard shows minimal wear with no visible chips or cracks. The buttplate shows normal wear with rub marks around the edges. The markings on the stocks are surprisingly clear. Overall this stock is in Very Good+ condition.

Magazine Quantity & Condition: One 15 round magazine in Excellent condition.

Type of Finish: Parkerized

Finish Originality: Original.

Bore Condition: The bore is bright and the rifling is defined. There is minor erosion present with pitting in the last third of the bore. In this writer’s opinion the bore rates 7.5/10.

Overall Condition: This rifle retains about 97% of its original metal finish. The metal surfaces have turned dark green with age. The bolt shows minor rub wear on the friction surfaces. The barrel shows some finish thinning and small marks scattered throughout with some finish loss of the leading edges. The markings are clear and the screw heads are sharp. Overall this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: One magazine and a green canvas sling.

Our Assessment: The Irwin Pedersen M1 Carbine is one of the rarest and most collectible variants of the WWII era carbine, as the company produced only a small number before its contract was canceled due to failure to meet military standards. This example was completed by Saginaw Gear in early 1943, after Saginaw took over Irwin-Pedersen’s Grand Rapids facility. It features an Underwood barrel, with most of the trigger group components still Irwin Pedersen made, and a few parts sourced from Saginaw and Saginaw’s subcontractors. The rifle includes a Saginaw Gear and Irwin Pedersen marked stock. The stock also bears a Standard Products Co. post-war inspection stamp, indicating it was likely inspected and tested by the private contractor after WWII.

Irwin Pedersen was originally contracted to produce over 100,000 carbines but delivered fewer than 3,500 units. These units failed to meet the standards and as a result the U.S. government reassigned the factory to Saginaw. This led to many of the carbines being completed by Saginaw using Irwin-Pedersen parts. These Irwin produced Saginaw completed rifles are highly sought after today especially with the Standard Products Co. inspection stamp. These rifles represent a unique moment in wartime production history, showcasing the challenges of scaling up manufacturing quickly under the pressure of war. A carbine like this, blending Irwin-Pedersen rarity with Saginaw completion and post war inspection history, is a fascinating, rare and valuable piece indeed.

Make: Winchester

Model: M1 Carbine

Serial Number: 1140573

Year of Manufacture: Early 1943

Caliber: .30 Carbine

Action Type: Semi Auto.

Markings:

Receiver: “WINCHESTER TRADEMARK / 1140573”, and “U.S. CARBINE”, “CAL .30 M1”.

Barrel: The top of the barrel is marked “W” 3.25” back from the front sight and “WP” 5.5” back. The right side of the barrel above the gas block is marked with a flaming bomb inspection stamp. The right side of the gas block is marked with a flaming bomb stamp.

Front Sight: “NN” Nolan Machinery CO.

Barrel Band: Unmarked

Rear sight: “WSI” Wadsworth Watch Case Co.

Slide: unmarked

Trigger group: “W” and “J” for Winchester

Magazine release: Very faint “WI” Wadsworth Watch Case

Hammer: “WU” Universal Winding CO.

Safety: “EW” for Sargent & CO.

Stock: The sling cut is marked “W” for Winchester, the inside of the stock “V”, pommel square outlined “P”. The right flank is marked “W.R.A. G.H.D.” with an ordnance wheel. The right wrist is marked “USAA1” indicating a San Antonio Armory rebuild or inspection.

Lug: “W” for Winchester

Upper handguard: “W” for Winchester and “Z”

Barrel Length: 18”

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, low wood stock with a two rivet handguard, a type one barrel band, and a crossbolt safety. The LOP is 13.25” from the front of the trigger to the back of the buttplate. The stock shows scattered marks and wear with one notable chip in the leading edge of the pommel. The upper handguard shows similar wear with a small crack originating from the left side rivet and a compression on the right side. The buttplate retains its checkering with scuffmarks around the edges minor finish loss and minor oxidation. Overall the furniture is in about Good + condition.

Type of Finish: Parkerized and blued.

Finish Originality: Original.

Bore Condition: The bore is very bright with well defined rifling. There is no visible erosion. In this writer's opinion the bore rates 9.75/10.

Overall Condition: This rifle retains 96% of its finish. The metal finish has turned brown with age. The bolt and receiver show minor wear on the friction surfaces. The trigger guard has lost finish on the edges, the muzzle and front sight wings also show finish loss on the edges with some minor finish thinning on the barrel. The end of the barrel near the muzzle has some minor finish thinning. The screw heads are sharp and the markings are clear with the exception of the magazine catch. Overall this rifle is in Good+ to Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: Includes one SW marked magazine in Excellent condition, an oiler and a green canvas sling.

Our Assessment: This Winchester M1 Carbine, made in early 1943 during the first production run, is a highly collectible WWII rifle from one of the most sought-after manufacturers. This example features a low wood stock, correctly marked "WRA GHD" for Winchester Repeating Arms and Guy H. Drewry, the U.S. Ordnance officer who inspected Winchester’s carbines. It retains mostly Winchester parts, with some components sourced from Wadsworth Watch Case Co., a known wartime subcontractor. The stock is also marked "USAA1," indicating a rebuild or inspection at San Antonio Arsenal, adding to its service history. The L-type dual aperture sight is correct for early production, maintaining the carbine’s original battlefield configuration.

As one of the original M1 Carbine producers, Winchester was the only private company contracted to both design and manufacture the rifle, making its examples highly desirable. The M1 Carbine was prized for its lightweight design, semi-automatic action, and versatility, serving officers, paratroopers, and support troops across all WWII theaters. This early production Winchester, with its correct mix of parts and original markings, is a fine historical example, reflecting the urgency and craftsmanship of America’s wartime production.

Make: Inland Division of General Motors

Model: M1A1 Paratrooper Carbine

Serial Number: 5376535

Year of Manufacture: Receiver January-August 1944. Barrel Date 7-1944

Caliber: .30 Carbine

Action Type: Semi-Automatic

Markings: Receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 5376535”.

Barrel: on the flat is stamped with the Inland Hieroglyphics, “P” 5” back from the front sight. The barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 7-44”

Front sight: “N”-International Business Machine part

Barrel band: “II” for International Silver Co.

Slide: “7160091 Q” and “PI” on the inside. For Packard Inland.

Rear sight: with a square corner “S” on the left side most likely a Saginaw Gear sight.

Bolt: unmarked.

Trigger group: “INLAND”.

Magazine release: “M”

Crossbolt safety: unmarked.

Hammer: “I-I” for International Silver CO.

The oiler: “BK” post war oiler made by Poley Bros.

Upper handguard: “IO” for S.E. OVERTON CO.

The inside of the stock is marked “IO” for Inland Overton, The front of the pistol grip is marked with a “P”, the bottom of the pistol grip is marked with a small ordnance wheel and “RI3” for Richardson, correct for Inland. The stock has the correct steel rivets. The metal buttplate is marked “B257614”, the pie emblem, and “7” all of these markings are correct for an M1A1 Stock. The left side of the stock is also marked “AAF” indicating an Augusta Arsenal rebuild.

Barrel Length: 18"

Sights: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock is a real M1A1 paratrooper stock with a folding wire frame stock, leather cheekpiece, pistol grip, type 2 barrel band, and crossbolt safety. The length of pull is 13” from the trigger to the buttplate. The upper handguard shows only minor handling wear with no visible chips or cracks. The stock shows handling wear scattered throughout with the characteristic rub mark from the buttplate. The stock has two small cracks forming from the rear lug one on either flank of the stock with a small chip out of the rear of the right side chip where it meets the lug. The stock folds correctly and the spring on the buttplate is strong. This stock is in Good to Good+ condition and would rate in Very Good+ to Excellent condition if not for the cracks.

Magazine Quantity & Condition: One 15 round magazine marked “U”. The magazine is in Very Good condition with some minor surface rust on the nose.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is very bright, with defined rifling. The bore shows lines and marks from use. There is some minor pitting towards the last third of the bore. In this writer's opinion the bore rates 8.75/10.

Overall Condition: This rifle retains about 98% of its metal finish. The finish has turned brown / green with age. The action and round bolt show minor wear on the friction surfaces from use. The muzzle and sight wings show some slight finish loss as well. The markings are clear and the screw heads are sharp. Overall this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This carbine includes the magazine and a green canvas Paratrooper M1A1 case.

Our Assessment: This Inland Division M1A1 Paratrooper Carbine, made in July 1944, is an iconic folding-stock variant of the M1 Carbine, designed specifically for U.S. Airborne forces during World War II. This example retains almost all correct original parts and its original finish, with the few replaced components likely swapped at Augusta Arsenal, as indicated by the "AAF" marking on the stock. Inland, a division of General Motors, was the primary producer of the M1A1, manufacturing over 140,000 units between 1942 and 1945. Featuring a 15-round detachable magazine, a short 18-inch barrel, and a folding metal stock, the M1A1 was lightweight, compact, and well-suited for paratroopers who needed a reliable, easily transported rifle when jumping into combat. An original, arsenal-refurbished Inland M1A1 like this one is a prized piece of history, representing the bravery and ingenuity of American paratroopers in World War II.

Make: Inland Division of General Motors with a Saginaw Gear made receiver.

Model: M1 Carbine

Serial Number: 917878

Year of Manufacture: Receiver Late 1943, Barrel Date 10-43.

Caliber: .30 Carbine

Action Type: Semi-Automatic

Markings:

Receiver: “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 917878” below the wood line on the left hand side “SG”, the bottom of the receiver is marked with an “R” & “G”.

Barrel: on the flat is stamped with the Inland Hieroglyphics, Top of the barrel is marked “P” about 5” back from the front sight. The end of the barrel is marked “INLAND MFG. DIV. / GENERAL MOTORS / 10-43”. The top of the chamber “3”.

Front Sight: “N” IBM Part

Barrel band: Unmarked

Slide: “PI” on the inside-Packard Inland

Bolt: Unmarked

Rear Sight: “S” with rounded corners.

The trigger group is marked “INLAND”

Hammer: “NI” National Cash Register Co. correct for Inland.

Safety: Unmarked

Sear: “R.I.”

Magazine Catch: “EI” for Eaton Pond Co.

Upper Handguard: “IO” Inland Overton

Stock: Circle “P” on the pommel, sling cut “IO” for Inland Overton, Right flank marked with a large ordinance wheel.

Barrel Length: 18"

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock is an Oval cut, high wood stock, with a two rivet handguard, type one barrel band, cross bolt safety and a checkered metal Buttplate. The LOP measures about 13” from the front of the trigger to the back of the buttplate. The wood shows handling wear scattered throughout with a notable series of scratches on the left side just behind the nose. The leading edge of the pommel has several chips and there is a horizontal crack forming on the right flank just below the charging handle. The upper handguard shows light handling marks with one notable depression on the left edge of the sighting groove. The metal butt plate has semi-dulled checkering, has turned brown with age, and shows pitting from oxidation. Overall the stock is in Good+ condition.

Magazine Quantity & Condition: One 15 round “KI” marked magazine. The magazine shows surface rust freckling in the bluing. Overall the magazine is in good condition.

Type of Finish: Parkerized / Blued

Finish Originality: Original

Bore Condition: The bore is very bright with well defined rifling. There is no visible erosion. In this writer's opinion the bore rates 9.75/10.

Overall Condition: This rifle retains about 98% of its metal finish. The magazine catch, bolt, and friction surfaces of the receiver show the majority of wear with the bolt a small portion of its finish. Most of the metal surfaces have turned green/brown with patina and age. The barrel has a few small nicks in the finish. The screw heads are sharp and the markings are clear. Overall, this rifle rates in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle includes the magazine and a sling.

Our Assessment: This Inland Division M1 Carbine, made in October 1943, is a classic WWII-era rifle, highly sought after by collectors for its historical significance and production pedigree. This example features a High Wood stock, an SG-made receiver, and almost all correct parts with its original finish, making it a well-preserved piece. Notably, it includes a Packard Inland slide and a National Cash Register hammer, components sourced from Inland’s network of subcontractors during wartime production. The L-type aperture sight is correct for mid-1943 production, maintaining the rifle’s original battlefield configuration. The bore rates 9.75/10, indicating exceptional rifling and minimal wear, making this carbine a top-tier example of a wartime Inland.

The M1 Carbine was a lightweight, semi-automatic rifle issued to troops needing a more compact weapon than the M1 Garand, including paratroopers, officers, and support personnel. Inland, a division of General Motors, was the largest producer of M1 Carbines, ensuring their widespread use across all major WWII theaters. This Inland example, with its correct mix of wartime parts and original finish, represents a fine collectible piece, showcasing the durability and effectiveness that made the M1 Carbine a critical tool for U.S. forces in World War II and beyond.

Make: Remington Rand

Model: 1911A1

Serial Number: 1426734

Year of Manufacture: March 1944, C&R

Caliber: .45 ACP (Automatic Colt Pistol)

Action Type: Semi-Automatic, Single Action, Fed by Detachable Magazine

Markings: The left side of the slide is marked “REMINGTON RAND INC. / SYRACUSE, N.Y. U.S.A.”. The frame is marked “UNITED STATES PROPERTY / NO. 1426734” and “M1911A1 U.S. ARMY”. The left side of the frame bears the Ordnance inspector’s mark “FJA” (Frank J. Atwood) below the slide stop, with a “P” proof mark near the magazine release. The right side of the frame has the Ordnance Department’s crossed cannons emblem behind the grip. The top of the slide has a “P” proof in front of the rear sight. The barrel is marked “HS” and “P” on the lug.

Barrel Length: 5”

Sights / Optics: The front sight is a fixed blade. The rear sight is a dovetail-mounted square-notch.

Stock Configuration & Condition: The grips are a pair of checkered brown plastic panels with reinforcing rings around the screws and interior reinforcing ribs. The grips show minor handling wear with light flattening to the checkering. There are no chips or cracks. The grips rate in about Very Good to Fine overall condition.

Magazine Quantity & Condition: One 7-round .45 ACP magazine, marked “R” on the toe, in Good condition with minor surface wear.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This pistol retains about 90% of its parkerized finish. The balance of the finish shows general edge wear, some light handling marks, and minor thinning at typical contact points including the front strap, muzzle, and high points of the slide. There are faint drag lines from the slide stop and safety. The screw heads are sharp. The pins are clean. The markings are sharp and clear. Overall, this pistol rates in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Remington Rand 1911A1 pistols are among the most iconic American military sidearms of the 20th century. Produced during World War II, these pistols were designed to meet the urgent wartime need for reliable handguns and are now highly sought after by collectors. Remington Rand became the largest producer of 1911A1s during WWII, delivering approximately 877,000 units from 1943 to 1945.

This particular example, made in March 1944, bears all the hallmarks of a correct Remington Rand including the “FJA” inspector mark, “P” proofs, and correct Keyes Fiber grips. Its original parkerized finish and wartime features remain intact, and the bore is excellent—making it desirable both for historical collectors and shooters.

For collectors of U.S. military firearms, especially WWII-era pieces, this Remington Rand 1911A1 is a strong example with honest wear, correct configuration, and no import marks. It would make a fine centerpiece in any collection, a great shooter, or a worthy display item for those honoring the Greatest Generation.