
Premier Firearms Auction - Day 3
Premier Firearms Auction - Day 3
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Description
U.S. Springfield Model 1873 Trapdoor Rifle with Metcalfe Device
Lot # 3126 (Sale Order: 126 of 616)
Patented in 1875, the Metcalfe device was invented by Ordnance officer Henry Metcalfe. It consists of a steel mounting bracket installed on the rifle and interchangeable wooden cartridge blocks. The blocks were to be issued pre-loaded and carried on the belt, replacing the cartridge boxes of the day. While the system never took off, echoes of it can be seen in the practice of issuing ammunition in pre-loaded "stripper clips" starting in the 20th century. Only 100 Model 1870 and 1,008 Model 1873 rifles were fitted with the device. The Model 1873 examples were never used and are assumed to have been entirely disposed of via disassembly or sales. The stock has a very good fit and a crisp "ESA" cartouche on the left flat. The front receiver ring is marked "MASS", and the top of the breechblock is marked with an additional "E". The rifle otherwise has the standard Model 1873 markings and features including the low arch breechblock and circle script "P" cartouche behind the trigger guard. The serial number falls near the accepted range for the experimental rifles.
Class: Antique
Good as assembled. The metal surfaces have 25% of the faded original finish along with an established brown patina. There are some scattered minor marks. The stock is very fine with some small pressure marks and a few scratches and retains a dark oil stained appearance. The two click tumbler action functions fine, and the markings are clear throughout. A solid representative example of a unique U.S. Springfield Trapdoor Rifle with experimental Metcalfe device.
Indian Wars Era U.S. Spencer Model 1865 Repeating Carbine
Lot # 3127 (Sale Order: 127 of 616)
Spencer Repeating Rifle Co. manufactured the Model 1865 carbines in 1865-1866, with the first deliveries in April 1865, serial numbered in the approximate range 1-23000, chambered for use with 56-50 "50 Spencer" rimfire and equipped with the Stabler cut-off. Spencers continued to be used by the U.S. Army in the American West after the Civil War during various conflicts with Native American tribes until they were replaced by the Springfield Trapdoor rifles and carbines. Many also found their way into civilian and Native American hands, and saw use into the 20th century. Oval bordered script "ESA" (Erskine S. Allin) inspection cartouche stamped on the left side of the stock wrist, with small single letter inspection initials on various components.
Class: Antique
Fine, retains 30% original blue finish on the barrel, 60% vivid original case colors on the frame and components, with scattered mild brown surface freckling and a mix of smooth gray and brown patinas on the balance, with sharp markings and edges in the metal. Wood is also fine with defined edges, scattered dents and scratches, a few chips, and a defined cartouche. Mechanically excellent.
Springfield/Winchester-Hotchkiss First Model Army Carbine
Lot # 3128 (Sale Order: 128 of 616)
This First Model Hotchkiss carbine was built using a mix of Winchester and Springfield components and would have been used in early Army field trials. Only 501 are believed to have been manufactured. Many were converted into Second Models in 1881 or otherwise altered and re-issued for additional trials. Table #5 Springfield Research Service list on page 344 of "U.S. Military Bolt Action Rifles" by Bruce Canfield lists this example by serial number as having been shipped from Springfield Armory on June 23rd, 1879. It has "US" and "V/P/eagle head" proof and inspection marks at the breech, the three-line Winchester address and Hotchkiss patent marking on the left side of the action followed by the serial number, Henry Nettleton "HN." inspector marks, the distinctive first model magazine cut-off on the right, a correct First Model oval "ESA/1878" inspection cartouche marked next to the saddle ring, and a script "P" proof behind the trigger guard. "GDM" (George D. Moller) collection initials marked at the toe of the stock.
Class: Antique
Very good with brown patina overall and 20% original blue finish in protected areas, on the barrel band, trigger guard and buttplate tang. Stock is fine with scattered light scratches and dents, a chip at the toe, and a mostly clear cartouche (top edge faded). Mechanically excellent.
Provenance: The George Moller Collection; Property of a Gentleman
Providence Tool Co. Peabody Saddle Ring Carbine
Lot # 3129 (Sale Order: 129 of 616)
This Peabody carbine was manufactured by the Providence Tool Company in 1866-1871 with standard markings and features. The Providence Tool Co. inspection mark for foreign contract arms, "W.C.", is stamped on the left stock wrist.
Class: Antique
Excellent, retaining 90% plus blue on the barrel with some light brown patina and loss towards the muzzle end, and 85% plus bright case colors with thinning on the lever. Wood is very fine with small chips behind the lock and light handling marks throughout with a crisp cartouche. Mechanically excellent.
U.S. Springfield Model 1896 Krag-Jorgensen Bolt Action Carbine
Lot # 3130 (Sale Order: 130 of 616)
These carbines were used throughout the Spanish-American War and later in the Philippine Insurrection, most famously by future President Theodore Roosevelt's 1st Volunteer Cavalry "Rough Riders". Fixed blade front sight fitted with "C" marked detachable sight hood and 2,000 yard "C" marked ladder rear sight. The oil-quenched casehardened receiver is marked "1896.", "U.S./SPRINGFIELD ARMORY." and serial number "32981" on the left side. Correct high hump barrel band to protect the rear sight from bumping into the saddle boot, a short saddle ring on the left side followed by a partial boxed script "JSA/1896" cartouche with angled corners, a faint circled script "P" behind the trigger guard, and a flat buttplate with a trapdoor cleaning rod compartment. "1ST U.S.V.C. SANTIAGO CUBA. 1898" stamped on the underbelly of the stock (there is currently no serial number hit to positively verify this carbine as having been issued to the 1st Volunteers), an "N" carved ahead of the trigger guard, "CAC" punch dotted into the left of the buttstock, a "C" carved in the right of the buttstock, and three tick marks carved in the top of the comb. "GDM" (George D. Moller) collection initials marked at the toe of the stock.
Class: Antique
Very good plus, retaining 30% original blue finish on the barrel and band with some light wear, and the buttplate turned to a mottled gray/brown patina. 20% oil-quenched casehardened finish with some scattered light freckling and smooth gray patina on the balance. Stock is also very good with crisp grasping grooves, a crack at the rear of the handguard, scattered scratches, and light chips at the toe. Mechanically excellent.
Provenance: The George D. Moller Collection; Property of a Gentleman
U.S. Springfield Model 1896 Krag-Jorgensen Bolt Action Carbine
Lot # 3131 (Sale Order: 131 of 616)
These carbines were used throughout the Spanish American War and late in the Philippine Insurrection, most famously by future President Theodore Roosevelt's 1st Volunteer Cavalry "Rough Riders". Fixed blade front sight fitted with "C" marked detachable sight hood and 2,000 yard "C" marked ladder rear sight. The oil-quenched casehardened receiver is marked "MODEL 1896.", "U.S./SPRINGFIELD ARMORY." and serial number "89719" (8 has a punch mark on it) on the left side. Correct high hump barrel band to protect the rear sight from bumping into the saddle boot, a short saddle ring on the left side followed by a boxed script "JSA/1897" cartouche with angled corners, a faint circled script "P" behind the trigger guard, and a flat buttplate with a trapdoor cleaning rod compartment. "GDM" (George D. Moller) collection initials marked at the toe of the stock.
Class: Antique
Fine, retaining 40% original blue finish on the barrel and band with some light wear and the buttplate turned to a brown patina with scattered light pitting, and 30% oil-quenched casehardened finish on the receiver with some scattered light freckling and the flat of the side gate a smooth gray patina. Stock is also fine with crisp grasping grooves, some light scratches, and a few chips. Mechanically excellent.
Provenance: The George D. Moller Collection; Property of a Gentleman
Pre-WWI U.S. Springfield Model 1903 N.R.A. Sales Rifle
Lot # 3132 (Sale Order: 132 of 616)
This is a very desirable example of a U.S. Springfield Model 1903 N.R.A. sales rifle. This rifle is marked with the distinctive Ordnance shell and flame insignia over "N.R.A." underneath the front of the trigger guard assembly to differentiate it from the standard issued service rifles. These N.R.A. marked rifles were available only to N.R.A. members prior to U.S. entry into World War I. All N.R.A. sales rifles were brand new (never rebuilt or altered) and subjected to stringent inspection criteria to include hand selection of the rifle based on the beauty of the wood components for color and uniformity, overall high grade blue finish and star gauging of the barrel to ensure land and groove uniformity for the best possible accuracy. These rifles were intended for National Match shooting prior to World War I. The receiver is roll marked with the five-line, standard Springfield Armory markings, and the top of the barrel is stamped "S.A." above the Ordnance shell and flame insignia and the date "1-16". The rifle has an oil quenched casehardened receiver and all blued milled components that include the barrel bands, bolt, trigger guard, and floorplate. The safety and cut-off lever are casehardened. It is fitted with a walnut "S" style stock that has a single reinforcing bolt, high hump handguard with proper rear sight clearance cut and spring clips, and checkered steel buttplate with compartment. The rifle has a serrated trigger, dished windage and elevation knob, and rear sight leaf with the 2,850 yard notch. "H" marked on the bayonet lug, "C 6" marked on the right of the rear bolt lug, the left stock wrist is stamped with the Ordnance final inspection initials "J.S.A." in a rectangle, a small "D" in the cutoff recess, and a small "23" above a circled script "P" firing proof stamped behind the trigger guard. Includes a "1916" dated Springfield M1905 bayonet, serial numbered "639779", with tan canvas scabbard, "1915" dated Rock Island Arsenal M1907 leather sling, and oiler inside the butt compartment.
Class: Curio & Relic Long Gun
Very fine, retains 85% plus original blue and oil-quenched finish with some areas turned to a smooth brown patina and otherwise sharp markings and edges in the metal overall. Stock is excellent with crisp grasping grooves, defined edges, a few light scratches and handling marks, and a crisp cartouche. Mechanically excellent. Included bayonet and scabbard are both fine.
U S. Springfield Model 1915 Bolo Bayonet
Lot # 3133 (Sale Order: 133 of 616)
Developed in the early 20th century, the Model 1915 Bolo bayonet was one of the U.S. Army's attempts at a hybrid weapon that could reduce the loadout an individual soldier had to carry into the field. Intended for use in jungle environments, the bolo could serve as both a bayonet and a brush clearing tool. Though the daylight bayonet charge was becoming a thing of the past, observers of World War I and the Russo-Japanese War noted the rise of the night attack and its resultant brutal hand-to-hand combat; the determination was made that a bayonet should be a fighting weapon and nothing more, and all the odd ducks and promising experiments were pulled from the field. Either destroyed or discarded as surplus, it is believed that only about fifty Model 1915 Bolo bayonets remain. 20 3/4 inches overall, with a 15 5/8 inch blade marked "SA/(flaming bomb)/1916" on the left ricasso and "US/5923" on the right. Walnut grip panels, with an "eagle beak" pommel and standard 1905 type locking hardware. Scabbard is absent.
Class: Other
Very good with scattered mild spotting and gray patina on the original bright polished blade, 50% of the original blue finish on the furniture showing smooth brown and gray patina on the balance, distinct blade markings, and some light dings on the otherwise very good grips. This extremely rare U.S. Springfield Model 1915 Bolo bayonet is an immensely desirable accessory to accompany a U.S. Model 1903 rifle!
Special Order Sharps Model 1874 Sporting Rifle
Lot # 3134 (Sale Order: 134 of 616)
The copy of the factory letter indicates this rifle was shipped to H. Folsom & Company in St. Louis on October 9, 1876, and is listed as a "SPORTING OCTAGON RIFLE" in .44 caliber with a 32 inch barrel, 11lbs. 11 oz. weight, double set triggers, globe front sight, peep sight, and cost of $49. St. Louis was a mid-way stop for many goods ultimately headed to the West. The rifle has a globe front sight, the Old Reliable marking and Bridgeport address on top of the barrel, a replacement adjustable sporting rear sight, "CALIBRE 44" on top at the breech, "90" on the right at the breech ("9" stamped over a "7"), the 1869 patent on the left side of the action, a long range Vernier peep sight, adjustable double set triggers, and smooth Schnabel tip forearm and straight grip stock with checkered shotgun buttplate. Matching numbers are on the barrel, forearm, and upper tang.
Class: Antique
Very good with mottled gray/brown patina, spots of minor oxidation, and general moderate wear. The stock and forearm are also fine with the exception of a crack on the right side of the forearm at the tip and have some light scratches and dings. Mechanically excellent.
Remington No. 1 Rolling Block Mid-Range Target Rifle
Lot # 3135 (Sale Order: 135 of 616)
These Mid-Range Target Rolling Block Rifles were manufactured by Remington c. 1875-1890. The part octagon barrel is marked with the "E. REMINGTON & SONS. ILION. N.Y." address on top and has a windage adjustable globe front sight with a spirit level, "40 70" (.40-70/.40 2 1/4 Sharps Necked) marked on the bottom of the barrel ahead of the forend. The frame has the patent markings on the left and a mid-range vernier peep sight mounted on the upper tang. Matching serial number "6505" marked on the bottom of the barrel beneath the forearm, faintly legible on the rear surface of the forearm, on the lower tang and underside of the buttplate. "TP & W" is also marked on the bottom of the barrel beneath the forearm. The forearm is smooth and has a steel end cap, and the straight wrist stock has a checkered wrist and a smooth flat steel buttplate.
Class: Antique
Very good, exhibiting a smooth plum brown patina on the barrel with a patch of light pitting visible on the right middle, 60% plus original niter blue finish on the small parts, and strong traces of original case colors on the frame turned to a smooth gray/brown patina, with scattered spotting and sharp markings in the metal. Wood is fine with defined edges, some scattered light scratches and dings, some minor fading on the forearm, and crisp re-cut checkering. Mechanically excellent.
Rinaldo A. Carr Sub-Inspected U.S. Colt Cavalry Model Revolver
Lot # 3136 (Sale Order: 136 of 616)
Manufactured in 1890, this revolver is one of the U.S. Colt Cavalry Model revolvers in the serial number range 131187-140361 that were inspected by Ordnance Sub-Inspector Rinaldo A. Carr and has managed to survive in its original Cavalry Model configuration. Carr's sub-inspector "R.A.C." mark is found on the frame, barrel, cylinder, and bottom of the grip. Carr's script letter cartouche (traces) is on the right side of the grip. The left side of the grip has a partial outline of a script letter cartouche. The top of the barrel has the one-line Hartford address. A "K" Colt inspection mark is stamped below the serial number on the trigger guard and back strap. "P" proofmarks are stamped on the cylinder and barrel. The left side of the frame has the three-line patent dates marking followed by "U.S." Matching full or partial serial numbers are on the frame, trigger guard, back strap, cylinder, and barrel.
Class: Antique
Very good, retaining traces of original blue finish and faded original case colors overall, mostly visible in the protected areas with a smooth brown-gray patina on the balance. The re-oiled grip is also very good with faint cartouche on right side, traces of inspector initials on butt, edge wear and series of dings also on the butt. Mechanically fine.
Provenance: The Thomas Whiteman Collection
Crookes Brothers Sheffield Patriotic Etched Blade Belt Knife
Lot # 3137 (Sale Order: 137 of 616)
Manufactured around the time of the American Civil War, the Crookes Brothers firm of Henry and John was in operation from the very early 1860s, after their partnership with John Slater dissolved, until 1893 when Henry Crookes died. Bowie and belt knives such as this one were in extremely high demand on the American market during the period of westward expansion and the Civil War. It measures 11 3/4 inches overall with a 7 1/2 inch spear point blade. One side of the blade has a large etched panel that features the slogans "Americans ask for nothing but what is right", "O.K.", along with "And will submit to nothing wrong". These slogans are all ones that are often seen on Civil War period knives from a variety of Sheffield makers. The two-piece guard is German silver with floral scroll engraving. It is fitted with stag grip scales and a blank German silver escutcheon on one side. Includes a leather sheath with light gilt filled tooling and German silver fittings.
Class: Other
Very fine overall, the exceptional blade mostly bright with some scattered light spotting, a few light nicks and a minor bend in the edges, and crisp acid etching. The German silver is bright with crisp engraving. The grips are excellent with a few light handling marks. The sheath is fine with some mild wear.
U.S. Rinaldo A. Carr Sub-Inspected Colt Cavalry Mode Revolver
Lot # 3138 (Sale Order: 138 of 616)
This U.S. contract Colt Single Action Cavalry Model revolver was manufactured in 1890 and inspected by Ordnance Sub-Inspector Rinaldo A. Carr (R.A.C.) and Captain Stanhope E. Blunt (SEB). This revolver is among the last examples of the 37,063 Single Action Army revolvers purchased by the Ordnance Department between 1873 and 1891 and has managed to survive in its original Cavalry Model configuration. The revolver has the military blue finish on the barrel, ejector housing, cylinder, trigger guard and back strap. The frame, loading gate and hammer have a color casehardened finish, and the one-piece walnut grip is oil finished. The top of the barrel is roll-stamped with address "COLT'S PT. F.A. MFG. Co. HARTFORD CT. U.S.A." in "elongated block" letters. The left side of the frame is roll-stamped with the Colt three-date/two-line patent markings followed by the "U.S" property mark. The Carr's sub-inspector's initials "R.A.C." are stamped on the underside of the barrel, the bottom of the frame above the serial number, on the side of the cylinder and on the left heel of the grip. A "K" Colt sub-inspection mark is stamped on the trigger guard and back strap. "P" proof marks are stamped on the underside of the barrel in front of the "R.A.C." sub-inspection mark and on the side of the cylinder. Matching full or partial serial numbers appear on the frame, trigger guard, back strap, cylinder, and barrel. The lower left side of the grip is stamped with the date "1890" above the script initials "SEB" enclosed in a rectangle with rounded edges. The script sub-inspection mark consisting of the script initials "RAC" in a rectangle is stamped on the lower right side of the grip.
Class: Antique
Fine, retaining 50% plus original blue finish and 30% original case colors with a smooth gray patina on the balance. Front sight has been altered/modified most likely during period of usage. The grip is also fine with some very scattered handling marks and legible date and cartouches. Mechanically fine. A solid representative example of a U.S. Colt Cavalry Model Single Action revolver.
Provenance: The Thomas Whiteman Collection
Experimental U.S. Springfield Model 1888 "Positive Cam" Trapdoor
Lot # 3139 (Sale Order: 139 of 616)
This is a fine example of a very rare, one of only 100, Springfield Model 1888 "Positive Cam" trapdoor rifles that was manufactured in 1888. The "Positive Cam" rifle was an attempt by Springfield Armory to modify the Springfield trapdoor breechblock to eliminate the occasional failure of the locking cam mechanism. The "Positive Cam" rifles featured a modified breechblock marked "U.S./MODEL/1888". The breechblock has the screw that retains the firing pin located on the right side behind the thumb piece rather than on the underside. The "Positive Cam" itself is part of the breech locking device. All known examples of these rifles fall in the 400,000 to 416,000 serial number range and the stocks of all the rifles have the "SWP/1888" inspection cartouche. This rifle is in the correct serial number range and has the correct configuration breechblock, correct breechblock markings, receiver relief cut on the right side for cam shaft clearance and "SWP/1888" cartouche. The rifle has the standard blade front and Buffington rear sights, and a slotted button head cleaning rod. The lock and barrel have standard Springfield Armory markings and proofs, along with an "A" on top of the barrel at the breech. There is a discreet "GDM", George D. Moller Collection mark in the toe of the stock. These rifles are one of the rarest variations of the Springfield trapdoor rifles and were issued to the San Antonio Arsenal for testing. Most of them were subsequently issued to active units in Texas, New Mexico, and Arizona where they saw active service. Includes a U.S. M1873 socket bayonet, scabbard with "US" Watervliet Arsenal leather frog, and Rock Island Arsenal dark brown leather sling.
Class: Antique
Fine, retains 70% plus of the faded original blue finish overall and 50% of the original case colors with the balance having thinned to mostly a smooth grey patina, primarily at the muzzle and around the breech. The wood is also fine with some minor dings and scratches scattered throughout. Mechanically excellent. The bayonet, scabbard, and frog are all very fine with minimal wear.
Provenance: The George Moller Collection; Property of a Gentleman
.308 Anderson Guncraft 1897 Gatling Gun with Carriage and Tripod
Lot # 3140 (Sale Order: 140 of 616)
Manufactured by John Anderson of Anderson Guncraft in Lewisburg, Ohio, this is a modern made museum quality reproduction of a Colt Model 1897 Gatling gun, chambered for use with modern .308 Winchester ammunition. Anderson Guncraft is also world renowned for their museum level restorations of original Colt Gatlings. Features ten 32 inch barrels, feed cover for use with the included Bruce feed magazine, bronze housing, steel frame rails, barrels, internals, and crank handle. "MODEL 1897" marked on top right of the bronze housing with reproduction Colt Gatling type markings on top including "Model 1897/Cal.30/No1028", with the bottom having Anderson Guncraft maker, address, model, "CAL. .308 WIN." and serial number "028" markings. The gun is on a black painted steel carriage with green painted wooden wheels and ammunition boxes affixed. Also includes a black painted tripod with a bronze yoke and steel legs. This Anderson Gatling gun is consecutively serial numbered with the following lot, with that example being on a wooden carriage.Note: This item features a high-capacity magazine which has a capacity above 15 rounds and cannot be sold or transferred to residents in states where magazine capacity is limited to no more than 15 rounds. Please check your local laws and regulations prior to bidding.
Class: Modern Other Firearm
Very fine, retains 95% original blue finish with some scattered patches of light surface corrosion, and the bronze exhibits a mostly bright golden patina. Mechanically excellent. Carriage is also very fine with most of the original painted finish, and some corrosion visible on the wheel bands. Tripod is fine with some areas of corrosion visible on the legs.
.308 Anderson Guncraft 1897 Gatling Gun with Carriage and Tripod
Lot # 3141 (Sale Order: 141 of 616)
Manufactured by John Anderson of Anderson Guncraft in Lewisburg, Ohio, this is a modern made museum quality reproduction of a Colt Model 1897 Gatling gun, chambered for use with modern .308 Winchester ammunition. Anderson Guncraft is also world renowned for their museum level restorations of original Colt Gatlings. Features ten 32 inch barrels, feed cover for use with the included Bruce feed magazine, bronze housing, steel frame rails, barrels, internals, and crank handle. "MODEL 1897" marked on top right of the bronze housing with reproduction Colt Gatling type markings on top including "Model 1897/Cal.30/No1029", with the bottom having Anderson Guncraft maker, address, model, December 2000 date, "CAL. .308 WINCHESTER" and serial number "029" markings. The gun is on a green painted wooden carriage with wooden wheels and ammunition boxes affixed. Also includes a tripod with wooden legs and black painted iron fittings. This Anderson Gatling gun is consecutively serial numbered to the previous lot, with that example being on a steel carriage.Note: This item features a high-capacity magazine which has a capacity above 15 rounds and cannot be sold or transferred to residents in states where magazine capacity is limited to no more than 15 rounds. Please check your local laws and regulations prior to bidding.
Class: Modern Other Firearm
Very fine, retains 95% original blue finish with some scattered patches of light surface corrosion, and the bronze exhibits a mostly bright golden patina. Mechanically excellent. Carriage is also very fine with most of the original painted finish, and some corrosion visible on the wheel bands. Tripod is fine.
Pair Cased S&W New Model No. 3 Revolvers
Lot # 3142 (Sale Order: 142 of 616)
Excellent Pair of Parisian Retailer Marked and Cased Smith & Wesson New Model No. 3 Revolvers with Luis Arrieta Canas' Monogram -A) Smith & Wesson New Model No. 3 Revolver
Introduced in 1878, this Parisian retailer marked and cased collector's choice condition pair of S&W New Model No. 3 revolvers are only 40 serial numbers apart. The left side of each barrel has the Parisian retailer marking: "H. Faure Le Page a Paris." Each top strap features an engraved monogram for Luis Arrieta Canas. Canas' full name appears on the inscription plaque on the exterior of the case lid. The revolvers have custom dealer added trigger guard finger spurs. French proofs are found on the cylinders. Matching serial numbers are on the butt, right grip panel, cylinder, barrel and barrel latch. The double gun fitted retailer case is embossed "FAURE-LEPAGE/8.RUE DE RICHELIEU/A PARIS" on the inside of the lid, has a "Luis Arrieta Canas" engraved inlaid brass inscription plaque on the exterior of the lid, and contains a case key and two brass tipped wooden cleaning rods. A graduate of the Law School of the University of Chile, Luis Arrieta Canas (1861-1961) was a champion of Chilean arts, especially music. He used land purchased from his father to build the main centers of Chilean arts of the late 19th and early 20th centuries. Perhaps his most important contribution to the arts was the founding of Penalolen Musical Days, an experience for both performers and fans that introduced then still unknown musicians and musical styles to Chile.
Manufacture: Smith & Wesson
Model: 3 Russian
BBL: 6 1/2 inch solid rib
Stock:
Gauge: 44 S&W Russian
Finish: nickel
Grips: hard rubber
Serial Number: 19232
Class: Antique
Condition: Excellent, retaining 99% plus dealer applied nickel finish showing limited handling evidence. Vibrant original case colors remain on the hammer. The grips are also excellent with crisp checkering. Mechanically excellent.
B) Smith & Wesson New Model No. 3 Revolver
As described in "A".
Manufacture: Smith & Wesson
Model: 3 Russian
BBL: 6 1/2 inch solid rib
Stock:
Gauge: 44 S&W Russian
Finish: nickel
Grips: hard rubber
Serial Number: 19272
Class: Antique
Condition: Excellent, retaining 99% dealer applied nickel finish with very slight flaking and limited handling marks. Vibrant original case colors remain on the hammer. The grips are also excellent with crisp checkering. Mechanically excellent. The case is very good with a cracked lid, minor handling/storage marks throughout, and typical high edge wear on the lining. This set of Parisian retailer marked and cased New Model No. 3 revolvers with the added bonus of belonging to Luis Arrieta Canas would be hard to improve upon. A must have for the serious S&W collector.
Provenance: Dr. Gerald Klaz collection; Private Collection
Smith & Wesson Model 320 Revolving Rifle with Shoulder Stock
Lot # 3143 (Sale Order: 143 of 616)
Manufactured from 1879 to 1887, the Model 320 revolving rifle is one of the rarest Smith & Wesson firearms produced with a total production of 977. The Model 320 was manufactured using the frame, cylinder, and basic action of the New Model No. 3 revolver with some minor differences in the hammer and trigger, with the barrel being made of two pieces. A slot is cut into the butt and a hole drilled in the back strap to accommodate the shoulder stock. These firearms were serial numbered from 1 to 977 and out of the 977 manufactured, 514 had the 18 inch barrel. This example was also nickel plated which was even rarer than the barrel length with around 85-90 of the 977 featuring this finish instead of the standard blue. It will factory letter as shipped on May 10, 1892, and delivered to Hartley & Graham of New York City, the type of finish was not noted in the shipping record. The 18 inch barrel features a blade front sight, two leaf "V" notch rear sight, and two-line address/patent dates legend. Matching serial numbers appear on the butt, cylinder, barrel latch, and barrel. The barrel is fitted with a checkered hard rubber red mottled forearm with the S&W monogram on the underside. The grips are matching with S&W monograms in a circle at the tops. The New Model No. 3 tang-style stock is smooth walnut with nickel finished attaching iron and a checkered black hard rubber buttplate with S&W monogram. It is not tapped for a tang sight.
Class: Antique
Excellent, retaining 95% plus of the untouched original nickel finish with some scattered very light flaking. Traces of original case colors remain on the trigger guard. Hammer retains 90% original case colors. The forearm and grips are excellent with a few handling marks and overall crisp checkering. The stock is excellent, retaining 98% plus of the original nickel finish, a filled chip on the buttplate toe, and a few handling marks. Mechanically excellent.
Smith & Wesson New Model No. 3 Target Single Action Revolver
Lot # 3144 (Sale Order: 144 of 616)
The New Model No. 3 Target Model dominated target competitions in the late 1800s, and are found in the serial number range below 4,333. Of the 4,333 target variations manufactured, only approximately 2,900 were chambered in .32-44 caliber. The revolver has target sights, the two-line address/patent dates marking on top of the barrel rib, and matching serial numbers on the butt, right grip panel, cylinder, barrel, and barrel latch.
Class: Antique
Excellent, retaining 95% original nickel finish with a few minor handling marks and a cylinder drag line. The grips are very fine with crisp checkering. Mechanically excellent. A standout example of a S&W New Model No. 3 Target .32-44 revolver.
Smith & Wesson New Model No. 3 Revolver Shoulder Stock with Box
Lot # 3145 (Sale Order: 145 of 616)
Manufactured in limited quantities in the late 1800s, this is a very desirable shoulder stock for the Smith & Wesson No. 3 revolver. The mounting iron is nickel plated and it is fitted with a checkered hard rubber buttplate with the "S&W" monogram at the center. Includes the correct factory box.
Class: Other
Excellent, retains 99% plus of the original nickel finish on the mounting iron with some scattered light scratches and speckled storage grease residue. The wood is excellent with a few scattered light handling marks. The box is very fine with a separated lid corner and otherwise light wear. A fantastic example of a must-have accessory for the Smith & Wesson No. 3 revolver!
Cased L.D. Nimschke Engraved Smith & Wesson No. 1 1/2 Revolver
Lot # 3146 (Sale Order: 146 of 616)
Manufactured c. 1868-1875, this is an exceptionally fine example of an L.D. Nimschke engraved Smith & Wesson No 1 1/2 second issue revolver. The revolver is decorated with wonderful near full coverage engraving by renowned Master Engraver L.D. Nimschke. The embellishment features beautifully executed floral scroll with a punch dot background, rows of diamonds ending in flourishes of scroll on the sides of the barrel, and small areas of "basket weave" patterns on the barrel lug and top of the frame. Similar scroll patterns appear as smoke pulls in "L.D. Nimschke: Firearms Engraver" by Wilson on pages 42 and 95. The top of the barrel rib is marked with the standard one-line address and patent marking. The matching serial number is marked on the butt and inside the right grip panel. The right of the grip frame is stamped with a star and "F6", which is repeated on the rear face of the barrel lug. These appear to be assemblers marks, not the "factory rework star" seen later from the Smith & Wesson factory. It is fitted with a blade front sight and a notch rear sight in the cylinder stop. It is also fitted with an attractive pair of smooth rosewood grips. Includes a hardwood case with blank brass presentation plaque on the lid and red baize interior, as well as two keys and an extra hammer and cylinder stop.
Class: Antique
Excellent, retains 98% plus of the original nickel finish with some very light, pinprick type flaking on the rammer pin, a few scattered light handling marks, and crisp engraving overall. The grips are very fine with a few spot of flaked varnish and light handling marks. Mechanically functions, but hangs up on a couple of the cylinder notches. The case is very fine with some scattered handling/storage marks.
Provenance: The Cam & Deb Cooper Collection
Factory Engraved Smith & Wesson Model No. 1 Third Issue Revolver
Lot # 3147 (Sale Order: 147 of 616)
Manufactured between 1868 and 1881. The revolver displays about 50% coverage broad leafy scroll engraving on the frame, barrel, and cylinder. The revolver is fitted with a blade front sight, one-line address on the rib, notch rear sight, and attractive pearl grips. Assembly number "1U" marked on various components. Includes a red felt lined hardwood case and an empty box of .22 caliber ammunition.
Class: Antique
Excellent overall, retaining 97% original nickel finish with light handling evidence, crisp markings and engraving, and a few age lines on the grip. Mechanically functions with manual assistance. The case is very fine.
Provenance: The Cam & Deb Cooper Collection
Smith & Wesson Model No. 1 Revolver with Gutta Percha Case
Lot # 3148 (Sale Order: 148 of 616)
This revolver is a "Second Issue" manufactured between 1860-1868. The revolver has German silver blade front sight, "SMITH & WESSON. SPRINGFIELD. MASS." on top of the barrel, patent marking on the cylinder, notch rear sight, matching serial numbers on the butt and inside the right grip panel, and assembly markings "IJO" marked on various components. Included is a factory gutta percha case which features the No. 1 revolver motif on the lid along with "MANUFACTURED ONLY BY/SMITH & WESSON/SPRINGFIELD MASSACHUSETTS" and the 56 cartridge block on the purple interior. Approximately 5,000 of these cases, which were produced by Littlefield, Parsons & Co., were shipped with the No. 1 First and Second Issue revolvers.
Class: Antique
Very fine, retaining 70% original blue finish with some wear and patches of brown on the cylinder, 95% original silver finish with some flaking, and some edge wear. The grips are fine with edge wear and some dings. Mechanically excellent. The case is very good with breaks at the hinges, strong designs, a series of holes on the underside.
Provenance: The Cam & Deb Cooper Collection
Engraved A.D. Perry Breech Loading Percussion Pistol
Lot # 3149 (Sale Order: 149 of 616)
Manufactured c. 1854-1856 by the Perry Patent Arm Co. of Newark, New Jersey, these interesting breech loading pistols are based on the designs of Alonzo D. Perry, with this particular example showing very attractive, exhibition grade engraving. A small number of breech loading carbines based on Perry's designs were purchased by the U.S. government in the mid-1850s. These pistols show many similarities to the C. Sharps single shot pistols, while also having a tip-up breech block that functions similarly to the Hall rifles and carbines. This particular pistol is in the second variation configuration, having the longer serpentine loading lever extending past the grip, the guide screw in front of the pivot screw on the frame, and the automatic primer system mounted within the grip frame. This example shows extensive, wonderfully executed floral scroll engraving, with near full coverage on the frame, top of the breech block, and back strap, with flourishes on the lever and butt. The top of the breech block is marked "A.D. PERRY/PATENTED" and "PERRY PATENT ARM Co/NEWARK N.J.", which is in a banner. The pistol appears to be unserialized, indicating that it was potentially made for presentation or exhibition. The grip frame includes an integral butt cap which is fitted with a screw plug for the primer system and a release latch to remove the brass primer system tube for loading. There is a brass blade front sight fitted on the barrel and the grips are smooth walnut with "H.M. STEWART/WYNNEWOOD PA" hand carved inside the right panel.
Class: Antique
Very good, retains traces of the original blue finish with the balance a mixture of grey and brown patina, some scattered patches of light pitting/spotting, and crisp engraving overall. The grips are also fine with some minor dings and a few light edge chips. Mechanically excellent. These pistols are rarely available on the collectors market, let alone examples showing exhibition quality engraving like this one!
Provenance: The H.M. Stewart Collection; The David Condon Collection; The Robert Howard Collection; Property of a Gentleman
Sharps Second Type Breech Loading Single Shot Percussion Pistol
Lot # 3150 (Sale Order: 150 of 616)
Manufactured c. 1854-1857, this is a scarce example of a C. Sharps & Co. breech loading single shot pistol. Reportedly, only 850 of these pistols were produced across two variations, with this example being the second type, of which only approximately 350 were made. These second type pistols were slightly larger than those previously made and were .36 caliber rather than the .31 caliber first types. It features a lever activated falling block action, very similar to those found on Sharps rifles, and is fitted with a pellet primer system that is integral to the right side of the frame. The right side of the frame has the standard three-line C. Sharps address, while the left side has the three-line C. Sharps patent date marking. The matching serial number is marked on the left of the grip frame under the grip, rear of the breech block, and is stamped inside both grip panels. It is fitted with a brass blade front sight and a notch cut into the top of the frame for a rear sight, as well as a pair of nicely figured, smooth walnut grips.
Class: Antique
Fine, retains 50% of the original blue finish with the balance having thinned to mostly a smooth grey patina and some scattered small patches of light pitting/oxidation. The grips are also fine with light scratches and dings. Mechanically excellent. These Sharps pistols are rarely found in fine condition like this one!