Meat Processing and Packaging Equipment Auction

Meat Processing and Packaging Equipment Auction

Auction closed.
Auction closed.
Meat Processing and Packaging Equipment Auction

Meat Processing and Packaging Equipment Auction

Auction closed.
Auction closed.
Internet Premium: 18%
Instant Financing | Low PaymentsSee Special Terms for additional fees

10 Minute Extended Bidding

Share:

Description

Meat Processing and Packaging Equipment Auction

Sigma Auction


(812) 308-6400
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 6

Closed Lots

Maurer & Sohne Two Truck Stainless Smokehouse

Lot # 112      

Used Maurer * Sohne Smokehouse with:

  • Two truck
  • Approximate internal dimensions:
    • Length: 84 inches
    • Width: 44 inches
    • Height: 80 inches
  • Zesti Smoke Liquid Smoke Atomizer
  • Stainless steel construction with truck ramp
  • Electrical: 240V/3 phase/60 hz
Skidding, Rigging, and Loading Fee: $260.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Mepaco 420V 1000 Pound Stainless Steel Mixer Vacuum Stuffer

Lot # 107      

Used Mepaco 420V 1200 Pound Stuffer with:

  • Output:
    • Nominal: up to 20,000 pounds per hour
    • Maximum: up to 36,000 pounds per hour
  • Deaeration chamber capacity:
  • 24 cubic foot
  • 1,200 pounds
  • Maximum pressure: 150 psi (10.34 bar)
  • Power operated cover with:
    • FPT vacuum fitting: 1.25 inches
    • Lexan view windows
    • Safety interlock
  • Maximum pressure: 150 psi
  • Hydraulic power unit: 20 horsepower
  • Onboard load sensing system
  • Combination solid flight & paddle agitator
  • Stainless steel feed pump: 3 inches
  • 304 Stainless steel construction
  • Approximate overall dimensions (inches): 98 long x 47 wide x 64 high
  • Clearance for open cover height: 86 inches
Skidding, Rigging, and Loading Fee: $290.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Reiser Vemag 500 Dual Screw Stainless Steel Extruder

Lot # 113      

Used Reiser Vemag 500 Dual Screw Stainless Steel Extruder with: 

  • Filling rate: Up to 5,500 pounds per hour
  • Portioning speed: Up to 450 portions per minute
  • Portion weights:
    • Minimum: 0.17 ounces
    • Maximum: 1,058 ounces
  • Hopper capacity: 13 gallons
  • Hopper dimensions:
    • Diameter: 26 inches
    • Depth: 16 inches
  • Overall dimensions:
    • Length: 42 inches
    • Width: 22 inches
    • Height: 66 inches
  • Stainless steel construction
  • Mounted on casters
  • Digital controls
  • Electricals: 3 phase, 60 hertz, 220 volts
Skidding, Rigging, and Loading Fee: $112.50
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Treif Maschinenbau 400 Boneless Meat or Cheese Slicer

Lot # 115      

Used Treif 400 Divider Slicer with:

  • Can run meat without bones, sausages, cheese or fish
  • Maximum deposit length:  31.5 inches
  • Maximum diameter deposit:  11 inches long x 6.2 inches wide
  • Slice thickness range:  .019 inches to 1.1 inches
  • Output:  400 slices per minute, depending on product and product size
  • Minimum product temperature:  24.8 degrees Fahrenheit
  • Stainless steel construction 
Skidding, Rigging, and Loading Fee: $168.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Lutetia 2000lb Stainless Steel Marination Tumbler

Lot # 116      

Used Lutetia Marination Tumbler with: 

  • Capacity (approximately):
    • Pounds: 2000
    • Liters: 900
  • Time cycles: 15 minutes to 1 hour per load
  • Tumbler dimensions:
    • Length: 95.5 inches
    • Diameter: 45 inches
  • Infeed dimensions:
    • Height: 49 inches
    • Diameter: 23 inches
  • Manway diameter: 13 inches
  • Mounted on a stainless steel frame
  • Stainless steel construction 
  • Electrical: 230 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $468.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Hughes 002 2000 Pounds Per Hour Stainless Steel Blancher

Lot # 110      

Used Hughes Blancher with: 

  • Model 002-23440
  • Capacity:
    • 50 pounds per cubic foot
  • Drum length: 104 inches
  • Drum diameter: 64 inches
  • Product Bulk Density (wet): 2:1
  • Screen Perforations: 1/16 inch diameter
  • Water takeup rate: 0.9 BTU per pound
  • Cooking temperature: 50 degrees fahrenheit
  • Water capacity: 355 gallons
    • 3 gallons per minute
  • 2 minute cook time
  • 100% removable screen
  • Stainless Steel
  • Overflow: 100 psi
  • Steam Pressure; 1,000 pounds per hour
  • Steam Processing. 1 Horsepower Drive Motor
  • 8 inch diameter vent stacks at the end of cover
  • Steam Exhaust
  • Allen Bradley Controls
Skidding, Rigging, and Loading Fee: $630.10
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Lutetia 2000lb Vacuum Marination Tumbler

Lot # 117      

Used Lutetia Marination Tumbler with: 

  • Capacity (approximately):
    • Pounds: 2000
    • Liters: 900
  • Time cycles: 15 minutes to 1 hour per load
  • Tumbler dimensions:
    • Length: 95.5 inches
    • Diameter: 45 inches
  • Infeed dimensions:
    • Height: 49 inches
    • Diameter: 23 inches
  • Manway diameter: 13 inches
  • Mounted on a stainless steel frame
  • Stainless steel construction 
  • Electrical: 230 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $468.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Lutetia 2000lb Vacuum Marination Tumbler W/ 3 Horsepower Motor

Lot # 118      

Used Lutetia Marination Tumbler with: 

  • Capacity (approximately):
    • Pounds: 2000
    • Liters: 900
  • Time cycles: 15 minutes to 1 hour per load
  • Tumbler dimensions:
    • Length: 95.5 inches
    • Diameter: 45 inches
  • Infeed dimensions:
    • Height: 49 inches
    • Diameter: 23 inches
  • Manway diameter: 13 inches
  • Mounted on a stainless steel frame
  • Stainless steel construction 
  • Electrical: 230 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $468.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Lutetia 2000lb Vacuum Marination Tumbler W/ 3 Horsepower Motor

Lot # 119      

Used Lutetia Marination Tumbler with: 

  • Capacity (approximately):
    • Pounds: 2000
    • Liters: 900
  • Time cycles: 15 minutes to 1 hour per load
  • Tumbler dimensions:
    • Length: 95.5 inches
    • Diameter: 45 inches
  • Infeed dimensions:
    • Height: 49 inches
    • Diameter: 23 inches
  • Manway diameter: 13 inches
  • Mounted on a stainless steel frame
  • Stainless steel construction 
  • Electrical: 230 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $468.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Hobart 4156 Stainless Steel 15HP Meat Grinder

Lot # 120      

Used Hobart 4156 Stainless Steel 15HP Meat Grinder with: 

  • Output: 
    • First grind: Up to 125 pounds per minute
    • Second grind: 83 pounds per minute
  • Tray dimensions:
    • Length: 54 inches
    • Width: 26 inches
    • Depth: 8 inches
  • Overall dimensions:
    • Length: 54 inches
    • Width: 28 inches
    • Height: 38.5 inches
  • Motor: 15 horsepower, 1,725 RPM
  • Discharge diameter: 6.5 inches
  • Stainless steel construction
  • Analog controls
  • Electricals: 3 phase, 10 amps, 60 hertz, 200 volts
Skidding, Rigging, and Loading Fee: $120.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Boncor CM-16 Stainless Steel Meat Massager W/ 0.75 Hp Motor

Lot # 121      

Used Boncor Meat Massager with:

  • Working capacity:
    • Gallons: 225
    • Cubic feet: 30
  • (3) Agitation dimensions (inches):
    • Length: 14 inches
    • Width: 6
    • Thick: 2.5
  • Shaft diameter: 5 inches
  • Holding vat dimensions (inches):
    • Length: 43.5
    • Width: 36 
    • Depth: 33.5
  • Overall dimensions (inches):
    • Length: 48
    • Width: 42
    • Height: 74
  • Motor: 0.75 HP
  • Electrical: single phase, 60 hertz, 115 volts

Last application: ham

Skidding, Rigging, and Loading Fee: $123.20
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Paddle Blender with 9" Auger Feeder Discharge

Lot # 122      

Used paddle blender with:

  • Blender V shaped working area:
    • Length 72 inches
    • Width: 48 inches
    • V shaped depth 36 inches
  • Blending paddles:
    • 5 sets on:
      • 10 inch shafts
      • paddle: 4 X 8 inches
  • Auger with end discharge:
    • Length 72 inches
    • Diameter 9 inches
  • Auger and paddles are timed through a Browning 307 gear box driven by 7.5 HP US MOTORS motor
  • Electrical requirements: 208-230/460 volts, 60 hertz, 3 phase 
  • Overall Dimensions: 
    • Length110 inches
    • Width: 72 inches
    • Height: 60 inches
Skidding, Rigging, and Loading Fee: $344.20
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Stainless Smoke Generator with Hopper

Lot # 126      

Used Smoke Generator with:

  • Agitated Hopper:
    • Diameter: 24 inches
    • Depth: 24 inches
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Smoke Generator

Lot # 127      

Used Smoke Generator with:

  • Dimensions
    • Length: 36 inches
    • Width: 28 inches
    • Height: 60 inches
  • Hinged door access
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Vemag Smoke Generator

Lot # 128      

Vemag Smoke Generator:

  • Top load agitated hopper
    • Diameter: 32 inches
    • Depth: 23 inches
  • Side mounted exhaust
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Stainless Steel Smoke Generator

Lot # 129      

Used Smoke Generator with:

  • Agitated Hopper:
    • Diameter: 30 inches
    • Depth: 28 inches
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Vemag Stainless Steel Smoke Generator

Lot # 130      

Used Vemag Smoke Generator with: 

  • Agitated hopper
    • 32 inch width
    • 35 inch depth
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Smoke Generator

Lot # 131      

Used Smoke Generator with:

  • Dimensions
    • Length: 36 inches
    • Width: 28 inches
    • Height: 60 inches
  • Hinged door access
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Hobart 4356 Stainless Steel Dual Shaft Mixer Grinder

Lot # 123      

Used Hobart 4356 Mixer Grinder with:

  • Production rate: up to 160 pounds per minute
  • Capacity: 500 pounds
  • Overall dimensions:
    • Length: approximately 72 inches
    • Width: approximately 41 inches
    • Height: approximately 96 inches
  • Stainless steel construction
  • 0.5 horsepower motor
  • Electrical: 208-230/460 volts, 60 hz, phase 3
Skidding, Rigging, and Loading Fee: $120.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Hobart 4356 Stainless Steel Mixer Grinder

Lot # 124      

Used Hobart 4356 Mixer Grinder with:

  • Production rate: up to 160 pounds per minute
  • Capacity: 500 pounds
  • Overall dimensions:
    • Length: approximately 72 inches
    • Width: approximately 41 inches
    • Height: approximately 96 inches
  • Stainless steel construction
  • 0.5 horsepower motor
  • Electrical: 208-230/460 volts, 60 hz, phase 3
Skidding, Rigging, and Loading Fee: $156.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Vemag Stainless Steel Smoke Generator

Lot # 125      

Used Vemag Smoke Generator with:

  • Agitated hopper
    • 35 inch width
    • 32 inch depth
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Schroeter Smoke Generator

Lot # 132      

Used Shroeter Smoke Generator with:

  • Agitated hopper
    • Diameter: 24 inches
    • Depth: 22 inches
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Stainless Steel Smoke Generator

Lot # 133      

Used Smoke Generator with:

  • Agitated Hopper:
    • Diameter: 30 inches
    • Depth: 28 inches
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $79.30
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Stainless Steel Smoke Generator

Lot # 134      

Used Smoke Generator with:

  • Agitated Hopper:
    • Diameter: 30 inches
    • Depth: 28 inches
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Vemag Stainless Steel Smoke Generator

Lot # 135      

Vemag Smoke Generator:

  • Top load agitated hopper
    • Diameter: 32 inches
    • Depth: 23 inches
  • Side mounted exhaust
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $79.30
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 6

1.178.0.1875.f3727f4.8.159