Helicopter Transportable Drilling Rigs 1500 HP
Bidding ends Thursday, August 31, 2017 | 1:00 PM Central
Auction closed.
Helicopter Transportable Drilling Rigs 1500 HP
Bidding ends Thursday, August 31, 2017 | 1:00 PM Central
Auction closed.
Internet Premium:
See Special Terms for additional fees
See Special Terms for additional fees
Description
This lot of Honghua Drilling Rigs has not been used, are no longer needed for the company's operations and are being sold to recover funds.
x Cancel
Closed Lots
Helicopter Transportable Drilling Rigs 1500 HP (2 Units)
Quantity: 2
This lot of Honghua Drilling Rigs has not been used, are no longer needed for the company's operations and are being sold to recover funds.
- Original Wholesale Value: $30,000,000. Manufacturer: Honghua
- Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig with 3000 Kg loads, drilling depth capacity 12000 ft (4.000 m) MAST
- Model: JJ320/45-KH
- Effective height of mast: 146 ft (44,5 m)
- Static hook load capacity: 716.800 lbs (3.200 kN) CROWN BLOCK
- Model TC320, manufactured by HongHua
- Max. Load: 716.800 Lbs. (3.200kN)
- No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and 1x60”) MONKEY BOARD
- Able to work with DP 5” Range II, with Fall Protection Safety Harness System, Escape Line (Geronimo) and Ingersoll Rand Man Rider winch. SUBESTRUCTURE
- Max. Capacity of Rotary Table beam: (320 ton)
- Setback load (Range II, 5” drill pipe): (3200 kN)
- Height of drill floor: 7,5 m (25 ft)
- Prepared to receiveWalker System removable by
- Pins, moveable in two axis “X” and “Y”. ROTARY TABLE
- Pin Drive type, manufactured by HongHua, with opening diameter of 27-1/2" (698.5 mm), maximum rotary speed of 220 RPM and maximum static load of 1.000.000 lbs (4500 kN). DRAW-WORKS
- DiskBrake type, actuated by 2 electric motors with minimum 870 HP each and Bit Feeder system (with proximity switch for the crown Block and Rotary Table).
- Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft) Drill Line 32 mm (1-1/4”) 6×19S IWRC EIPS/RRL.
- Cat Head Model YM-16, manufactured by HongHua. TRAVELLING BLOCK
- Model YC315, manufactured by HongHua, with 6 Sheaves and maximum static load capacity of (3500kN) (790,000 lb). HOOK
- Model DG315, manufactured by HongHua, built to specification API Spec 8C, with maximum static load capacity of 790,000 lb. (3.500 kN) RIG FLOOR TOOLS
- Inside BOP’s 3 ½IF – 4 ½IF, DP Elevator 3 ½” – 5”, pneumatic pipe spinner casing, manual slips. DP. 3 ½” – 5”, automatic DP. Slips, Casing: Spiders, side door, elevators, aux. elevators, slips, HFD. C56. Tong DP. Mud saver. GENSETS
- 8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW/ 60Hz / 480V, with sound proof enclosures. AUXILIAR GENERATORS
- 2 sets of Cooltech Generator Model KJ200E, rated 200 KVA(160 KW). Condition:
- The equipment was purchased 5 years ago, but has never been used.
- It was manufactured in China -> shipped to Brazil -> and eventually shipped to Houston.
- It has never been turned on, used or tested.
- These two rigs were part of a set of four. Rigs 3 and 4 have already been sold. They were tested and worked perfectly. Rigs 1 and 2 have NOT been tested.
- Each unit comes with 8 CAT generators.
- It has all parts, but it does not come with a drill string.
- **Please see Images for more details** Note: Bid acceptance is pending seller's review. Seller has the right to reject all bids.
