Used In Shipping Box Icom IC-746PRO HF/VHF All Mode Ham Radio Transceiver & Icon PS-125 Power Supply

{local pickup or in house shipping available} also 1- HM-36 Microphone. THE TRANSCEIVER POWERS UP This Item Is Used And Sold As Is No Warranty Expressed or Implied. Only Icom brings you Twin Passband tuning! Tailor your IF passband with the Twin PBT by electronically shifting the upper and lower IF passbands. Depending on the use of the concentric knobs, you can either narrow the IF passband, or shift the entire passband to eliminate interfering signals. Interference management is not a problem with the Manual Notch filter. With it?s incredible 70dB attenuation, the manual notch can eliminate a wide variety of QRM. The Automatic Notch Filter can track two or more interfering signals like Heterodynes and ?Key uppers?, By digitally manipulating the incoming signal, the DSP is able to reduce various types of noise and enhances the receive signal components. Providing an outstanding signal to noise ratio to give clean, clear audio. Another first in this class of transceiver, the IC-746PRO incorporates a multiple AGC loop management system, which uses the DSP filtering to remove unwanted signals from the AGC control. This means, if an unwanted signal is removed using the DSP, the AGC will not be affected. In other words, ?No more pumping of the AGC!? Also, the AGC is independently controllable for mode and the time settings. (Off, 0.1-6.0 or 8.0 sec.) Bring Hi-Fidelity to the amateur airwaves. The Microphone Equalizer will change your RST from ?59? to ?Great Audio? and ?Nice Signal?. Adjust your audio for Bass and Treble characteristics to total 121 levels for all voice operation. The transmit filter width in SSB mode is selectable from 2.8/2.4/2.2kHz.The Rx tone control is also an equalizer for the received audio. As with the transmit audio, select the amount of Bass and Treble you need for the audio clarity you want. Need more punch in your signal; the Icom Digital RF Speech Compression gives you all you need without fuss and noise. Great for breaking through QRM. I Could Go On & On Or You Could Just Look This Transceiver UP. The Icom PS-125 {No Box Or Papers, switching power supply provides 13.8 VDC ... 5%, at 25 amps. The input voltage is 120 VAC (85-135 VAC). The PS-125 may be configured as a tall or short power supply based on how the rubber feet are attached. The logo may be applied at either angle. The output cord features the Molex plug prewired for many Icom radios. Both One Money